- routing-wg - mailman.ripe.net

The Top 20 and some deltas
by Tony Bates 18 Aug '94

18 Aug '94

This is an auto-generated mail on Wed Aug 17 21:00:00 MET DST 1994 This is a list of the "Top 20" players who if CIDRizing at the AS level could make a significant gain in the size of Internet routing tables. This may be an over-estimation but it is hoped that this can act as an incentive for the "Top 20" and others to look at their CIDR capability. A full summary of all the ASes seen in the Internet can be seen by looking in: ftp.ripe.net:cidr/stats/AS* As stated above this is auto-generated so it is not checked before it leaves my workstation. Please also find a summary of the last weeks changes in terms of withdrawn and added routes. Please note that this is only a snapshot but does some indication of ASes participating in CIDR. More information can be found in: ftp.ripe.net:cidr/stats/Delta.* Also, for a short time this gives details of any possibly interesting aggregates currently seen in the routing. Interesting here means not a aggregate made as a chuck of classful routes. This a daily snaphost of changes in classfull routes being withdrawn and added. the deltas are calculated over a rolling 8 day period. Please bear in mind this is purely a "snapshot" and a large flucuation could be caused by a connectivity problem for example. However, this does give some indication of service providers that are moving to classless routing. Top 20 Withdrawn Routes from 10Aug94 to 17Aug94 -83 AS19 CSS-DOMAIN -45 AS3609 CYBER-NET -44 AS1849 PIPEX, Public IP EXchange -40 AS2907 SINET-AS -29 AS1729 TIPnet -25 AS760 University of Vienna, Austria -19 AS137 GARR -18 AS1250 SINGAPORE-AS -9 AS719 LANLINK autonomous system -8 AS679 Technical University Vienna LAN -7 AS1741 FUNET autonomous system -6 AS2136 PCC-TECHNO-AS -5 AS3354 THENET-AS-1 -4 AS3407 INTERPATH-NC -3 AS2605 CESNET backbone B - EMPB -2 AS3578 MV-1 -1 AS175 AFWL-AS Top 20 Added Routes from 10Aug94 to 17Aug94 151 AS1740 CERFNET 83 AS568 SUMNET-AS 82 AS279 SURANET-AS-2 76 AS86 SURANET-AS 69 AS701 AlterNet 38 AS97 JVNC-AS 26 AS174 NYSERNET-AS 23 AS2044 WORLDNET-AS 15 AS372 NSN-AMES-AS 12 AS93 MIDNET-AS 11 AS2915 SPIN-NET 10 AS560 NEARNET-EXT-AS 9 AS1267 I2U Autonomous System 8 AS2699 BBN-DSI1 7 AS1225 CICNET3-AS 6 AS2637 GEORGIA-TECH 5 AS3113 DOC-ESA-ASN 4 AS2548 DIGEX-AS 3 AS1793 SPRINTLINK5 2 AS1103 SURFnet IP List of possibly interesting aggregates --------------------------------------- aggregate origin-AS 17.127.4.0/22 AS1791 193.195.1.4/30 AS786 193.232.88.16/28 AS1803 194.46.1.4/30 AS2873 194.46.17.4/30 AS2873 Here follows the last weeks "Top 20" list with the corresponding date. --- 17Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1161 612 549 47.3% AlterNet AS174 1351 959 392 29.0% NYSERNET-AS AS372 1181 845 336 28.5% NSN-AMES-AS AS19 639 398 241 37.7% CSS-DOMAIN AS1270 466 243 223 47.9% EUnet/DE AS560 583 416 167 28.6% NEARNET-EXT-AS AS279 490 355 135 27.6% SURANET-AS-2 AS1740 487 361 126 25.9% CERFNET AS1250 242 117 125 51.7% SINGAPORE-AS AS1275 313 202 111 35.5% DFN-IP AS97 398 289 109 27.4% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 189 100 89 47.1% CSUNET-SW AS786 301 220 81 26.9% The JANET IP Service AS1849 275 201 74 26.9% PIPEX, Public IP EXchange AS1955 143 72 71 49.7% Computer and Automation Institute AS1239 363 292 71 19.6% SprintLink AS568 244 180 64 26.2% SUMNET-AS AS209 317 256 61 19.2% WESTNET-EAST AS2493 135 75 60 44.4% FONOROLA-EAST --- 16Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1151 612 539 46.8% AlterNet AS174 1351 951 400 29.6% NYSERNET-AS AS372 1166 833 333 28.6% NSN-AMES-AS AS1270 465 242 223 48.0% EUnet/DE AS19 719 537 182 25.3% CSS-DOMAIN AS560 580 412 168 29.0% NEARNET-EXT-AS AS1740 491 365 126 25.7% CERFNET AS1250 244 121 123 50.4% SINGAPORE-AS AS279 452 330 122 27.0% SURANET-AS-2 AS97 398 287 111 27.9% JVNC-AS AS1275 313 202 111 35.5% DFN-IP AS1849 325 220 105 32.3% PIPEX, Public IP EXchange AS2150 188 99 89 47.3% CSUNET-SW AS271 178 96 82 46.1% BCNET-AS AS786 299 221 78 26.1% The JANET IP Service AS1955 143 72 71 49.7% Computer and Automation Institute AS1239 362 291 71 19.6% SprintLink AS2493 133 73 60 45.1% FONOROLA-EAST AS86 341 282 59 17.3% SURANET-AS AS2907 185 126 59 31.9% SINET-AS --- 15Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1149 610 539 46.9% AlterNet AS174 1314 944 370 28.2% NYSERNET-AS AS372 1168 834 334 28.6% NSN-AMES-AS AS1270 460 237 223 48.5% EUnet/DE AS19 772 568 204 26.4% CSS-DOMAIN AS560 573 406 167 29.1% NEARNET-EXT-AS AS1740 489 365 124 25.4% CERFNET AS279 447 327 120 26.8% SURANET-AS-2 AS1250 237 123 114 48.1% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS1849 323 220 103 31.9% PIPEX, Public IP EXchange AS97 385 289 96 24.9% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 180 89 91 50.6% CSUNET-SW AS786 301 220 81 26.9% The JANET IP Service AS1955 143 72 71 49.7% Computer and Automation Institute AS1239 358 287 71 19.8% SprintLink AS209 316 257 59 18.7% WESTNET-EAST AS86 338 280 58 17.2% SURANET-AS AS2907 176 119 57 32.4% SINET-AS --- 14Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1151 612 539 46.8% AlterNet AS174 1321 936 385 29.1% NYSERNET-AS AS372 1137 815 322 28.3% NSN-AMES-AS AS1270 460 237 223 48.5% EUnet/DE AS19 755 559 196 26.0% CSS-DOMAIN AS560 577 409 168 29.1% NEARNET-EXT-AS AS1275 312 201 111 35.6% DFN-IP AS279 421 314 107 25.4% SURANET-AS-2 AS1849 324 220 104 32.1% PIPEX, Public IP EXchange AS97 383 282 101 26.4% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 180 89 91 50.6% CSUNET-SW AS1250 208 120 88 42.3% SINGAPORE-AS AS786 301 220 81 26.9% The JANET IP Service AS1955 143 72 71 49.7% Computer and Automation Institute AS1239 356 285 71 19.9% SprintLink AS209 317 256 61 19.2% WESTNET-EAST AS2907 187 127 60 32.1% SINET-AS AS86 339 281 58 17.1% SURANET-AS AS2493 129 72 57 44.2% FONOROLA-EAST --- 13Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1149 614 535 46.6% AlterNet AS174 1343 949 394 29.3% NYSERNET-AS AS372 1152 826 326 28.3% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 754 563 191 25.3% CSS-DOMAIN AS560 579 413 166 28.7% NEARNET-EXT-AS AS1275 312 201 111 35.6% DFN-IP AS279 424 317 107 25.2% SURANET-AS-2 AS1849 323 220 103 31.9% PIPEX, Public IP EXchange AS97 354 260 94 26.6% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 181 90 91 50.3% CSUNET-SW AS1250 206 116 90 43.7% SINGAPORE-AS AS786 299 221 78 26.1% The JANET IP Service AS1955 142 71 71 50.0% Computer and Automation Institute AS1239 359 288 71 19.8% SprintLink AS2907 185 124 61 33.0% SINET-AS AS86 340 281 59 17.4% SURANET-AS AS209 312 253 59 18.9% WESTNET-EAST AS137 167 110 57 34.1% GARR --- 12Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1141 609 532 46.6% AlterNet AS174 1329 946 383 28.8% NYSERNET-AS AS372 1193 855 338 28.3% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 704 530 174 24.7% CSS-DOMAIN AS560 580 412 168 29.0% NEARNET-EXT-AS AS1250 269 138 131 48.7% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 411 305 106 25.8% SURANET-AS-2 AS1849 325 221 104 32.0% PIPEX, Public IP EXchange AS271 206 109 97 47.1% BCNET-AS AS97 360 266 94 26.1% JVNC-AS AS2150 189 99 90 47.6% CSUNET-SW AS786 301 220 81 26.9% The JANET IP Service AS1955 143 72 71 49.7% Computer and Automation Institute AS1239 357 286 71 19.9% SprintLink AS209 332 270 62 18.7% WESTNET-EAST AS2907 185 125 60 32.4% SINET-AS AS549 206 150 56 27.2% ONET-AS AS2493 129 73 56 43.4% FONOROLA-EAST --- 11Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1135 606 529 46.6% AlterNet AS174 1341 954 387 28.9% NYSERNET-AS AS372 1149 821 328 28.5% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 726 542 184 25.3% CSS-DOMAIN AS560 575 408 167 29.0% NEARNET-EXT-AS AS1250 269 135 134 49.8% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 414 307 107 25.8% SURANET-AS-2 AS1849 324 220 104 32.1% PIPEX, Public IP EXchange AS97 363 264 99 27.3% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 183 97 86 47.0% CSUNET-SW AS786 301 220 81 26.9% The JANET IP Service AS1239 359 288 71 19.8% SprintLink AS1955 142 72 70 49.3% Computer and Automation Institute AS2907 190 130 60 31.6% SINET-AS AS549 207 151 56 27.1% ONET-AS AS1329 105 49 56 53.3% NSFNETTEST34-AS AS137 165 110 55 33.3% GARR --- 10Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1092 604 488 44.7% AlterNet AS174 1325 933 392 29.6% NYSERNET-AS AS372 1166 834 332 28.5% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 722 537 185 25.6% CSS-DOMAIN AS560 573 409 164 28.6% NEARNET-EXT-AS AS1250 260 131 129 49.6% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS1849 319 215 104 32.6% PIPEX, Public IP EXchange AS279 408 305 103 25.2% SURANET-AS-2 AS97 360 262 98 27.2% JVNC-AS AS271 196 104 92 46.9% BCNET-AS AS2150 189 99 90 47.6% CSUNET-SW AS786 297 216 81 27.3% The JANET IP Service AS1955 142 71 71 50.0% Computer and Automation Institute AS1239 361 290 71 19.7% SprintLink AS209 320 259 61 19.1% WESTNET-EAST AS2907 180 121 59 32.8% SINET-AS AS549 207 151 56 27.1% ONET-AS AS1329 104 48 56 53.8% NSFNETTEST34-AS

