- ripe-atlas - mailman.ripe.net

atlas.ripe.net service migration
by Christopher Amin 24 Jul '25

24 Jul '25

Dear colleagues, The scheduled maintenance on atlas.ripe.net was successfully completed earlier today, with a short-lived minor impact on API requests. For details, please see the status page entry: https://status.ripe.net/incidents/jv6wtx5s71rg Regards, Chris Amin RIPE NCC

1 0

really strange hop situation on 1006475
by Marco Moock 23 Jul '25

23 Jul '25

Hello! Probe 1006475 has really interesting results: RESOLVED tr.dorfdsl.de TO 2a01:170:118f:30::100 STARTED QUERY AT 2025/07/23 14:52:56 UTC Fetching Measurement: 119451691 Traceroute from 2405:8d40:48d9:592f:10b8:22ff:fe88:a416 to 2a01:170:118f:30::100 (2a01:170:118f:30::100): 1 fd8d:b030:165f::1 8.901ms 0.79ms 0.762ms 2 tr.dorfdsl.de (2a01:170:118f:30::100) 268.925ms 262.384ms 262.513ms This cannot be true as my system is far away. I also receive that packet, so it is not a simulation etc. This is the situation from the other direction: m@tr:~$ sudo traceroute -I 2405:8d40:48d9:592f:10b8:22ff:fe88:a416 traceroute to 2405:8d40:48d9:592f:10b8:22ff:fe88:a416 (2405:8d40:48d9:592f:10b8:22ff:fe88:a416), 30 hops max, 80 byte packets 1 2a01:170:118f:30::1 (2a01:170:118f:30::1) 1.164 ms 2.235 ms 2.309 ms 2 2a01:170:0:10::1 (2a01:170:0:10::1) 10.751 ms 10.853 ms 10.816 ms 3 * * * 4 * * * 5 * * * 6 ffm-bb1-v6.ip.twelve99.net (2001:2034:1:6b::1) 10.444 ms 11.857 ms 11.418 ms 7 mei-b5-v6.ip.twelve99.net (2001:2034:0:15a::1) 26.477 ms 41.573 ms 41.224 ms 8 sng-b7-v6.ip.twelve99.net (2001:2034:0:14::1) 197.873 ms 197.940 ms 196.175 ms 9 * * * 10 ditona-ic-388046.ip.twelve99-cust.net (2001:2035:0:28f0::2) 194.862 ms 194.751 ms 194.879 ms 11 2405:8d40:2:103b::3 (2405:8d40:2:103b::3) 230.238 ms 230.303 ms 230.253 ms 12 2405:8d40:0:1002::2 (2405:8d40:0:1002::2) 222.359 ms 222.388 ms 222.404 ms 13 2405:8d40:3:1004::3 (2405:8d40:3:1004::3) 256.477 ms 248.020 ms 247.930 ms 14 2405:8d40:103:1013::3 (2405:8d40:103:1013::3) 242.521 ms 244.766 ms 243.801 ms 15 2405:8d40:a38:20b3::4d (2405:8d40:a38:20b3::4d) 243.622 ms 244.194 ms 244.200 ms 16 2405:8d40:48d9:592f:569:347b:29b8:4da3 (2405:8d40:48d9:592f:569:347b:29b8:4da3) 261.501 ms 271.957 ms 275.285 ms 17 2405:8d40:48d9:592f:10b8:22ff:fe88:a416 (2405:8d40:48d9:592f:10b8:22ff:fe88:a416) 255.513 ms 249.852 ms 248.217 ms m@tr:~$ Does anyone have a clue what is going on? Traffic manipulation at the remote ISP? -- Gruß Marco Send unsolicited bulk mail to 1753282214muell(a)stinkedores.dorfdsl.de

1 0

Offset of NTP measurement
by Marco Davids (SIDN) 23 Jul '25

23 Jul '25

I noticed a discrepancy between the output of my own tool and RIPE Atlas. My tool reports the offset as a negative value, while RIPE Atlas shows a positive one. For example: https://atlas.ripe.net/measurements/115803954/results Any thoughts? -- Marco

7 10

Possible Corner Case Bug in RIPE Atlas NTP Measurement
by Marco Davids 22 Jul '25

22 Jul '25

Dear RIPE Atlas team, I believe we may have discovered a corner case bug in the way RIPE Atlas handles NTP measurements. The issue surfaced during experiments with my NTP simulator — a small tool that mimics an NTP server and allows for controlled manipulation of its behavior. In one particular scenario, the simulator randomly varies the poll value in each response. While this doesn’t occur frequently in real-world implementations, it is technically valid behavior. It appears, however, that either the probes or the measurement system itself do not expect the poll value to change across responses. When initiating a measurement with the default setting of 3 packets, and each response has a different poll value, the result is that the measurement ends up reporting nothing. I first described this on the RIPE Atlas mailing list: https://mailman.ripe.net/archives/list/ripe-atlas@ripe.net/thread/33KNP7KPX… A detailed analysis can be found here: https://mailman.ripe.net/archives/list/ripe-atlas@ripe.net/message/OSRNUJ2Y… The NTP simulator is publicly reachable at: ntp1.testdns.nl I'd appreciate it if you could take a look. Thank you in advance for your time and consideration! Kind regards, -- Marco Davids SIDN Labs

