Here are the draft minutes of the WG session at RIPE 25. Thanks to Mike Norris for taking them. Comments to the draft minutes are welcome, the final version will be circulated next week. Joachim ------ RIPE 25, Amsterdam Routing Working Group Report of Meeting, 23rd September 1996 1. Opening and Administrivia Willem van der Scheun, Chairman, presided and welcomed people to the meeting. There were 89 attenders. Mike Norris took minutes. 2. Agenda bashing A draft agenda of business, circulated by the Chairman in the previous week, was agreed. 3. Chairman of the Routing WG Willem announced that his day job prevented him from devoting the time necessary to chairmanship of the WG and that he was standing down. He was pleased to say that Joachim Schmitz would accept his proposal to be Chairman, and this proposal was endorsed by the meeting. Members thanked Willem for his work as Chairman and guidance of the WG. Joachim chaired the remainder of the meeting. 4. Report from the RIPE NCC Daniel Karrenberg said that the RIPE NCC planned to resume its studies of route aggregation. An exercise he had conducted earlier in 1996 and reported to RIPE 24 had revealed plenty of room for improvement. Individual reports to those responsible for over-specific routing had resulted in significant improvements. Since then, however, the aggregation situation had disimproved. Daniel's impression was that some ISPs didn't care or wouldn't take the trouble to correct matters. Further remedial action was needed and the Contributors' Committee supported the NCC in this work. Skilled staff would soon be appointed and they would help ISPs in promoting route aggregation. While neither RIPE nor the NCC could take action against any offenders, the use of peer pressure among the ISPs could be used in a positive manner to improve the position. The meeting encouraged ISPs to supply BGP data to the NCC on request for the purpose of analysing route aggregation. New Action: the NCC would report on route aggregation at RIPE 26. 5. Working Experience with Route Object Editor (ROE) ftp://ftp.ripe.net/ripe/presentations/ripe-m25-jschmitz-work-exp-roe.html Joachim Schmitz reported on his experience with ROE. This was part of the RA Toolset and had been written by Cengiz Alaettinoglu. Its purpose was to view and manipulate route objects and to compare them with operational routes. It worked on routes as objects from Internet routing registries (IRRs) and as determined from routers (by means of input BGP tables). Compiled with C++ in a Tcl/Tk environment, ROE was easy to instal. With its GUI it was easy to use. As not all IRRs were aligned in the way they worked, ROE displayed separate route registrations where appropriate. Joachim found it slow in operation, although Cengiz later indicated that this was probably due to network and server performance and not to the ROE program execution. It was also not clear to Joachim whether live or mirrored IRR data was used. He suggested that the program could be improved by allowing more configuration options and greater clarity in some of the messages. This and other feedback should be directed to Cengiz. Overall, he recommended ROE for operational use, particularly for complex routing tasks. 6. Progressive BGP route flap dampening ftp://ftp.ripe.net/ripe/presentations/ripe-m25-tbarber-bgp-damp.html Tony Barber gave a presentation on the strategies used by UUnet-Pipex to reduce the effects of route flapping and to try to prevent router table overflow. These were: - route dampening - prefix filtering - more router memory They had encountered many instabilities from peers and found that many ISPs had not deployed CIDR; this gave rise to more flapping as more routes, and particularly more specific ones, were advertised. Tony explained the parameters used for route dampening on a Cisco router. He had arrived at the following re-use times for various route sizes: /24 and greater ~160 minutes /23 and /22 ~60 minutes /21 and less ~30 minutes He recommended filtering out all prefixes more specific than /24. While route dampening consumed router memory, this was more or less balanced by a reduction in routing CPU cycles. He recommended that if route dampening was to be widely deployed in Europe, consistency was important. In this sense, the Routing WG should agree on guidelines for parameters to be used. In discussion, the following points were made: - aggregation works in reducing router load and route flapping. - route flapping is often a feature of certain autonomous systems rather than a function of prefix length. - much instability was due to configuration changes and errors as distinct from link failures. - making dampening dependent on prefix length could penalise many stable /24s. - it might be useful to discriminate against /24s in the 192.0.0.0/8 block (the swamp). - the focus should be on keeping noise out of the system rather than trying to mitigate against it once in the system. In summary, it was agreed that route dampening was an important topic and that more discussion was needed. 7. Routing Policy analysis tools http://www.isi.edu/ra/Presentations Cengiz Alaettinoglu of ISI presented a review of recent developments and updates in the RA toolset, now at version 3.4.0. The set of front-end tools used a number of back-end libraries, which made program development easier. It required RAWhoisd v3.0 and had been ported to several operating systems. Cengiz gave details of availability (URL = http://www.isi.edu/ra/RAToolSet as official reference or copies also available from ftp://ftp.isi.edu/pub/cengiz/RAToolSet-3.4.0.tar.gz or ftp://ftp.ra.net/routing.arbiter/tools/RAToolSet/RAToolSet-3.4.0.tar.gz ) and of the mailing list (ratoolset@isi.edu). The toolset was made available for demonstration purposes to attenders of RIPE 25. RtConfig generated the BGP access list part ofrouter configuration from route objects. It was now used in production by some major network operators. ROE was again shown, with reference to review options before submitting a changed route object. The AS object editor (AOE) was not implemented, though it was on demo at RIPE 25. CIDRAdvisor identifies 'safe' aggregates by route originators as well as aggregates for proxies. Cengiz showed the effects of using various radius values for the distance that aggregation should hold. Summary of Actions ------------------ Action 22.10 on Joachim Schmitz To trigger the discussion on the mailing list of the Routing WG, which focus to choose for a future tool development project and to come to consensus on it Action 24.4 on Joachim Schmitz To investigate the status of the CIDR FAQ and see whether additions are needed, probably by triggering a discussion on the mailing list New action on Daniel Karrenberg/RIPE NCC To report on the results from the route aggregation analysis on the 26th RIPE meeting New action on Joachim Schmitz To coordinate making the presentations at the Routing WG available Mike Norris 23/9/96 _____________________________________________________________________________ Dr. Joachim Schmitz schmitz@noc.dfn.de DFN Network Operation Center Rechenzentrum der Universitaet Stuttgart ++ 711 685 5553 voice Allmandring 30 ++ 711 678 8363 FAX D-70550 Stuttgart FRG (Germany) _____________________________________________________________________________