2 2

The Top 10
by Tony Bates 12 Aug '94

12 Aug '94

This is an auto-generated mail on Fri Aug 12 18:10:00 MET DST 1994 This is a list of the "Top 10" players who if CIDRizing at the AS level could make a significant gain in the size of Internet routing tables. This may be an over-estimation but it is hoped that this can act as an incentive for the "Top 10" and others to look at their CIDR capability. A full summary of all the ASes seen in the Internet can be seen by looking in: ftp.ripe.net:cidr/stats/AS* As stated above this is auto-generated so it is not checked before it leaves my workstation. Please also find a summary of the last weeks changes in terms of withdrawn and added routes. Please note that this is only a snapshot but does some indication of ASes participating in CIDR. More information can be found in: ftp.ripe.net:cidr/stats/Delta.* Top 10 Withdrawn Routes from 05Aug94 to 12Aug94 -42 AS2900 WN-AZ -29 AS1729 TIPnet -20 AS1239 SprintLink -16 AS1754 DESY-HAMBURG -8 AS555 MSCNET-AS -7 AS2865 NATVERK-C, UDAC -5 AS19 CSS-DOMAIN -4 AS86 SURANET-AS -3 AS611 CANET11-AS -2 AS3578 MV-1 Top 10 Added Routes from 05Aug94 to 12Aug94 52 AS701 AlterNet 35 AS210 WESTNET-WEST 23 AS2493 FONOROLA-EAST 21 AS174 NYSERNET-AS 14 AS568 SUMNET-AS 13 AS1793 SPRINTLINK5 12 AS93 MIDNET-AS 11 AS1225 CICNET3-AS 10 AS35 MICATON 9 AS1759 The DataNet IP Service Here follows the last weeks "Top 10" list with the corresponding date. --- 12Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1141 609 532 46.6% AlterNet AS174 1329 946 383 28.8% NYSERNET-AS AS372 1193 855 338 28.3% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 704 530 174 24.7% CSS-DOMAIN AS560 580 412 168 29.0% NEARNET-EXT-AS AS1250 269 138 131 48.7% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 411 305 106 25.8% SURANET-AS-2 AS1849 325 221 104 32.0% PIPEX, Public IP EXchange --- 11Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1135 606 529 46.6% AlterNet AS174 1341 954 387 28.9% NYSERNET-AS AS372 1149 821 328 28.5% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 726 542 184 25.3% CSS-DOMAIN AS560 575 408 167 29.0% NEARNET-EXT-AS AS1250 269 135 134 49.8% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 414 307 107 25.8% SURANET-AS-2 AS1849 324 220 104 32.1% PIPEX, Public IP EXchange --- 10Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1092 604 488 44.7% AlterNet AS174 1325 933 392 29.6% NYSERNET-AS AS372 1166 834 332 28.5% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 722 537 185 25.6% CSS-DOMAIN AS560 573 409 164 28.6% NEARNET-EXT-AS AS1250 260 131 129 49.6% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS1849 319 215 104 32.6% PIPEX, Public IP EXchange AS279 408 305 103 25.2% SURANET-AS-2 --- 09Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1132 609 523 46.2% AlterNet AS174 1343 933 410 30.5% NYSERNET-AS AS372 1179 841 338 28.7% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 721 537 184 25.5% CSS-DOMAIN AS560 574 408 166 28.9% NEARNET-EXT-AS AS1250 269 143 126 46.8% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 409 301 108 26.4% SURANET-AS-2 AS1849 316 212 104 32.9% PIPEX, Public IP EXchange --- 08Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1096 605 491 44.8% AlterNet AS174 1305 932 373 28.6% NYSERNET-AS AS372 1183 841 342 28.9% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 716 535 181 25.3% CSS-DOMAIN AS560 575 409 166 28.9% NEARNET-EXT-AS AS1275 312 201 111 35.6% DFN-IP AS279 412 303 109 26.5% SURANET-AS-2 AS1849 319 215 104 32.6% PIPEX, Public IP EXchange AS97 356 259 97 27.2% JVNC-AS --- 07Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1096 605 491 44.8% AlterNet AS174 1290 922 368 28.5% NYSERNET-AS AS372 1313 949 364 27.7% NSN-AMES-AS AS568 801 544 257 32.1% SUMNET-AS AS1270 437 228 209 47.8% EUnet/DE AS560 570 405 165 28.9% NEARNET-EXT-AS AS200 469 342 127 27.1% BARRNET-AS AS1275 312 201 111 35.6% DFN-IP AS279 412 303 109 26.5% SURANET-AS-2 AS1849 316 214 102 32.3% PIPEX, Public IP EXchange --- 06Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1098 605 493 44.9% AlterNet AS174 1310 929 381 29.1% NYSERNET-AS AS372 1142 823 319 27.9% NSN-AMES-AS AS1270 461 238 223 48.4% EUnet/DE AS19 723 540 183 25.3% CSS-DOMAIN AS560 576 410 166 28.8% NEARNET-EXT-AS AS1275 312 201 111 35.6% DFN-IP AS1250 247 137 110 44.5% SINGAPORE-AS AS279 410 302 108 26.3% SURANET-AS-2 AS1849 312 212 100 32.1% PIPEX, Public IP EXchange --- 05Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1089 608 481 44.2% AlterNet AS174 1308 928 380 29.1% NYSERNET-AS AS372 1183 848 335 28.3% NSN-AMES-AS AS1270 460 237 223 48.5% EUnet/DE AS19 709 538 171 24.1% CSS-DOMAIN AS560 577 410 167 28.9% NEARNET-EXT-AS AS1250 269 138 131 48.7% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 407 300 107 26.3% SURANET-AS-2 AS1849 319 215 104 32.6% PIPEX, Public IP EXchange

1 0

The Top 10
by Tony Bates 05 Aug '94

05 Aug '94

This is an auto-generated mail on Fri Aug 5 18:10:00 MET DST 1994 This is a list of the "Top 10" players who if CIDRizing at the AS level could make a significant gain in the size of Internet routing tables. This may be an over-estimation but it is hoped that this can act as an incentive for the "Top 10" and others to look at their CIDR capability. A full summary of all the ASes seen in the Internet can be seen by looking in: ftp.ripe.net:cidr/stats/AS* As stated above this is auto-generated so it is not checked before it leaves my workstation. Please also find a summary of the last weeks changes in terms of withdrawn and added routes. Please note that this is only a snapshot but does some indication of ASes participating in CIDR. More information can be found in: ftp.ripe.net:cidr/stats/Delta.* Top 10 Withdrawn Routes from 29Jul94 to 05Aug94 -127 AS1206 PSCNET-HS-AS -44 AS3609 CYBER-NET -42 AS1849 PIPEX, Public IP EXchange -37 AS1853 ACOnet Backbone -29 AS200 BARRNET-AS -24 AS760 University of Vienna, Austria -23 AS2917 oleANe, Groupe APYSOFT -17 AS1955 Computer and Automation Institute -16 AS210 WESTNET-WEST -15 AS1270 EUnet/DE Top 10 Added Routes from 29Jul94 to 05Aug94 115 AS3576 PREPNET-EAST 70 AS1329 NSFNETTEST34-AS 29 AS2907 SINET-AS 19 AS19 CSS-DOMAIN 15 AS97 JVNC-AS 14 AS701 AlterNet 12 AS204 PSCNET-AS 10 AS1239 SprintLink 9 AS271 BCNET-AS 7 AS1204 SUNYNET-ASN-AS Here follows the last weeks "Top 10" list with the corresponding date. --- 05Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1089 608 481 44.2% AlterNet AS174 1308 928 380 29.1% NYSERNET-AS AS372 1183 848 335 28.3% NSN-AMES-AS AS1270 460 237 223 48.5% EUnet/DE AS19 709 538 171 24.1% CSS-DOMAIN AS560 577 410 167 28.9% NEARNET-EXT-AS AS1250 269 138 131 48.7% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 407 300 107 26.3% SURANET-AS-2 AS1849 319 215 104 32.6% PIPEX, Public IP EXchange --- 04Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1085 603 482 44.4% AlterNet AS174 1304 927 377 28.9% NYSERNET-AS AS372 1185 845 340 28.7% NSN-AMES-AS AS1270 478 240 238 49.8% EUnet/DE AS19 707 537 170 24.0% CSS-DOMAIN AS560 575 408 167 29.0% NEARNET-EXT-AS AS1250 269 142 127 47.2% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 413 303 110 26.6% SURANET-AS-2 AS1849 317 213 104 32.8% PIPEX, Public IP EXchange --- 03Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1079 599 480 44.5% AlterNet AS174 1321 928 393 29.8% NYSERNET-AS AS372 1190 851 339 28.5% NSN-AMES-AS AS1270 474 238 236 49.8% EUnet/DE AS560 574 411 163 28.4% NEARNET-EXT-AS AS19 682 519 163 23.9% CSS-DOMAIN AS1250 269 132 137 50.9% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 412 303 109 26.5% SURANET-AS-2 AS97 360 262 98 27.2% JVNC-AS --- 02Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1076 599 477 44.3% AlterNet AS174 1321 929 392 29.7% NYSERNET-AS AS372 1180 848 332 28.1% NSN-AMES-AS AS1270 474 238 236 49.8% EUnet/DE AS19 705 536 169 24.0% CSS-DOMAIN AS560 576 409 167 29.0% NEARNET-EXT-AS AS1250 272 127 145 53.3% SINGAPORE-AS AS1849 338 218 120 35.5% PIPEX, Public IP EXchange AS279 399 296 103 25.8% SURANET-AS-2 AS1275 296 194 102 34.5% DFN-IP --- 01Aug94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1063 597 466 43.8% AlterNet AS174 1254 906 348 27.8% NYSERNET-AS AS372 1164 841 323 27.7% NSN-AMES-AS AS1270 474 238 236 49.8% EUnet/DE AS19 689 524 165 23.9% CSS-DOMAIN AS560 571 408 163 28.5% NEARNET-EXT-AS AS1849 362 227 135 37.3% PIPEX, Public IP EXchange AS1250 266 133 133 50.0% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 404 300 104 25.7% SURANET-AS-2 --- 31Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1072 596 476 44.4% AlterNet AS174 1268 913 355 28.0% NYSERNET-AS AS372 1283 942 341 26.6% NSN-AMES-AS AS1270 475 239 236 49.7% EUnet/DE AS568 742 516 226 30.5% SUMNET-AS AS560 570 408 162 28.4% NEARNET-EXT-AS AS200 500 363 137 27.4% BARRNET-AS AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS1250 244 130 114 46.7% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP --- 30Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1072 596 476 44.4% AlterNet AS174 1298 915 383 29.5% NYSERNET-AS AS372 1152 832 320 27.8% NSN-AMES-AS AS1270 475 239 236 49.7% EUnet/DE AS19 702 533 169 24.1% CSS-DOMAIN AS560 569 408 161 28.3% NEARNET-EXT-AS AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS1250 248 126 122 49.2% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 407 299 108 26.5% SURANET-AS-2 --- 29Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1075 599 476 44.3% AlterNet AS174 1301 919 382 29.4% NYSERNET-AS AS372 1190 861 329 27.6% NSN-AMES-AS AS1270 475 239 236 49.7% EUnet/DE AS560 574 411 163 28.4% NEARNET-EXT-AS AS19 690 527 163 23.6% CSS-DOMAIN AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS1250 257 131 126 49.0% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 408 301 107 26.2% SURANET-AS-2