1 0

Re: Atlas probes not reporting NTP results on ntp0.testdns.nl ?
by Marco Davids 22 Jul '25

22 Jul '25

Hi Joachim, Thanks again for your work and the promising findings! I’ve updated the settings of the NTP simulator (now running at ntp1.testdns.nl) to keep the poll value fixed, and I’ve created a new measurement with 50 probes, each sending 10 packets per interval: https://atlas.ripe.net/measurements/118724341 And indeed — things already look a lot better! So... did we just find a bug? Best, -- Marco -------- Original Message -------- *Subject: *[atlas] Re: Atlas probes not reporting NTP results on ntp0.testdns.nl ? *From: *Joachim Kroß *To: *"Marco Davids (SIDN)" , ripe-atlas(a)ripe.net *Date: *Thu, 17 Jul 2025 15:30:35 +0200 > When multiple packets are sent per sample (default is to send three), > those are currently sent back to back. I.e., unless there is packet > loss, the second and third request are sent as soon as the response to > the previous request has been received. As consequence, the values of > the majority of fields in the responses are typically the same, e.g., > ref-id, poll, precision, stratum, version, mode, even ref-ts. As such, > they are at the top level of the JSON object. And the "result" structure > only has the fields that vary between the packets, i.e., the timestamps > related to the actual packet transmissions (and derived values). > > With the explicitly misbehaving server, however, some of the fields that > would typically not change between back-to-back responses, or rather > rarely only, _do_ change from one response to the next. E.g., the poll > and precision fields. In those cases, there still is an entry at the top > level of the JSON object, I guess perhaps derived from the first packet. > But then, the result structure would additionally have entries for those > types of fields where the value differs from the one at the top level.

1 1

Atlas UI and Docs updates
by Stephen Suess 22 Jul '25

22 Jul '25

Hello Atlas friends, We just released an update to the UI that includes the following new features (in addition to other changes and fixes): - NEW: Probe detail: Resolve geo location dispute - NEW: Measurement Detail: Add link out to new troubleshooting doc when any msm has no replies - NEW: Prefs: set preferred address family (v4/v6) for use in forms and charts when possible For the full list of what has changed, you can check out the release notes here: https://atlas.ripe.net/docs/releases/website_index/2025-03-25 We have also just released a new docs system based on vitepress: https://atlas.ripe.net/docs/ As always, we hope you find these changes useful and we welcome your feedback. Kind regards, Stephen Atlas UI

6 16

Atlas probes not reporting NTP results on ntp0.testdns.nl ?
by Marco Davids (SIDN) 18 Jul '25

18 Jul '25

Dear list, If anyone knows, or is able to figure out, why most (but not all) Atlas probes don’t report results for NTP measurements to ntp0.testdns.nl, I’d appreciate your insights. Examples: https://atlas.ripe.net/measurements/116922622/ https://atlas.ripe.net/measurements/116946257/ https://atlas.ripe.net/measurements/116830921/ Ping works: https://atlas.ripe.net/measurements/116921717/ Thanks in advance. -- Marco

5 11

Re: Atlas probes not reporting NTP results on ntp0.testdns.nl ?
by Marco Davids (SIDN) 17 Jul '25

17 Jul '25

Hi Joachim, Thank you for looking into this! On Thu, 17 Jul 2025 15:30:35 +0200 Joachim Kroß wrote: > It seems the explicitly misbehaving server has been replaced by a more > sane one (albeit apparently not synchronized) Oh, yes that's correct - sorry for that. I started doing some tests with an NTPv5 enabled Chrony server. The NTP simulator is still available on another server though, albeit IPv6 only (because such VM's are so much cheaper): ntp1.testdns.nl. For those interested; my simple NTP simulator is here: https://github.com/mdavids/ntptools/tree/main/go/fake-ntp-server A version that allows to simulate jitter and clock drift is here: https://github.com/mdavids/ntptools/tree/main/go/fake-ntp-server-2 Just a few simple experiments, mostly the result of a bit of vibe coding. -- Marco

1 0

Asking for credits for a university project
by Serban Orza 16 Jul '25

16 Jul '25

Hello, Atlas community! I am Serban Orza, a second-year Computer Science student at Delft University of Technology. Together with another 4 students, we are working on an open-source project that measures the accuracy and reliability of NTP servers. We already implemented the basics, but we would like to integrate RIPE Atlas to have a global perspective and to avoid the bias of a single measurement point. We would appreciate it a lot if somebody could provide us with some RIPE API credits to perform measurements and analyze the reachability of NTP servers. My account at RIPE NCC is on this email: orza(a)student.tudelft.nl Thank you! Serban

10 14

sw-probe reducing syslog messages
by Hans Mayer 14 Jul '25

14 Jul '25

Dear All, I am running the package ripe-atlas 1.5-3 on Debian 12 bookworm with probe id 1010735. Is there a way to reduce the syslog messages for really necessary events like errors ? Kind regards Hans --

2 1