1 0

FINAL draft of RIPE-81++
by Tony Bates 04 Aug '94

04 Aug '94

Find below the last iteration of ripe-81++. This has changes to the text and syntax for interas-in / interas-out following some comments to me from Merit. The ordering issues still exists but as stated before this will be decided by the working group chair. Please also note my earlier plea that we must agreement on this at the RIPE meeting if this is to be implemented in a timely manner and preferably before. Working group chairs please take note and see if you can't get this agreed within your groups before hand. Please note that the TOC will not be completed until the issued docment. versions online as usual from: ftp://ftp.ripe.net/ripe/drafts/ripe-81++.ps ftp://ftp.ripe.net/ripe/drafts/ripe-81++.txt --Tony. Representation of IP Routing Policies in a Routing Registry (ripe-81++) DRAFT DRAFT DRAFT Tony Bates Elise Gerich Laurent Joncheray Jean-Michel Jouanigot Daniel Karrenberg Marten Terpstra Jessica Yu Document-ID: ripe-1nn Obsoletes: ripe-81 July, 1994 ABSTRACT This document is an update to the original `ripe- 81'[1] proposal for representing and storing routing polices within the RIPE database. It incorporates several extensions proposed by Merit Inc.[2] and gives details of a generalised IP routing policy representa- tion to be used by all Internet routing registries. It acts as both tutorial and provides details of database objects and attributes that use and make up a routing registry. ripe-1nn.txt July, 1994 - 2 - Table of Contents 1 Introduction ................................................ ? 2 Organisation of this Document ............................... ? 3 General Representation of Policy Information ................ ? 4 The Routing Registry and the RIPE Database .................. ? 5 The Route Object ............................................ ? 6 The Autonomous System Object ................................ ? 7 The AS Macro Object ......................................... ? 8 The Community Object ........................................ ? 9 Representation of Routing Policies .......................... ? 10 Future Extensions .......................................... ? 11 References ................................................. ? 12 Authors Addresses .......................................... ? Appendix A - Syntax for the "aut-num" object .................. ? Appendix B - Syntax for the "community" object ................ ? Appendix C - Syntax for the "as-macro" object ................. ? Appendix D - Syntax for the "route" object .................... ? Appendix E - List of reserved words ........................... ? Appendix F - Motivations for RIPE-81++ ........................ ? Appendix G - Transition strategy from RIPE-81 to RIPE-81++ .... ? ripe-1nn.txt July, 1994 - 3 - 1. Introduction This document is a much revised version of the RIPE routing registry document known as ripe-81[1]. Since its inception in February, 1993 and the establishment of the RIPE routing registry, several addi- tions and clarifications have come to light which can be better presented in a single updated document rather than separate addenda. Some of the text remains the same the as the original ripe-81 docu- ment keeping its tutorial style mixed with details of the RIPE data- base objects relating to routing policy representation. However this document does not repeat the background and historical remarks in ripe-81. For these please refer to the original document. It should be noted that whilst this document specifically references the RIPE database and the RIPE routing registry one can easily read "Regional routing registry" in place of RIPE as this representation is certainly general and flexible enough to be used outside of the RIPE community incorporating many ideas and features from other routing registries in this update. As you can see this document has a new RIPE document identification number but can also be referred to as ripe-81++. Appendix F summar- ises the changes from ripe-81 plus the motivation for these changes. We would like to acknowledge many people for help with this docu- ment. Specifically, Peter Lothberg who was a co-author of the ori- ginal ripe-81 document for his many ideas and Gilles Farrache. We would also like to thank the RIPE routing working group for their review and comment. Finally, we like to thank Merit Inc. for many constructive comments and ideas and making the routing registry a worldwide Internet service. We would also like to acknowledge the funding provided by the PRIDE project run in conjunction with the RARE Technical Program, RIPE and the RIPE NCC without which this paper would not have been possible. 2. Organisation of this Paper This paper acts as both a basic tutorial for understanding routing policy and provides details of objects and attributes used within an Internet routing registry to store routing policies. Section 3 describes general issues about IP routing policies and their representation in routing registries. Experienced readers may wish to skip this section. Section 4 provides an overview of the RIPE database, its basic concepts, schema and objects which make up the database itself. It highlights the way in which the RIPE database splits routing information from allocation information. Sections 5, 6, 7 and 8 detail all the objects associated with routing policy representation. Section 9 gives a fairly extensive "walk through" of how these objects are used for expressing routing policy and the general principles behind their use. Section 10 provides a list of references used throughout this document. Appendix A, B, C and D document the formal syntax for the database objects and attributes. Appendix F details the main changes from ripe-81 and motivations for these changes. Appendix G tackles the issues of transition from ripe-1nn.txt July, 1994 - 4 - ripe-81 to ripe-81++. ripe-1nn.txt July, 1994 - 5 - 3. General Representation of Policy Information Networks, Network Operators and Autonomous Systems Throughout this document an effort is made to be consistent with terms so as not to confuse the reader. When we talk about "networks" we mean physical networks which have a unique classless IP network number: Layer 3 entities. We do not mean organisations. We call the organisations operating networks "network operators". For the sake of the examples we divide network operators into two categories: "service providers" and "customers". A "service pro- vider" is a network operator who operates a network to provide Internet services to different organisations, its "customers". The distinction between service providers and customers is not clear cut. A national research networking organisation frequently acts as a service provider to Universities and other academic organisations, but in most cases it buys international connectivity from another service provider. A University networking department is a customer of the research networking organisation but in turn may regard University departments as its customers. An Autonomous System (AS) is a group of IP networks having a single clearly defined routing policy which is run by one or more network operators. Inside ASes IP packets are routed using one or more Inte- rior Routing Protocols (IGPs). In most cases interior routing deci- sions are based on metrics derived from technical parameters like topology, link speeds and load(1). ASes exchange routing information with other ASes using Exterior Routing Protocols (EGPs). Exterior routing decisions are frequently based on policy based rules rather than purely on technical parame- ters. Tools are needed to configure complex policies and to commun- icate those policies between ASes while still ensuring proper opera- tion of the Internet as a whole. Some EGPs like BGP-3 [8] and BGP-4 [9] provide tools to filter routing information according to policy rules and more. None of them provides a mechanism to publish or com- municate the policies themselves. Yet this is critical for opera- tional coordination and fault isolation among network operators and thus for the operation of the global Internet as a whole. This document describes a "Routing Registry" providing this functional- ity. _________________________ (1) The entity we refer to as an AS is frequently and more generally called a routing domain with the AS just being an implementation vehicle. We have decided to use the term AS exclusively because it relates more direct- ly with the database objects and routing tools. By us- ing only one term we hope to reduce the number of con- cepts and to avoid confusion. The academically inclined reader may forgive us. ripe-1nn.txt July, 1994 - 6 - Routing Policies The exchange of routing information between ASes is subject to rout- ing policies. Consider the case of two ASes, X and Y exchanging routing information: NET1 ...... ASX <---> ASY ....... NET2 ASX knows how to reach a network called NET1. It does not matter whether NET1 is belonging to ASX or some other AS which exchanges routing information with ASX either directly or indirectly; we just assume that ASX knows how to direct packets towards NET1. Likewise ASY knows how to reach NET2. In order for traffic from NET2 to NET1 to flow between ASX and ASY, ASX has to announce NET1 to ASY using an external routing protocol. This states that ASX is willing to accept traffic directed to NET1 from ASY. Policy thus comes into play first in the decision of ASX to announce NET1 to ASY. In addition ASY has to accept this routing information and use it. It is ASY's privilege to either use or disregard the information that ASX is willing to accept traffic for NET1. ASY might decide not to use this information if it does not want to send traffic to NET1 at all or if it considers another route more appropriate to reach NET1. So in order for traffic in the direction of NET1 to flow between ASX and ASY, ASX must announce it to ASY and ASY must accept it from ASX: resulting packet flow towards NET1 <<=================================== | | announce NET1 | accept NET1 --------------> + -------------> | AS X | AS Y | <------------- + <-------------- accept NET2 | announce NET2 | | resulting packet flow towards NET2 ===================================>> Ideally, and seldom practically, the announcement and acceptance policies of ASX and ASY are identical. ripe-1nn.txt July, 1994 - 7 - In order for traffic towards NET2 to flow, announcement and accep- tance of NET2 must be in place the other way round. For almost all applications connectivity in just one direction is not useful at all. It is important to realise that with current destination based for- warding technology routing policies must eventually be expressed in these terms. It is relatively easy to formulate reasonable policies in very general terms which CANNOT be expressed in terms of announc- ing and accepting networks. With current technology such policies are almost always impossible to implement. Usually policies are not configured for each network separately but for groups of networks. In practise these groups are almost always defined by the networks forming one or more ASes. Routing Policy limitations The generic example of a reasonable but un-implementable routing is a split of already joined packet streams based on something other than destination address. Once traffic for the same destination network passes the same router, or the same AS at our level of abstraction, it will take exactly the same route to the destina- tion(2). In a concrete example AS Z might be connected to the outside world by two links. AS Z wishes to reserve these links for different kinds of traffic, let's call them black and white traffic. For this purpose the management of AS Z keeps two lists of ASes, the black and the white list. Together these lists comprise all ASes in the world reachable from AS Z. "W" <---> ... AS Z .... NET 3 <---> "B" It is quite possible to implement the policy for traffic originating in AS Z: AS Z will only accept announcements for networks in white ASes on the white link and will only accept announcements for net- works in black ASes on the black link. This causes traffic from networks within AS Z towards white ASes to use the white link and likewise traffic for black ASes to use the black link. Note that this way of implementing things makes it necessary to decide on the colour of each new AS which appears before traffic can be sent to it from AS Z. A way around this would be to accept only _________________________ (2) Disregarding special cases like "type of service" routing, load sharing and routing instabilities. ripe-1nn.txt July, 1994 - 8 - white announcements via the white link and to accept all but white announcements on the black link. That way traffic from new ASes would automatically be sent down the black link and AS Z management would only need to keep the list of white ASes rather than two lists. Now for the unimplementable part of the policy. This concerns traffic towards AS Z. Consider the following topology: B AS ---) "W" W AS ---) ---> B AS ---)>> AS A ---> ... AS Z .... NET 3 B AS ---) ---> W AS ---) "B" As seen from AS Z there are both black and white ASes "behind" AS A. Since ASes can make routing decisions based on destination only, AS A and all ASes between AS A and the two links connecting AS Z can only make the same decision for traffic directed at a network in AS Z, say NET 3. This means that traffic from both black and white ASes towards NET 3 will follow the same route once it passes through AS A. This will either be the black or the white route depending on the routing policies of AS A and all ASes between it and AS Z. The important thing to note is that unless routing and forwarding decisions can be made based on both source and destination addresses, policies like the "black and white" example cannot be implemented in general because "once joined means joined forever". Access Policies Access policies contrary to routing policies are not necessarily defined in terms of ASes. The very simplest type of access policy is to block packets from a specific network S from being forwarded to another network D. A common example is when some inappropriate use of resources on network D has been made from network S and the prob- lem has not been resolved yet. Other examples of access policies might be resources only accessible to networks belonging to a par- ticular disciplinary group or community of interest. While most of these policies are better implemented at the host or application level, network level access policies do exist and are a source of connectivity problems which are sometimes hard to diagnose. There- fore they should also be documented in the routing registry accord- ing to similar requirements as outlined above. Routing v Allocation information The RIPE database contains both routing registry and address space allocation registry information. In the past the database schema combined this information. Because RIPE was tasked with running both an allocation and routing registry it seemed natural to initially ripe-1nn.txt July, 1994 - 9 - combine these functions. However, experience has shown that a clear separation of routing information from allocation is desirable. Often the maintainer of the routing information is not the same as the maintainer of the allocation information. Also, in other parts of the world there are different registries for each kind of infor- mation. Whilst the actual routing policy objects will be introduced in the next section it is worthy of note that a transition from the current objects will be required. This is described with in Appendix G. This split in information represents a significant change in the representational model of the RIPE database. Appendix F expands on the reasons for this a little more. Tools The network operators will need a series of tools for policy rout- ing. Some tools are already available to perform some of the tasks. Most notably, the PRIDE tools [3] from the PRIDE project started in September 1993 as well as others produced by Merit Inc [4] and CERN [5]. These tools will enable them to use the routing policy stored in the RIPE routing registry to perform such tasks as check actual routing against policies defined, ensure consistency of policies set by dif- ferent operators, and simulate the effects of policy changes. Work continues on producing more useful tools to service the Inter- net community. ripe-1nn.txt July, 1994 - 10 - 4. The Routing Registry and the RIPE Database One of the activities of RIPE is to maintain a database of Euro- pean IP networks, DNS domains and their contact persons along with various other kinds of network management information. The database content is public and can be queried using the whois protocol as well as retrieved as a whole. This supports NICs/NOCs all over Europe and beyond to perform their respective tasks. The RIPE database combines both allocation registry and routing registry functions. The RIPE allocation registry contains data about address space allocated to specific enterprises and/or delegated to local registries as well as data about the domain name space. The allocation registry is described in separate documents [6,7] and outside the scope of this document. Database Objects Each object in the database describes a single entity in the real world. This basic principle means that information about that entity should only be represented in the corresponding data- base object and not be repeated in other objects. The whois ser- vice can automatically display referenced objects where appropriate. The types of objects stored in the RIPE database are summarised in the table below: R Object Describes References ____________________________________________________________________ B person contact persons A inetnum IP address space person A domain DNS domain person R aut-num autonomous system person (aut-num,community) R as-macro a group of autonomous systems person, aut-num R community community person R route a route being announced aut-num, community R clns CLNS address space and routing person The first column indicates whether the object is part of the alloca- tion registry (A), the routing registry (R) or both (B). The last column indicates the types of objects referenced by the particular type of object. It can be seen that almost all objects reference contact persons. Objects are described by attributes value pairs, one per line. Objects are separated by empty lines. An attribute that consists ripe-1nn.txt July, 1994 - 11 - of multiple lines should have the attribute name repeated on consecutive lines. The information stored about network 192.87.45.0 consists of three objects, one network object and two person objects and looks like this: inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE person: Daniel Karrenberg address: RIPE Network Coordination Centre (NCC) address: Kruislaan 409 address: NL-1098 SJ Amsterdam address: Netherlands phone: +31 20 592 5065 fax-no: +31 20 592 5090 e-mail: dfk(a)ripe.net nic-hdl: DK58 changed: ripe-dbm(a)ripe.net 920826 source: RIPE person: Marten Terpstra address: RIPE Network Coordination Centre (NCC) address: PRIDE Project address: Kruislaan 409 address: NL-1098 SJ Amsterdam address: Netherlands phone: +31 20 592 5064 fax-no: +31 20 592 5090 e-mail: Marten.Terpstra(a)ripe.net nic-hdl: MT2 notify: marten(a)ripe.net changed: marten(a)ripe.net 931230 source: RIPE Objects are stored and retrieved in this tag/value format. The RIPE NCC does not provide differently formatted reports because any desired format can easily be produced from this generic one. ripe-1nn.txt July, 1994 - 12 - Routing Registry Objects The main objects comprising the routing registry are "aut-num" and "route", describing an autonomous system and a route respectively. It should be noted that routes not described in the routing registry should never be routed in the Internet itself. The autonomous system (aut-num) object provides contact information for the AS and describes the routing policy of that AS. The routing policy is described by enumerating all neighbouring ASes with which routing information is exchanged. For each neighbour the routing policy is described in terms of exactly what is being sent (announced) and allowed in (accepted). It is important to note that this is exactly the part of the global policy over which an AS has direct control. Thus each aut-num object describes what can indeed be implemented and enforced locally by the AS concerned. Combined together all the aut-num objects provide the global routing graph and permit to deduce the exact routing policy between any two ASes. While the aut-num objects describe how routing information is pro- pagated, the route object describes a single route injected into the external routing mesh. The route object references the AS injecting (originating) the route and thereby indirectly provides contact information for the originating AS. This reference also provides the primary way of grouping routes into larger collections. This is necessary because describing routing policy on the level of single routes would be awkward to impractical given the number of routes in the Internet which is about 20,000 at the time of this writing. Thus routing policy is most often defined for groups of routes by originating AS. This method of grouping is well supported by current exterior routing protocols. The route object also refer- ences community objects described below to provide another method of grouping routes. Modification of aut-num object itself and the referencing by route objects is strictly protected to provide net- work operators control over the routing policy description and the routes originated by their ASes. Sometimes even keeping track of groups of routes at the AS level is cumbersome. Consider the case of policies described at the transit provider level which apply transitively to all customers of the transit provider. Therefore another level of grouping is provided by the as-macro object which provides groups of ASes which can be referenced in routing policies just like single ASes. Membership of as-macro groups is also strictly controlled. Sometimes there is a need to group routes on different criteria than ASes for purposes like statistics or local access policies. This is provided by the community object. A community object is much like an AS but without a routing policy. It just describes a group of routes. This is not supported at all by exterior routing protocols and depending on aggregation of routes may not be generally usable to define routing policies. It is suitable for local policies and non-routing related purposes. ripe-1nn.txt July, 1994 - 13 - These routing related objects will be described in detail in the sections below. ripe-1nn.txt July, 1994 - 14 - 5. The Route Object As stated in the previous chapter routing and address space alloca- tion information are now clearly separated. This is performed with the introduction of the route object. The route object will contain all the information regarding a routing announcement. All routing related attributes are removed from the inetnum object. Some old attributes are obsoleted: connect, routpr-l, bdryg-l, nsf- in, nsf-out, gateway). The currently useful routing attributes are moved to the route object: aut-sys becomes origin, ias-int will be encoded as part of the "to be proposed" `border-router' object and comm-list simply moves. See [6] for detail of the "inetnum" object definition. The information in the old inetnum object inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra connect: RIPE NSF WCW aut-sys: AS3333 comm-list: SURFNET ias-int: 192.87.45.80 AS1104 ias-int: 192.87.45.6 AS2122 ias-int: 192.87.45.254 AS2600 rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE will be distributed over two objects: ripe-1nn.txt July, 1994 - 15 - inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE route: 192.87.45.0/24 descr: RIPE Network Coordination Centre origin: AS3333 comm-list: SURFNET changed: dfk(a)ripe.net 940427 source: RIPE The route object is used to represent a single route originated into the Internet routing mesh. The actual syntax is given in Appendix D. However, there are several important aspects of the attributes worthy of note. The value of the route attribute will be a classless address. It represents the exact route being injected into the routing mesh. The representation of classless addresses is described in [10]. The value of the origin attribute will be an AS reference of the form AS1234 referring to an aut-num object. It represents the AS injecting this route into the routing mesh. The "aut-num" object (see below) thus referenced provides all the contact information for this route. Special cases: There can only be a single originating AS in each route object. However in todays Internet sometimes a route is injected by more than one AS. This situation is potentially dangerous as it can create conflicting routing policies for that route and requires coordination between the originating ASes. In the routing registry this is represented by multiple route objects. This is a departure from the one route (net), one AS principle of the ripe-81 routing registry. The consequences for the different tools based in the routing registry will need to be evaluated and possibly additional consistency checking of the database is needed. ripe-1nn.txt July, 1994 - 16 - The examples below will illustrate the usage of the route object further. Suppose three chunks of address space of 2 different enterprises represented by the following inetnum objects: Examples inetnum: 193.0.1.0 netname: ENT-1 descr: Enterprise 1 ... inetnum: 193.0.8.0 netname: ENT-2 descr: Enterprise 2 ... inetnum: 193.0.9.0 netname: ENT-2-SPEC descr: Enterprise 2 ... Supposing that the Enterprises have their own AS numbers straight application of routing without aggregation would yield: route: 193.0.1.0/24 descr: Enterprise 1 origin: AS1 ... route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 ... route: 193.0.9.0/24 descr: Enterprise 2 origin: AS2 ... NB: This representation can be achieved by straight translation from the ripe-81 representation. See Appendix G for more details. Homogeneous Aggregation The two chunks of address space of Enterprise 2 can be represented by one aggregate route turning two route objects into one and poten- tially saving routing table space for one route. ripe-1nn.txt July, 1994 - 17 - route: 193.0.8.0/23 descr: Enterprise 2 origin: AS2 ... Note that AS2 can also decide to originate all routes mentioned so far, two 24-bit prefixes and one 23-bit prefix. This case would be represented by storing all three route objects in the database. In this particular example the additional routes will not add any func- tionality however and only increase the amount of routes announced unnecessarily. Heterogeneous Aggregation Consider the following case however: route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 ... route: 193.0.9.0/24 descr: Enterprise 2 / Special origin: AS2 comm-list: SPECIAL ... Now the prefix 193.0.9.0/24 belongs to community SPECIAL (this com- munity may well not be relevant to routing) and the other prefix originated by AS2 does not. If AS2 aggregates these prefixes into the 193.0.8.0/23 prefix, routing policies based on the community value SPECIAL cannot be implemented in general, because there is no way to distinguish between the special and the not-so-special parts of AS2. If another AS has the policy to accept only routes to members of community SPECIAL it cannot implement it, because accept- ing the route to 193.0.8.0/23 would also route to 193.0.8.0/24 and not accepting this route would lose connectivity to the special part 193.0.9.0/24. We call aggregate routes consisting of components belonging to different communities or even different ASes "hetero- geneous aggregates". The problems introduced with heterogeneous aggregates are that once the homogeneous routes are withdrawn one cannot tell if a more specific part of the heterogeneous has a different policy. However, if can be counter argued that knowing this policy is of little use if you cannot implement a routing policy based on the less specific (and only route present) heterogeneous aggregate. In fact, this displays a facet of CIDR itself in that one may actually compromise slight variations on policy over announcing a larger (albeit ripe-1nn.txt July, 1994 - 18 - heterogeneous in terms of policy) aggregate to save address space. However, it is still useful to be able to document these variations in policy especially when this homogeneous more specific route is just being withdrawn. For this one can use the "withdrawn" attri- bute. The withdrawn attribute can serve to both indicate that a less specific aggregate is in fact heterogeneous and also allow the gen- eral documenting of route withdrawal. So there has to be a way for AS2 to document this even if it does not originate the route to 193.0.9.0/24 any more. This can be done with the "withdrawn" attribute of the route object. The aggregate route to 193.0.8.0/23 is now be registered as: route: 193.0.8.0/23 descr: Enterprise 2 origin: AS2 ... With the two homogeneous routes marked as withdrawn from the Inter- net routing mesh but still preserving their original routing infor- mation. route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 withdrawn: 940701 ... route: 193.0.9.0/24 descr: Enterprise 2 / Special origin: AS2 comm-list: SPECIAL withdrawn: 940701 ... It should be noted that the date value used in the withdrawn attri- bute can only be in the past. Proxy Aggregation The next step of aggregation are aggregates consisting of more than one AS. This generally means one AS is aggregating on behalf of another. It is called proxy aggregation. Proxy aggregation should be done with great care and always coordinates with other providers announcing the same route. Consider the following: ripe-1nn.txt July, 1994 - 19 - route: 193.0.0.0/20 descr: All routes known by AS1 in a single package origin: AS1 ... route: 193.0.1.0/24 descr: Foo origin: AS1 withdrawn: 940310 ... route: 193.0.8.0/24 descr: Bar origin: AS2 withdrawn: 940310 ... route: 193.0.9.0/24 descr: Bar-2 origin: AS2 withdrawn: 940310 comm-list: SPECIAL ... If AS1 announced no other routes to a single homed neighbouring AS, that neighbour can in general either take that route or leave it but not differentiate between AS1 and AS2. Note: If the neighbor was previously configured to accept routes originating in AS2 but not in AS1 they lose connectivity to AS2 as well. This means that proxy aggregation has to be done carefully and in a well coordinated fashion. The information in the withdrawn route object can help to achieve that. Aggregates with Holes If we assume that the world of our example still consists of only three chunks of address space the aggregate above contains what are called holes, parts of an aggregate that are not reachable via the originator of the route. From the routing information itself one cannot tell whether these are holes and what part of the route falls inside one. The only way to tell is to send a packet there and see ripe-1nn.txt July, 1994 - 20 - whether it gets to the destination, or an ICMP message is received back, or there is silence. On the other hand announcing aggregates with holes is quite legitimate. Consider a 16-bit aggregate with only one 24-bit prefix unreachable. The savings in routing table size by far outweigh the hole problem. For operational reasons however it is very useful to register these holes in the routing registry. Consider the case where a remote net- work operator experiences connectivity problems to addresses inside an aggregate route. If the packets are getting to the AS announcing the aggregate and there are no more specific routes, the normal cause of action is to get in touch with the originating AS of the aggregate route and ask them to fix the problem. If the address falls into a hole this is futile. Therefore problem diagnosis can be sped up and unnecessary calls prevented by registering the holes in the routing registry. We do this by using the "hole" attribute. In our example the representation would be: route: 193.0.0.0/20 descr: All routes known by AS1 origin: AS1 hole: 193.0.0.0/24 hole: 193.0.2.0/23 hole: 193.0.4.0/22 hole: 193.0.10.0/23 hole: 193.0.12.0/22 ... Note: there would also be two routes with the withdrawn attribute as displayed above (i.e. 193.0.8.0/24 and 193.0.9.0/24) Multiple Proxy Aggregation Finally suppose that AS2 decides to announce the same aggregate, they would add the following route object to the registry: route: 193.0.0.0/20 descr: All routes known by AS2 origin: AS2 hole: 193.0.0.0/24 hole: 193.0.2.0/23 hole: 193.0.4.0/22 hole: 193.0.10.0/23 hole: 193.0.12.0/22 ... As per the update procedures below both AS1 and AS2 will be notified that there already is a route to the same prefix in the registry. This multiple proxy aggregation is very dangerous to do if the sub- ripe-1nn.txt July, 1994 - 21 - aggregates of the route are not the same. It is still dangerous when the sub-aggregates are consistent but connectivity to the sub- aggregates varies widely between the originators. Route object update procedures Adding a route object will be have to be authorised by the guardian of the originating AS. The actual implementation of this is outside the scope of this document. This guarantees that an AS guardian has full control over the registration of the routes it announces. What is an Inter-AS network ? An inter-AS network(3) exists for the purpose of passing traffic and routing information between different autonomous systems. The most simple example of an inter-AS network is a point-to-point link, con- necting exactly two ASes. Each end of such a link is connected to an interface of router belonging to each of the autonomous systems. More complex examples are broadcast type networks with multiple interfaces connecting multiple ASes with the possibility of more than one connection per AS. Consider the following example of three routers 1, 2 and 3 with interfaces a through f connected by two inter-AS networks X and Y: X Y a1b --- c2d --- e3f Suppose that network X is registered in the routing registry as part of AS1 and net Y as part of AS3. If traffic passes from left to right prtraceroute will report the following sequence of interfaces and ASes: a in AS1 c in AS1 e in AS3 The traceroute algorithm enumerates only the receiving interfaces on the way to the destination. In the example this leads to the pas- sage of AS2 going unnoticed. This is confusing to the user and will also generate exceptions when the path found is checked against the routing registry. _________________________ (3) Inter-AS IP networks are those networks are currently called FIXes, IXFs, DMZs, NAPs, GIX and many other acronyms. ripe-1nn.txt July, 1994 - 22 - For operational monitoring tools such as prtraceroute it is neces- sary to know which interface on an inter-AS network belongs to which AS. If AS information is not known about interfaces on an inter-AS network, tools like prtraceroute cannot determine correctly which ASes are being traversed. All interfaces on inter-AS networks will are described in a separate object know as the `inet-rtr' object [15]. ripe-1nn.txt July, 1994 - 23 - 6. The Autonomous System Object Autonomous Systems An Autonomous System (AS) is a group of IP networks run by one or more network operators which has a single and clearly defined rout- ing policy. An AS has a unique number associated with it which is used both in exchange of exterior routing information and as an identifier of the AS itself. Exterior routing protocols such as BGP and EGP are used to exchange routing information between ASes. In routing terms an AS will normally use one or more interior gate- way protocols (IGPs) in conjunction with some sort of common agreed metrics when exchanging network information within its own AS. The term AS is often confused or even misused as a convenient way of grouping together a set of networks which belong under the same administrative umbrella even if within that group of networks there are various different routing policies. We provide the "community" concept for such use. ASes can strictly have only one single rout- ing policy. The creation of an AS should be done in a conscious and well coordi- nated manner to avoid creating ASes for the sake of it, perhaps resulting in the worst case scenario of one AS per routing announce- ment. It should be noted that there is a limited number of AS numbers available. Also creating an AS may well increase the number of AS paths modern EGPs will have to keep track of. This aggravates what is known as "the routing table growth problem". This may mean that by applying the general rules for the creation and allocation of an AS below, some re-engineering may well be needed. However, this may be the only way to actually implement the desired routing policy anyway. The creation and allocation of an AS should be done with the following recommendations in mind: o Creation of an AS is only required when exchanging routing information with other ASes. Some router implementations make use of an AS number as a form of tagging to identify the rout- ing process. However, it should be noted that this tag does not need to be unique unless routing information is indeed exchanged with other ASes. o For a simple case of customer networks connected to a single service provider, the IP network should normally be a member of the service providers AS. In terms of routing policy the IP network has exactly the same policy as the service provider and there is no need to make any distinction in routing informa- tion. This idea may at first seem slightly alien to some, but it highlights the clear distinction in the use of the AS number ripe-1nn.txt July, 1994 - 24 - as a representation of routing policy as opposed to some form of administrative use. o If a network operator connects to more than one AS with dif- ferent routing policies then they need to create their own AS. In the case of multi-homed customer networks connected to two service providers there are at least two different routing pol- icies to a given customer network. At this point the customer networks will be part of a single AS and this AS would be dis- tinct from either of the service providers ASes. This allows the customer the ability of having a different representation of policy and preference to the different service providers. This is the ONLY case where a network operator should create its own AS number. o As a general rule one should always try to populate the AS with as many routes as possible, providing all routes conform to the same routing policy. Each AS is represented in the RIPE database by both an AS object and the route objects representing the routes originated by the AS. The AS object stores descriptive, administrative and contact information about the AS as well as the routing policies of the AS in relation to all neighbouring ASes. The origin attributes of the route objects define the set of routes originated by the AS. Each route object can have exactly one origin attribute. Route objects can only be created and updated by the "guardian" of the AS and not by those immediately responsible for the particular routes referenced therein. This ensures that opera- tors, especially service providers, remain in control of AS routing announcements. The AS object itself is used to represent a description of adminis- trative details and the routing policies of the AS itself. The AS object definition is depicted as follows. ripe-1nn.txt July, 1994 - 25 - Example: aut-num: AS1104 descr: NIKHEF-H Autonomous system as-in: from AS1213 100 accept AS1213 as-in: from AS1913 100 accept AS1913 as-in: from AS1755 150 accept ANY as-out: to AS1213 announce ANY as-out: to AS1913 announce ANY as-out: to AS1755 announce AS1104 AS1913 AS1213 tech-c: Rob Blokzijl admin-c: Eric Wassenaar guardian: as-guardian(a)nikhef.nl changed: ripe-dbm(a)ripe.net 920910 source: RIPE See Appendix A for a complete syntax definition of the "aut-num" object. It should be noted that this representation provides two things: o a set of routes. o a description of administrative details and routing policies. The set of routes can be used to generate network list based confi- guration information as well as configuration information for exte- rior routing protocols knowing about ASes. This means an AS can be defined and is useful even if it does not use routing protocols which know about the AS concept. ripe-1nn.txt July, 1994 - 26 - Description of routing policies between ASs with multiple connec- tions - "interas-in/interas-out" Description of multiple connections between ASs defines how two ASs have chosen to set different policies for the use of each or some of the connections between the ASs. This description is necessary only if the ASs are connected in more than one way and the routing policy and differs at these two connections. Example: LINK1 193.0.1.1 +----------+ 193.0.1.2 | | AS1------AS2== ==AS3-----AS4 | | 193.0.1.5 +----------+ 193.0.1.6 LINK2 Note: LINK here denotes to connection points between ASs. It is not necessary just a serial link as it may be inter- preted. It could be ethernet or other type of connection as well. It may be that AS2 wants to use LINK2 only for traffic towards AS4. LINK1 is used for traffic to AS3 and as backup to AS4, should LINK2 fail. To implement this policy, one would use the attribute "interas-in" and "interas-out." This attribute permits ASs to describe their local decisions based on its preference such as multi-exit-discriminators (MEDs) and to communicate those routing decisions. This information would be useful in resolving problems when some traffic paths changed from traversing AS3's gateway in Timbuktu rather than the gateway in Mogadishu. The exact syntax is given in Appendix A. However, if we follow this example through in terms of AS2 we would represent this policy as follows: Example: aut-num: AS2 as-in: from AS3 10 accept AS3 AS4 as-out: to AS3 announce AS1 AS2 interas-in: from AS3 193.0.1.1/32 193.0.1.2/32 (pref=5) accept AS3 interas-in: from AS3 193.0.1.1/32 193.0.1.2/32 (pref=15) accept AS4 interas-in: from AS3 193.0.1.5/32 193.0.1.6/32 (pref=10) accept AS4 ... ripe-1nn.txt July, 1994 - 27 - Here we see additional policy information between two ASs in terms of the IP addresses of the connection. The parentheses and keyword are syntactic placeholders to add the readability of the attributes. If pref=MED is specified the preference indicated by the remote AS via the multi-exit- discriminator metric such as BGP is used. Of course this type on inter-AS policy should always be bilaterally agreed upon to avoid asymmetry and in practice there may need to be corresponding interas-in attributes in the policy representation of AS3. The interas-out attribute is similar in the same way to interas-in as as-out to as-in. The one major difference being that interas-out allows to associate an outgoing metric with each route. It is impor- tant to note that this metric is just passed to the peer AS and it is at the peer AS's discretion to use or ignore it. A special value of IGP specifies that the metric passed to the receiving AS will be derived from the IGP of the sending AS. In this way the peer AS can choose the optimal link for its traffic as determined by the sending AS. When both as-in,as-out and interas-in,interas-out are used, for the routes mentioned in both set of attributes, the preference defined in interas-in and interas-out will take precedence for the particu- lar interas connection point identified by <local-rid> and <remote- rid>. For the routes which are not mentioned in interas-in and interas-out, their preference will be using what defined in as-in. If a route is only referenced in some interas-in/out attributes and not in others it is assumed not announced/accepted on the con- nection concerned. The key difference between interas-in/interas-out and as-in/as-in attributes is the former describes a more specific inter-AS policy based on multiple connections between ASs and the latter the general inter-AS policy. The general policy should always be defined. The more specific inter-AS policy should only be defined when such a policy really exists and the implications of setting such poli- cies are fully understood. ripe-1nn.txt July, 1994 - 28 - How to describe the exclusion policy of a certain AS - "as-exclude" Some ASes have a routing policy based on the exclusion of certain routes if for whatever reason a certain AS is used as transit. Whilst, this is in general not good practice as it makes implicit assumptions on topology with asymmetry a possible outcome if not coordinated, this case needs to be accommodated within the routing policy representation. The way this is achieved is by making use of the "as-exclude" attri- bute. The precise syntax of this attribute can be found in Appendix A along with the rest of the defined syntax for the "aut-num" object. However, some explanation of the use of this attribute is useful. If we have the following example topology. Example: AS4--------AS3 | | | | | | AS1--------AS2--------AS5 With a simple corresponding policy like so: Example: aut-num: AS1 as-in: from AS2 100 accept ANY as-out: to AS2 announce AS1 as-exclude: exclude AS4 to ANY .... We see an interesting policy. What this says in simple terms is AS1 doesn't want to reach anything if it transit AS4. This can be a per- fectly valid policy. However, it should be realised that for what- ever reason AS2 decides to route to AS3 via AS4 then immediately AS1 has no connectivity to AS3 or if AS1 is running default to AS2 pack- ets from AS1 will still flow via AS4. The important point about this is that whilst AS1 can advise its neighbours of its policy it has no direct control on how it can enforce this policy to neighbours upstream. Another interesting scenario to highlight the unexpected result of using such an "as-exclude" policy. If we assume in the above example AS2 preferred AS4 to reach AS3 and AS1 did not use default routing then as stated AS1 would have no connectivity to AS3. Now lets sup- pose that for example the link between AS2 and AS4 went down for some reason. Like so: ripe-1nn.txt July, 1994 - 29 - Example: AS4--------AS3 | | AS1--------AS2--------AS5 Suddenly AS1 now has connectivity to AS3. This unexpected behavior should be considered when created policies based on the "as-exclude" attribute. The second problem with this type of policy is the potential of asymmetry. In the original example we saw the correct policy from AS1's point of view but if ASes with connectivity through AS4 do not use a similar policy you have asymmetric traffic and policy. If an AS uses such a policy they must be aware of the consequences of its use. Namely that the specified routes which transit the AS (i.e. routing announcements with this AS in the AS path information) in question will be excluded. If not coordinated this can easily cause asymmetry or even worse loss of connectivity to unknown ASes behind (or in front for that matter) the transit AS in question. With this in mind this attribute can only be viewed as a form of advisory to other service providers. However, this does not preclude its use with policy based tools if the attribute exists. By having the ability to specify a route keyword based on any of the four notations given in the syntax it allows the receiving AS to specify what routes it wishes to exclude through a given transit AS to a network granularity. ripe-1nn.txt July, 1994 - 30 - 7. AS Macros It may be difficult to keep track of each and every new AS that is represented in the routing registry. A convenient way around this is to define an `AS Macro' which essentially is a convenient way to group ASes. This is done so that each and every AS guardian does not have to add a new AS to it's routing policy as described by the as- in and as-out attributes of it's AS object. However, it should be noted that this creates an implicit trust on the guardian of the AS-Macro. An AS-Macro can be used in <routing policy expressions> for the "as-in" and "as-out" attributes in the aut-num object. The AS-Macro object is then used to derive the list or group of ASes. A simple example would be something like: Example: aut-num: AS786 as-in: from AS1755 100 accept AS-EBONE AND NOT AS1104 as-in: from AS1755 100 accept AS-EBONE AND NOT AS1104 as-out to AS1755 announce AS786 ..... Where the as-macro object for AS-EBONE is as follows: as-macro: AS-EBONE descr: ASes routed by EBONE as-list: AS2121 AS1104 AS2600 AS2122 as-list: AS1103 AS1755 AS2043 guardian: guardian(a)ebone.net ...... So the policy would be evaluated to: aut-num: AS786 as-in: from AS1755 100 accept (AS2121 OR AS1104 OR AS2600 OR AS2122 as-in: from AS1755 100 accept AS1103 OR AS1755 OR AS2043) AND NOT AS1104 ...... It should be noted that the above examples incorporates the rule for line wrapping as defined in Appendix A for policy lines. See Appen- dix C for a definition on the AS-Macro syntax. ripe-1nn.txt July, 1994 - 31 - 8. The Community Object A community is a group of routes that cannot be represented by an AS or a group of ASes. It is in some circumstances useful to define a group of routes that have something in common. This could be a spe- cial access policy to a supercomputer centre, a group of routes used for a specific mission, or a disciplinary group that is scattered among several autonomous systems. Also these communities could be useful to group routes for the purpose of network statistics. Communities do not exchange routing information, since they do not represent an autonomous system. More specifically, communities do not define routing policies, but access or usage policies. However, they can de used as in conjunction with an ASes routing policy to define a set of routes the AS sets routing policy for. Communities should be defined in a strict manner, to avoid creating as many communities as there are routes, or even worse. Communities should be defined following the two rules below; o Communities must have a global meaning. Communities that have no global meaning, are used only in a local environment and should be avoided. o Communities must not be defined to express non-local policies. It should be avoided that a community is created because some other organisation forces a policy upon your organisation. Communities must only be defined to express a policy defined by your organisation. Community examples There are some clear examples of communities: BACKBONE - all customers of a given backbone service provider even though they can have various different routing policies and hence belong to different ASes. This would be extremely useful for statistics collection. HEPNET - the High Energy Physics community partly shares infrastructure with other organisations, and the institutes it consists of are scattered all over Europe, often being part of a non HEPNET autonomous system. To allow statistics, access or part of a routing policy , a community HEPNET, consisting of all routes that are part of HEPNET, conveniently groups all these routes. ripe-1nn.txt July, 1994 - 32 - NSFNET - the National Science Foundation Network imposes an acceptable use policy on routes that wish to make use of it. A community NSFNET could imply the set of routes that comply with this pol- icy. MULTI - a large multinational corporation that does not have its own internal infrastructure, but connects to the various parts of its organisations by using local service providers that connect them all together, may decide to define a community to restrict access to their networks, only by networks that are part of this community. This way a corporate network could be defined on shared infrastructure. Also, this community could be used by any of the service providers to do statistics for the whole of the corporation, for instance to do topology or bandwidth plan- ning. Similar to Autonomous systems, each community is represented in the RIPE database by both a community object and community tags on the route objects representing the routes belonging to the community. The community object stores descriptive, administrative and contact information about the community. The community tags on the route objects define the set of routes belonging to a community. A route can have multiple community tags. The community tags can only be created and updated by the "guardian" of the community and not by those directly responsible for the par- ticular network. This ensures that guardians remain in control of community membership. Here's an example of how this might be represented in terms of the community tags within the network object. We have an example where the route 192.16.199.0/24 has a single routing policy (i.e. that of AS 1104), but is part of several different communities of interest. We use the tag "comm-list" to represent the list of communities associated with this route. NIKHEF-H uses the service provider SURFNET (a service provider with customers with more than one rout- ing policy), is also part of the High Energy Physics community as well as having the ability to access the Supercomputer at CERN(4). _________________________ (4) The community `CERN-SUPER', is somewhat national, but is intended as an example of a possible use of an access policy constraint. ripe-1nn.txt July, 1994 - 33 - Example: route: 192.16.199.0/24 descr: Local Ethernet descr: NIKHEF section H origin: AS1104 comm-list: HEPNET CERN-SUPER SURFNET changed: ripe-dbm(a)ripe.net 920604 source: RIPE In the above examples some communities have been defined. The com- munity object itself will take the following format: Example: community: SURFNET descr: Dutch academic research network authority: SURFnet B.V. guardian: comm-guardian(a)surfnet.nl admin-c: Erik-Jan Bos tech-c: Erik-Jan Bos changed: ripe-dbm(a)ripe.net 920604 source: RIPE For a complete explanation of the syntax please refer to Appendix B. ripe-1nn.txt July, 1994 - 34 - 9. Representation of Routing Policies Routing policies of an AS are represented in the autonomous system object. Initially we show some examples, so the reader is familiar with the concept of how routing information is represented, used and derived. Refer to Appendix A, for the full syntax of the "aut-num" object. The topology of routing exchanges is represented by listing how routing information is exchanged with each neighbouring AS. This is done separately for both incoming and outgoing routing information. In order to provide backup and back door paths a relative cost is associated with incoming routing information. Example 1: AS1------AS2 This specifies a simple routing exchange of two presumably isolated ASes. Even if either of them has routing information about routes in ASes other than AS1 and AS2, none of that will be announced to the other. aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 aut-num: AS2 as-out: to AS1 announce AS2 as-in: from AS1 100 accept AS1 The number 100 in the in-bound specifications is a relative cost, which is used for backup and back door routes. The absolute value is of no significance. The relation between different values within the same AS object is. A lower value means a lower cost. This is cons- ciously similar to the cost based preference scheme used with DNS MX RRs. Example 2: Now suppose that AS2 is connected to one more AS, besides AS1, and let's call that AS3: AS1------AS2------AS3 ripe-1nn.txt July, 1994 - 35 - In this case there are two reasonable routing policies: a) AS2 just wants to exchange traffic with both AS1 and AS3 itself without passing traffic between AS1 and AS3. b) AS2 is willing to pass traffic between AS3 and AS1, thus acting as a transit AS Example 2a: In the first case AS1's representation in the routing registry will remain unchanged as will be the part of AS2's representation describing the routing exchange with AS1. A description of the addi- tional routing exchange with AS3 will be added to AS2's representa- tion: aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 aut-num: AS2 as-out: to AS1 announce AS2 as-in: from AS1 100 accept AS1 as-out: to AS3 announce AS2 as-in: from AS3 100 accept AS3 aut-num: AS3 as-out: to AS2 announce AS3 as-in: from AS2 100 accept AS2 Note that in this example, AS2 keeps full control over its resources. Even if AS3 and AS1 were to allow each others routes in from AS2, the routing information would not flow because AS2 is not announcing it(5). Example 2b: If contrary to the previous case, AS1 and AS3 are supposed to have connectivity to each other via AS2, all AS objects have to change: _________________________ (5) Of course AS1 and AS3 could just send traffic to each other to AS2 even without AS2 announcing the routes, hoping that AS2 will forward it correctly. Such questionable practices however are beyond the scope of this document. ripe-1nn.txt July, 1994 - 36 - aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 AS3 aut-num: AS2 as-out: to AS1 announce AS2 AS3 as-in: from AS1 100 accept AS1 as-out: to AS3 announce AS2 AS1 as-in: from AS3 100 accept AS3 aut-num: AS3 as-out: to AS2 announce AS3 as-in: from AS2 100 accept AS1 AS2 Note that the amount of routing information exchanged with a neigh- bour AS is defined in terms of routes belonging to ASes. In BGP terms this is the AS where the routing information originates and the originating AS information carried in BGP could be used to implement the desired policy. However, using BGP or the BGP AS-path information is not required to implement the policies thus speci- fied. Configurations based on route lists can easily be generated from the database. The AS path information, provided by BGP can then be used as an additional checking tool as desired. The specification understands one special expression and this can be expressed as a boolean expressions: ANY - means any routing information known. For output this means that all routes an AS knows about are announced. For input it means that anything is accepted from the neighbour AS. ripe-1nn.txt July, 1994 - 37 - Example 3: AS4 is a stub customer AS, which only talks to service provider AS123. | | -----AS123------AS4 | | aut-num: AS4 as-out: to AS123 announce AS4 as-in: from AS123 100 accept ANY aut-num: AS123 as-in: from AS4 100 accept AS4 as-out: to AS4 announce ANY <further neighbours> Since AS4 has no other way to reach the outside world than AS123 it is not strictly necessary for AS123 to send routing information to AS4. AS4 can simply send all traffic for which it has no explicit routing information to AS123 by default. This strategy is called default routing. It is expressed in the routing registry by adding one or more default tags to the autonomous system which uses this strategy. In the example above this would look like: aut-num: AS4 as-out: to AS123 announce AS4 default: AS123 100 aut-num: AS123 as-in: from AS4 100 accept AS4 <further neighbours> ripe-1nn.txt July, 1994 - 38 - Example 4: AS4 now connects to a different operator, AS5. AS5 uses AS123 for outside connectivity but has itself no direct connection to AS123. AS5 traffic to and from AS123 thus has to pass AS4. AS4 agrees to act as a transit AS for this traffic. | | -----AS123------AS4-------AS5 | | aut-num: AS4 as-out: to AS123 announce AS4 AS5 as-in: from AS123 100 accept ANY as-out: to AS5 announce ANY as-in: from AS5 50 accept AS5 aut-num: AS5 as-in: from AS4 100 accept ANY as-out: to AS4 announce AS5 aut-num: AS123 as-in: from AS4 100 accept AS4 AS5 as-out: to AS4 announce ANY <further neighbours> Now AS4 has two sources of external routing information. AS5 which provides only information about its own routes and AS123 which pro- vides information about the external world. Note that AS4 accepts information about AS5 from both AS123 and AS5 although AS5 informa- tion cannot come from AS123 since AS5 is connected only via AS4 itself. The lower cost of 50 for the announcement from AS5 itself compared to 100 from AS123 ensures that AS5 is still believed even in case AS123 will unexpectedly announce AS5. In this example too, default routing can be used by AS5 much like in the previous example. AS4 can also use default routing towards AS123: ripe-1nn.txt July, 1994 - 39 - aut-num: AS4 as-out: to AS123 announce AS4 AS5 default: AS123 11 as-in: from AS5 50 accept AS5 Note no announcements to AS5, they default to us. aut-num: AS5 as-out: to AS4 announce AS5 default: AS4 100 aut-num: AS123 as-in: from AS4 100 announce AS4 AS5 <further neighbours> Note that the relative cost associated with default routing is totally separate from the relative cost associated with in-bound announcements. The default route will never be taken if an explicit route is known to the destination. Thus an explicit route can never have a higher cost than the default route. The relative cost asso- ciated with the default route is only useful in those cases where one wants to configure multiple default routes for redundancy. Note also that in this example the configuration using default routes has a subtly different behavior than the one with explicit routes: In case the AS4-AS5 link fails AS4 will send traffic to AS5 to AS123 when using the default configuration. Normally this makes not much difference as there will be no answer and thus little traffic. With certain datagram applications which do not require acknowledgments however, significant amounts of traffic may be use- lessly directed at AS123. Similarly default routing should not be used if there are stringent security policies which proscribe any traffic intended for AS5 to ever touch AS123. Generally it can be said that default routing should only be used in very simple topologies. Once the situation gets more complex using default routes can lead to unexpected results or even defeat the routing policies established when links fail. As an example consider how Example 5a) below could be implemented using default routing. ripe-1nn.txt July, 1994 - 40 - Example 5: In a different example AS4 has a private connection to AS6 which in turn is connected to the service provider AS123: | | -----AS123------AS4 | | | | | | AS6 ---------+ There are a number of policies worth examining in this case: a) AS4 and AS6 wish to exchange traffic between themselves exclusively via the private link between themselves; such traffic should never pass through the backbone (AS123). The link should never be used for transit traffic, i.e. traffic not both originating in and destined for AS4 and AS6. b) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. The link should never be used for transit traffic. c) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. Should the connection between AS4 and AS123 fail, traffic from AS4 to des- tinations behind AS123 can pass through the private link and AS6's connection to AS123. d) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. Should the backbone connection of either AS4 or AS6 fail, the traffic of the disconnected AS should flow via the other AS's backbone connection. ripe-1nn.txt July, 1994 - 41 - Example 5a: aut-num: AS4 as-in: from AS123 100 accept NOT AS6 as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-out: to AS6 announce AS4 aut-num: AS123 as-in: from AS4 100 accept AS4 as-out: to AS4 announce ANY as-in: from AS6 100 accept AS6 as-out: to AS6 announce ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept NOT AS4 as-out: to AS123 announce AS6 as-in: from AS4 50 accept AS4 as-out: to AS4 announce AS6 Note that here the configuration is slightly inconsistent. AS123 will announce AS6 to AS4 and AS4 to AS6. These announcements will be filtered out on the receiving end. This will implement the desired policy. Consistency checking tools might flag these cases however. ripe-1nn.txt July, 1994 - 42 - Example 5b: aut-num: AS4 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-out: AS6 AS4 aut-num: AS123 as-in: AS4 100 AS4 as-out: AS4 ANY as-in: AS6 100 AS6 as-out: AS6 ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS6 as-in: from AS4 50 accept AS4 as-out: to AS4 announce AS6 The thing to note here is that in the ideal operational case, `all links working' AS4 will receive announcements for AS6 from both AS123 and AS6 itself. In this case the announcement from AS6 will be preferred because of its lower cost and thus the private link will be used as desired. AS6 is configured as a mirror image. ripe-1nn.txt July, 1994 - 43 - Example 5c: The new feature here is that should the connection between AS4 and AS123 fail, traffic from AS4 to destinations behind AS123 can pass through the private link and AS6's connection to AS123. aut-num: AS4 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-in: from AS6 110 accept ANY as-out: to AS6 AS4 aut-num: AS123 as-in: from AS4 1 accept AS4 as-out: to AS4 announce ANY as-in: from AS6 1 accept AS6 as-in: from AS6 2 accept AS4 as-out: to AS6 announce ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept ANY as-out: to AS123 AS6 announce AS4 as-in: from AS4 50 accept AS4 as-out: to AS4 announce ANY Note that it is important to make sure to propagate routing informa- tion for both directions in backup situations like this. Connec- tivity in just one direction is not useful at all for almost all applications. Note also that in case the AS6-AS123 connection breaks, AS6 will only be able to talk to AS4. The symmetrical case (5d) is left as an exercise to the reader. 10. Future Extensions We envision that over time the requirements for describing routing policy will evolve. The routing protocols will evolve to support the requirements and the routing policy description syntax will need to evolve as well. For that purpose, a separate document will describe experimental syntax definitions for policy description. This docu- ment will be updated when new objects or attributes are proposed or modified. Two new attributes of the AS object which are proposed and supported by the Merit Routing Registry are as-transit and db-selector. as-transit describes the transit preferences of an AS. It allows an AS to describe its path preference in order to reach certain ripe-1nn.txt July, 1994 - 44 - destinations. The AS(s) specified in the path preference may or may not be an immediate neighbor of the AS defined in the AS object. as-transit accommodates policy decisions involving AS path whereas as-in and as-out do not. It is not unusual for ASs to have routing policies which involve path selection based on AS. Emerging proto- cols like SDRP [13] will allow an AS to choose a path independent of a neighboring ASs path choice. as-transit permits descriptions based on AS path selection. The DataBase Selector (db-selector) function allows one to take advantage of information registered in other Registries. It permits the selection of networks in a database based on their attributes. It is proposed to be used within the as-in/as-out attribute family to make the description of policy concise. For example, if an AS has the policy of not accepting any routes from country XYZ, the AS can use the db-selector to check a database which has a network and country attribute and relate that information to the information in the routing registry. The advantage of referencing another database is that the routing registry will avoid duplicating the information maintained in other information registries. Detailed examples and syntax are described in document ???? [14]. ripe-1nn.txt July, 1994 - 45 - 11. References [1] Bates, T., Jouanigot, J-M., Karrenberg, D., Lothberg, P., Terpstra, M., "Representation of IP Routing Policies in the RIPE Database", RIPE-81, February 1993. [2] Merit Network Inc.,"Representation of Complex Routing Policies of an Autonomous System", DRAFT, March, 1994. [3] PRIDE Tools Release 1. See ftp.ripe.net:pride/tools/pride-tools-1.tar.Z. [4] Merit Inc. RRDB Tools. See rrdb.merit.edu:pub/meritrr/* [5] The Network List Compiler. See dxcoms.cern.ch:pub/ripe-routing-wg/nlc-2.2d.tar [6] Lord, A., Terpstra, M., "RIPE Database Template for Networks and Persons", DRAFT, May 1994. [7] Karrenberg, D., "RIPE Database Template for Domains", RIPE-49, April 1992. [8] Lougheed, K., Rekhter, Y., "A Border Gateway Protocol 3 (BGP- 3)", RFC1267, October 1991. [9] Rekhter, Y., Li, T., "A Border Gateway Protocol 4 (BGP-4)", RFC-1654, May 1994. [10] Bates, T., Karrenberg, D., Terpstra, M., "Support for Classless Internet Addresses in the RIPE Database", DRAFT, May 1994. [11] Karrenberg, D., "Authorisation and Notification of Changes in the RIPE Database", RIPE-96, October 1993. [12] Bates, T., "Support of Guarded fields within the RIPE Data- base", ripe-108, February 1994. [13] Estrin, D., Li, T., Rekhter, Y., Varadhan, K., "Source Demand Routing: Packet Format and Forwarding Specification (Version 1)", INTERNET-DRAFT, draft-ietf-sdr-sdrp-04.txt, March 1994. [14] ?????, "Experimental Objects and attributes for the Routing Registry, ???, ????. [15] Bates, T., "Specifying an `Internet Router' in the Routing Registry", DRAFT, July 1994. ripe-1nn.txt July, 1994 - 46 - 12. Author's Addresses Tony Bates RARE/PRIDE Project c/o RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5064 T.Bates(a)ripe.net Elise Gerich The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2120 epg(a)merit.edu Laurent Joncheray The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2065 lpj(a)merit.edu Jean-Michel Jouanigot CERN, European Laboratory for Particle Physics CH-1211 Geneva 23 Switzerland +41 22 767 4417 Jean-Michel.Jouanigot(a)cern.ch Daniel Karrenberg RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5065 D.Karrenberg(a)ripe.net ripe-1nn.txt July, 1994 - 47 - Marten Terpstra PRIDE Project c/o RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5064 M.Terpstra(a)ripe.net Jessica Yu The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2655 jyy(a)merit.edu ripe-1nn.txt July, 1994 - 48 - Appendix A - Syntax for the aut-num object. Here is a summary of the tags associated with aut-num object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the aut-num object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. aut-num: [mandatory] [single] descr: [mandatory] [multiple] as-in: [optional] [multiple] as-out: [optional] [multiple] interas-in: [optional] [multiple] interas-out: [optional] [multiple] as-exclude: [optional] [multiple] default: [optional] [multiple] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] guardian: [mandatory] [single] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: aut-num: The autonomous system number. This must be a uniquely allo- cated autonomous system number from an AS registry (i.e. the RIPE NCC, the Inter-NIC, etc). Format: AS<positive integer between 1 and 65535> Example: aut-num: AS1104 Status: mandatory, only one line allowed descr: A short description of the Autonomous System. Format: free text Status: mandatory, multiple lines allowed as-in: ripe-1nn.txt July, 1994 - 49 - Example: descr: NIKHEF section H descr: Science Park Watergraafsmeer descr: Amsterdam A description of accepted routing information between AS peers. Format: from <aut-num> <cost> accept <routing policy expression> The keywords from and accept are optional and can be omit- ted. <aut-num> refers to your AS neighbour. <cost> is a positive integer used to express a relative cost of routes learned. The lower the cost the more pre- ferred the route. <routing policy expression> can take the following for- mats. 1. A list of one or more ASes, AS Macros, Communities or Network Lists. A Network List is a list of network numbers in prefix length format, separated by commas, and surrounded by curly brackets. Examples: as-in: from AS1103 100 accept AS1103 as-in: from AS786 105 accept AS1103 as-in: from AS786 10 accept AS786 HEPNET as-in: from AS1755 110 accept AS1103 AS786 as-in: from AS3333 100 accept {192.87.45.0/16, 128.141.0.0/16} 2. A set of KEYWORDS. The following KEYWORD is currently defined: ANY this means anything the neighbour AS knows. 3. A logical expression of either 1 or 2 above The current logical operators are defined as: AND OR NOT ripe-1nn.txt July, 1994 - 50 - NOTE: if no logical operator is given between ASes, AS-macros, Communities, Network Lists and KEYWORDS it is implicitly evaluated as an `OR' operation. The OR can be left out for conciseness. Rules are grouped together using parenthesis i.e "(" and ")". Example: as-in: from AS1755 100 accept ANY AND NOT (AS1234 OR AS513) as-in: from AS1755 150 accept AS1234 OR {35.0.0.0/8} A rule can be wrapped over lines providing the associated <aut-num>, <cost> values and from and accept keywords are repeated and occur on con- secutive lines. Example: as-in: from AS1755 100 accept ANY AND NOT (AS1234 AS513) and as-in: from AS1755 100 accept ANY AND NOT ( as-in: from AS1755 100 accept AS1234 AS513) are evaluated to the same result. Please note that the ordering of these continuing lines matters. Status: optional, multiple lines allowed as-out: A description of generated routing information sent to other AS peers. Format: to <aut-num> announce <routing policy expression The to and announce keywords are optional and can be omit- ted. <aut-num> refers to your AS neighbour. <routing policy expression> is explained in the as-in attribute definition above. Example: as-out: to AS1104 announce AS978 as-out: to AS1755 announce ANY as-out: to AS786 announce ANY AND NOT (AS978) Status: optional, multiple lines allowed ripe-1nn.txt July, 1994 - 51 - interas-in: Describes incoming local preferences on an inter AS connection. Format: from <aut-num> [<local-rid>] [<neighbor-rid>] <preference> accept <routing policy expression> The keywords from and accept are optional and can be omit- ted. <aut-num> is an autonomous system as defined in as-in. <local-rid> contains the IP address of the border router in the AS describing the policy. IP address must be in prefix length format. This field is optional. <neighbor-rid> contains the IP address of neighbor AS's border router from which this AS accept routes defined in the <routing policy expression>. IP addresses must be in prefix length format. This field is optional. <local-info> contains the IP address of the local border router, followed by a space, followed by the IP address of the remote border router. IP addresses must be in prefix length format. <preference> is defined as follows: (<pref-type>=<value>) It should be noted the parenthesis ``('' and ``)'' and the ``<pref-type>'' keyword must be present for this prefer- ence to be valid. <pref-type> currently only supports "pref". It could be expanded to other type of preference such as tos/qos as routing technology matures. <value> can take one of the following values: <cost> <cost> is a positive integer used to express a rela- tive cost of routes learned. The lower the cost the more preferred the route. This <cost> value is only relevant to other interas-in attributes, not to as-in attributes. MED This indicates the AS will use the MED metric, as implemented in BGP, sent from its neighbor AS. NOTE: Combinations of MED and <cost> should be avoided for the same destinations. ripe-1nn.txt July, 1994 - 52 - CAVEAT: The pref-type values may well be enhanced in the future as more inter-ASs routing protocols intro- duce other metrics. <routing policy expression> is an expression as defined in as-in above. Examples: interas-in: from AS1104 192.87.45.254/32 192.87.45.80/32 (pref=10) accept AS786 AS987 interas-in: from AS1104 192.87.45.254/32 192.87.45.79/32 (pref=20) accept AS987 interas-in: from AS1103 192.87.45.254/32 192.87.45.32/32 (pref=MED) accept ANY Status: optional, multiple lines allowed interas-out: Format: to <aut-num> [<local-rid>] [<neighbor-rid>] announce [<metric>] <routing policy expression> The keywords to and announce are optional and can be omit- ted. The definitions of <aut-num>, <local-rid> <neighbor-rid>, and <routing policy expression> are identical to those defined in interas-in. <metric> is defined as follows: (<metric-type>=<value>) It should be noted the parenthesis ``('' and ``)'' and the keywords of ``<metric-type>'' must be present for this metric to be valid. <metric-type> currently only supports "metric-out". It could be expanded to other type of preference such as tos/qos as routing technology matures. <value> can take one of the following values: <num-metric> <num-metric> is a pre-configured metric for outbound routes. The lower the cost the more preferred the route. This <num-metric> value is only relevant to other interas-out attributes, not to as-out attri- butes. IGP This indicates that this means that the metric reflects the ASs internal topology cost. The topology is reflected here by using MED which is derived from the AS's IGP metric. ripe-1nn.txt July, 1994 - 53 - NOTE: Combinations of IGP and <num-metric> should be avoided for the same destinations. CAVEAT: The metric-out values may well be enhanced in the future as more interas protocols make use of metrics. Examples: interas-out: to AS1104 192.87.45.254/32 192.87.45.80/32 (metric-out=10) announce AS23 AS10 interas-out: to AS1104 192.87.45.80/32 (metric-out=15) announce AS10 interas-out: to AS1103 192.87.45.254/32 (metric-out=IGP) announce ANY Status: optional, multiple lines allowed as-exclude: A list of transit ASes to ignore all routes from. Format: exclude <aut-num> to <exclude-route-keyword> Keywords exclude and to are optional and can again be omitted. <aut-num> refers to the transit AS in question. an <exclude-route-keyword> can be ONE of the following. 1. <aut-num> 2. AS macro 3. Community 4. ANY Examples: as-exclude: exclude AS690 to HEPNET This means exclude any HEPNET routes which have a route via AS690. as-exclude: exclude AS1800 to AS-EUNET This means exclude any AS-EUNET routes which have a route via AS1800. as-exclude: exclude AS1755 to AS1104 This means exclude any AS1104 route which have a route via AS1755. ripe-1nn.txt July, 1994 - 54 - as-exclude: exclude AS1104 to ANY This means exclude all routes which have a route via AS1104. Status: optional, multiple lines allowed default: An indication of how default routing is done. Format: <aut-num> <relative cost> <default-expression> where <aut-num> is the AS peer you will default route to, and <relative cost> is the relative cost is a positive integer used to express a preference for default. There is no relationship to the cost used in the as-in tag. The AS peer with the lowest cost is used for default over ones with higher costs. <default-expression> is optional and provides information on how a default route is selected. It can take the fol- lowing formats: 1. static. This indicates that a default is statically configured to this AS peer. 2. A network list with the syntax as described in the as-in attribute. This indicates that this list of routes is used to generate a default route. A special but valid value in this is the special route used by some routing protocols to indicate default: 0.0.0.0/0 3. default. This is the same as {0.0.0.0/0}. This means that the routing protocol between these two peers generates a true default. Examples: default: AS1755 10 default: AS786 5 {140.222.0.0/16, 192.87.45.0/24} default: AS2043 15 default Status: optional, multiple lines allowed tech-c: Full name or uniquely assigned NIC-handle of a technical con- tact person. This is someone to be contacted for technical problems such as misconfiguration. Format: <firstname> <initials> <lastname> or <nic-handle> ripe-1nn.txt July, 1994 - 55 - Example: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Example: admin-c: Joe T Bloggs admin-c: JTB1 Status: mandatory, multiple lines allowed guardian: Mailbox of the guardian of the Autonomous system. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: as1104-guardian(a)nikhef.nl Status: mandatory, only one line and e-mail address allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Multihomed AS talking to AS1755 and AS786 remarks: Will soon connect to AS1104 also. Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be sent. See also [11]. ripe-1nn.txt July, 1994 - 56 - Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 57 - Appendix B - Syntax details for the community object. Here is a summary of the tags associated with community object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the commun- ity object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. community: [mandatory] [single] descr: [mandatory] [multiple] authority: [mandatory] [single] guardian: [mandatory] [single] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: community: Name of the community. The name of the community should be descriptive of the community it describes. Format: Upper case text string which cannot start with "AS" or any of the <routing policy expression> KEYWORDS. See Appendix A. Example: community: WCW Status: mandatory, only one line allowed descr: A short description of the community represented. Format: free text Example: descr: Science Park Watergraafsmeer descr: Amsterdam Status: mandatory, multiple lines allowed ripe-1nn.txt July, 1994 - 58 - authority: The formal authority for this community. This could be an organisation, institute, committee, etc. Format: free text Example: authority: WCW LAN Committee Status: mandatory, only one line allowed guardian: Mailbox of the guardian of the community. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: wcw-guardian(a)nikhef.nl Status: mandatory, only one line and email address allowed tech-c: Full name or uniquely assigned NIC-handle of an technical con- tact person for this community. Format: <firstname> <initials> <lastname> or <nic-handle> Example: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Example: admin-c: Joe T Bloggs admin-c: JTB1 ripe-1nn.txt July, 1994 - 59 - Status: mandatory, multiple lines allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Temporary community remarks: Will be removed after split into ASes Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. ripe-1nn.txt July, 1994 - 60 - Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 61 - Appendix C - AS Macros syntax definition. Here is a summary of the tags associated with as-macro object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the as-macro object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. as-macro: [mandatory] [single] descr: [mandatory] [multiple] as-list: [mandatory] [multiple] guardian: [mandatory] [single] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: as-macro: The name of a macro containing at least two Autonomous Systems grouped together for ease of administration. Format: AS-<string> The <string> should be in upper case and not contain any special characters. Example: as-macro: AS-EBONE Status: mandatory, only one line allowed descr: A short description of the Autonomous System Macro. Format: free text Example: descr: Macro for EBONE connected ASes Status: mandatory, multiple lines allowed ripe-1nn.txt July, 1994 - 62 - as-list: The list of ASes that make up this macro. Format: <aut-num> <aut-num> ... See Appendix A for <aut-num> definition. Example: as-list: AS786 AS513 AS1104 Status: mandatory, multiple lines allowed guardian: Mailbox of the guardian of this AS macro. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: as-ebone-guardian(a)ebone.net Status: mandatory, only one line and e-mail address allowed tech-c: Full name or uniquely assigned NIC-handle of a technical con- tact person for this macro. This is someone to be contacted for technical problems such as misconfiguration. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: ripe-1nn.txt July, 1994 - 63 - admin-c: Joe T Bloggs admin-c: JTB1 Status: mandatory, multiple lines allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: AS321 will be removed from this Macro shortly Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD ripe-1nn.txt July, 1994 - 64 - <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 65 - Appendix D - Syntax for the "route" object. There is a summary of the tags associated with community object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the commun- ity object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. route: [mandatory] [single] descr: [mandatory] [multiple] origin: [mandatory] [single] hole: [optional] [multiple] withdrawn: [optional] [multiple] comm-list: [optional] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: route: Route being announced. Format: Classless representation of a route with the RIPE database known as the "prefix length" representation. See [10] for more details on classless representations. Examples: route: 192.87.45.0/24 This represents addressable bits 192.87.45.0 to 192.87.45.255. route: 192.1.128.0/17 This represents addressable bits 192.1.128.0 to 192.1.255.255. Status: mandatory, only one line allowed origin: The autonomous system announcing this route. Format: <aut-num> ripe-1nn.txt July, 1994 - 66 - See appendix A for <aut-num> syntax. Example: origin: AS1104 Status: mandatory, only one line allowed hole: Denote the parts of the address space covered this route object to which the originator does not provide connectivity. Format: Classless representation of a route with the RIPE database known as the "prefix length" representation. See [10] for more details on classless representations. It should be noted that is sub-aggregate must be a component of that registered in the route object. Example: hole: 193.0.4.0/24 Status: optional, multiple lines allowed withdrawn: Used to denote the day this route has been withdrawn from the Internet routing mesh. It should be noted that this date cannot be in the future. Format: YYMMDD YYMMDD denotes the date this route was withdrawn. Example: withdrawn: 940711 Status: optional, multiple lines allowed comm-list: List of one or more communities this route is part of. Format: <community> <community> ... See Appendix B for <community> definition. Example: comm-list: HEP LEP Status: optional, multiple lines allowed ripe-1nn.txt July, 1994 - 67 - remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Multihomed AS talking to AS1755 and AS786 remarks: Will soon connect to AS1104 also. Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: ripe-1nn.txt July, 1994 - 68 - changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 69 - Appendix E - List of reserved words The following list of words are reserved for use within the attri- butes of the AS object. The use of these words is solely for the purpose of clarity. All keywords must be lower case. accept announce exclude from to transit Examples of the usage of the reserved words are: as-in: from neighborAS accept route as-out: to neighborAS announce route as-exclude: exclude ASpath to destination as-transit: transit ASpath to destination default: from neighborAS accept route default: to neighborAS announce route Note: that as-transit is an experimental attribute. See section 10. ripe-1nn.txt July, 1994 - 70 - Appendix F - Motivations for RIPE-81++ This appendix gives motivations for the major changes in this propo- sal from ripe-81. (It is not complete yet). The main goals of the routing registry rework are: SPLIT Separate the allocation and routing registry functions into different database objects. This will facilitate data manage- ment if the Internet registry and routing registry functions are separated (like in other parts of the world). It will also make more clear what is part of the routing registry and who has authority to change allocation vs. routing data. CIDR Add the possibility to specify classless routes in the routing registry. Classless routes are being used in Internet produc- tion now. Aggregation information in the routing registry is necessary for network layer troubleshooting. It is also neces- sary because aggregation influences routing policies directly. CALLOC Add the possibility to allocate address space on classless boundaries in the allocation registry. This is a way to preserve address space. CLEAN To clean up some of the obsolete and unused parts of the rout- ing registry. The major changes are now discussed in turn: Introduce Classless Addresses CIDR, CALLOC Introduce route object. SPLIT, CIDR and CALLOC. Delete obsolete attributes from inetnum. CLEAN. ripe-1nn.txt July, 1994 - 71 - Delete RIPE-DB and LOCAL from routing policy expressions. CLEAN Allow multiple ASes to originate the same route Because it is being done. CIDR. Made possible by SPLIT. ripe-1nn.txt July, 1994 - 72 - Appendix G - Transition strategy from RIPE-81 to RIPE-81++ Transition from the routing registry described by ripe-81 to the routing registry described in this document is a straightforward process once the new registry functions have been implemented in the database software and are understood by the most commonly used registry tools. The routing related attributes in the classful inet- num objects of ripe-81 can be directly translated into new routing objects. Then these attributes can be deleted from the inetnum object making that object conform to the new schema. Proposed transition steps: 1) Implement classless addresses and new object definition in the database software. 2) Make common tools understand the new schema and prefer it if both old and new are present. 3) Invite everyone to convert their data to the new format. This can be encouraged by doing conversions automatically and pro- posing them to maintainers. 4) At a flag day remove all remaining routing information from the inetnum objects. Before the flag day all usage of obsoleted inetnum attributes has to cease and all other routing registry functions have to be taken over by the new objects and attri- butes. The current estimate is that point three can be reached in the Sum- mer 1994 if the draft is accepted by mid-June. The flag day should be scheduled 3-4 months after this point. ripe-1nn.txt July, 1994

1 0

The Top 10
by Tony Bates 29 Jul '94

29 Jul '94

This is an auto-generated mail on Fri Jul 29 18:10:00 MET DST 1994 This is a list of the "Top 10" players who if CIDRizing at the AS level could make a significant gain in the size of Internet routing tables. This may be an over-estimation but it is hoped that this can act as an incentive for the "Top 10" and others to look at their CIDR capability. A full summary of all the ASes seen in the Internet can be seen by looking in: ftp.ripe.net:cidr/stats/AS* As stated above this is auto-generated so it is not checked before it leaves my workstation. Please also find a summary of the last weeks changes in terms of withdrawn and added routes. Please note that this is only a snapshot but does some indication of ASes participating in CIDR. More information can be found in: ftp.ripe.net:cidr/stats/Delta.* Top 10 Withdrawn Routes from 22Jul94 to 29Jul94 -66 AS1329 NSFNETTEST34-AS -50 AS271 BCNET-AS -23 AS2907 SINET-AS -9 AS1759 The DataNet IP Service -8 AS114 SESQUINET-AS -7 AS2118 RELCOM-AS -6 AS2136 PCC-TECHNO-AS -5 AS97 JVNC-AS -4 AS286 EUnet Backbone AS -3 AS3113 DOC-ESA-ASN Top 10 Added Routes from 22Jul94 to 29Jul94 51 AS3609 CYBER-NET 29 AS1206 PSCNET-HS-AS 24 AS3576 PREPNET-EAST 23 AS174 NYSERNET-AS 21 AS701 AlterNet 20 AS372 NSN-AMES-AS 18 AS3560 GDSAS 17 AS542 ARNET 13 AS2044 WORLDNET-AS 9 AS2915 SPIN-NET Here follows the last weeks "Top 10" list with the corresponding date. --- 29Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1075 599 476 44.3% AlterNet AS174 1301 919 382 29.4% NYSERNET-AS AS372 1190 861 329 27.6% NSN-AMES-AS AS1270 475 239 236 49.7% EUnet/DE AS560 574 411 163 28.4% NEARNET-EXT-AS AS19 690 527 163 23.6% CSS-DOMAIN AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS1250 257 131 126 49.0% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 408 301 107 26.2% SURANET-AS-2 --- 28Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1057 600 457 43.2% AlterNet AS174 1273 904 369 29.0% NYSERNET-AS AS372 1202 864 338 28.1% NSN-AMES-AS AS1270 475 239 236 49.7% EUnet/DE AS19 685 521 164 23.9% CSS-DOMAIN AS560 572 411 161 28.1% NEARNET-EXT-AS AS1849 360 225 135 37.5% PIPEX, Public IP EXchange AS1250 259 137 122 47.1% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS97 347 249 98 28.2% JVNC-AS --- 27Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1056 597 459 43.5% AlterNet AS174 1293 907 386 29.9% NYSERNET-AS AS372 1154 834 320 27.7% NSN-AMES-AS AS1270 474 238 236 49.8% EUnet/DE AS19 666 507 159 23.9% CSS-DOMAIN AS560 557 408 149 26.8% NEARNET-EXT-AS AS1849 360 225 135 37.5% PIPEX, Public IP EXchange AS1250 264 140 124 47.0% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP AS279 408 303 105 25.7% SURANET-AS-2 --- 26Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1058 593 465 44.0% AlterNet AS174 1284 903 381 29.7% NYSERNET-AS AS372 1186 855 331 27.9% NSN-AMES-AS AS1270 469 234 235 50.1% EUnet/DE AS560 568 411 157 27.6% NEARNET-EXT-AS AS19 659 509 150 22.8% CSS-DOMAIN AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1250 252 140 112 44.4% SINGAPORE-AS AS1275 312 201 111 35.6% DFN-IP --- 25Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1058 595 463 43.8% AlterNet AS174 1245 880 365 29.3% NYSERNET-AS AS372 1186 858 328 27.7% NSN-AMES-AS AS1270 467 233 234 50.1% EUnet/DE AS560 577 414 163 28.2% NEARNET-EXT-AS AS19 686 529 157 22.9% CSS-DOMAIN AS1849 359 224 135 37.6% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 314 203 111 35.4% DFN-IP AS279 405 305 100 24.7% SURANET-AS-2 --- 24Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1057 595 462 43.7% AlterNet AS174 1272 903 369 29.0% NYSERNET-AS AS372 1153 841 312 27.1% NSN-AMES-AS AS1270 467 233 234 50.1% EUnet/DE AS560 577 415 162 28.1% NEARNET-EXT-AS AS19 692 531 161 23.3% CSS-DOMAIN AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 314 203 111 35.4% DFN-IP AS279 410 305 105 25.6% SURANET-AS-2 --- 23Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1057 595 462 43.7% AlterNet AS174 1272 903 369 29.0% NYSERNET-AS AS372 1153 841 312 27.1% NSN-AMES-AS AS1270 467 233 234 50.1% EUnet/DE AS560 577 415 162 28.1% NEARNET-EXT-AS AS19 692 531 161 23.3% CSS-DOMAIN AS1849 361 226 135 37.4% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 314 203 111 35.4% DFN-IP AS279 410 305 105 25.6% SURANET-AS-2 --- 22Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1054 588 466 44.2% AlterNet AS174 1278 901 377 29.5% NYSERNET-AS AS372 1170 846 324 27.7% NSN-AMES-AS AS1270 468 233 235 50.2% EUnet/DE AS19 695 531 164 23.6% CSS-DOMAIN AS560 576 417 159 27.6% NEARNET-EXT-AS AS1849 359 226 133 37.0% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 312 201 111 35.6% DFN-IP AS1250 206 104 102 49.5% SINGAPORE-AS

1 0

The Top 10
by Tony Bates 22 Jul '94

22 Jul '94

This is an auto-generated mail on Fri Jul 22 18:10:00 MET DST 1994 This is a list of the "Top 10" players who if CIDRizing at the AS level could make a significant gain in the size of Internet routing tables. This may be an over-estimation but it is hoped that this can act as an incentive for the "Top 10" and others to look at their CIDR capability. A full summary of all the ASes seen in the Internet can be seen by looking in: ftp.ripe.net:cidr/stats/AS* As stated above this is auto-generated so it is not checked before it leaves my workstation. Please also find a summary of the last weeks changes in terms of withdrawn and added routes. Please note that this is only a snapshot but does some indication of ASes participating in CIDR. More information can be found in: ftp.ripe.net:cidr/stats/Delta.* Top 10 Withdrawn Routes from 15Jul94 to 22Jul94 -58 AS93 MIDNET-AS -41 AS237 NSFNETTEST14-AS -35 AS1237 EUNSOL-AS -28 AS210 WESTNET-WEST -26 AS2529 Demon Internet Ltd -19 AS3609 CYBER-NET -16 AS542 ARNET -12 AS209 WESTNET-EAST -11 AS114 SESQUINET-AS -7 AS2772 HKIGS Top 10 Added Routes from 15Jul94 to 22Jul94 45 AS2900 WN-AZ 33 AS2895 FREEnet 32 AS701 AlterNet 31 AS1759 The DataNet IP Service 29 AS1729 TIPnet 24 AS1270 EUnet/DE 20 AS1955 Computer and Automation Institute 16 AS2119 TelePost IP net 14 AS2907 SINET-AS 13 AS372 NSN-AMES-AS Here follows the last weeks "Top 10" list with the corresponding date. --- 22Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1054 588 466 44.2% AlterNet AS174 1278 901 377 29.5% NYSERNET-AS AS372 1170 846 324 27.7% NSN-AMES-AS AS1270 468 233 235 50.2% EUnet/DE AS19 695 531 164 23.6% CSS-DOMAIN AS560 576 417 159 27.6% NEARNET-EXT-AS AS1849 359 226 133 37.0% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 312 201 111 35.6% DFN-IP AS1250 206 104 102 49.5% SINGAPORE-AS --- 21Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1033 583 450 43.6% AlterNet AS174 1283 902 381 29.7% NYSERNET-AS AS372 1168 846 322 27.6% NSN-AMES-AS AS1270 468 233 235 50.2% EUnet/DE AS560 580 415 165 28.4% NEARNET-EXT-AS AS19 689 524 165 23.9% CSS-DOMAIN AS1849 358 225 133 37.2% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 298 193 105 35.2% DFN-IP AS1250 206 101 105 51.0% SINGAPORE-AS --- 20Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1027 580 447 43.5% AlterNet AS174 1261 899 362 28.7% NYSERNET-AS AS372 1149 837 312 27.2% NSN-AMES-AS AS1270 468 233 235 50.2% EUnet/DE AS19 695 528 167 24.0% CSS-DOMAIN AS560 580 414 166 28.6% NEARNET-EXT-AS AS1849 357 224 133 37.3% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 312 201 111 35.6% DFN-IP AS279 411 303 108 26.3% SURANET-AS-2 --- 19Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1024 574 450 43.9% AlterNet AS174 1276 898 378 29.6% NYSERNET-AS AS372 1140 821 319 28.0% NSN-AMES-AS AS1270 468 233 235 50.2% EUnet/DE AS19 694 527 167 24.1% CSS-DOMAIN AS560 580 414 166 28.6% NEARNET-EXT-AS AS1849 357 224 133 37.3% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS1275 312 201 111 35.6% DFN-IP AS279 408 301 107 26.2% SURANET-AS-2 --- 18Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1023 580 443 43.3% AlterNet AS174 1260 894 366 29.0% NYSERNET-AS AS372 1157 832 325 28.1% NSN-AMES-AS AS1270 469 233 236 50.3% EUnet/DE AS560 579 413 166 28.7% NEARNET-EXT-AS AS19 687 522 165 24.0% CSS-DOMAIN AS1849 359 226 133 37.0% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS2907 276 157 119 43.1% SINET-AS AS1275 308 198 110 35.7% DFN-IP --- 17Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1027 583 444 43.2% AlterNet AS174 1257 884 373 29.7% NYSERNET-AS AS372 1128 812 316 28.0% NSN-AMES-AS AS1270 469 233 236 50.3% EUnet/DE AS19 694 529 165 23.8% CSS-DOMAIN AS560 578 414 164 28.4% NEARNET-EXT-AS AS1849 358 225 133 37.2% PIPEX, Public IP EXchange AS271 240 108 132 55.0% BCNET-AS AS2907 273 154 119 43.6% SINET-AS AS1275 308 198 110 35.7% DFN-IP --- 16Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1023 582 441 43.1% AlterNet AS174 1272 900 372 29.2% NYSERNET-AS AS372 1146 821 325 28.4% NSN-AMES-AS AS1270 469 233 236 50.3% EUnet/DE AS560 579 414 165 28.5% NEARNET-EXT-AS AS19 694 529 165 23.8% CSS-DOMAIN AS1849 358 225 133 37.2% PIPEX, Public IP EXchange AS271 239 108 131 54.8% BCNET-AS AS1275 308 198 110 35.7% DFN-IP AS279 405 300 105 25.9% SURANET-AS-2 --- 15Jul94 --- ASnum NetsNow NetsCIDR NetGain % Gain Description AS701 1022 577 445 43.5% AlterNet AS174 1266 894 372 29.4% NYSERNET-AS AS372 1157 831 326 28.2% NSN-AMES-AS AS1270 444 222 222 50.0% EUnet/DE AS19 694 528 166 23.9% CSS-DOMAIN AS560 576 413 163 28.3% NEARNET-EXT-AS AS1849 357 225 132 37.0% PIPEX, Public IP EXchange AS271 237 106 131 55.3% BCNET-AS AS1275 308 198 110 35.7% DFN-IP AS279 406 303 103 25.4% SURANET-AS-2

1 0

Re: Latest and hopefully last iteration of ripe-81++
by Wilfried Woeber, UniVie/ACOnet 22 Jul '94

22 Jul '94

= * > .... = * > - A route/AS name attribute. You currently use the first line of the 'des = * c' = * > attribute to generate a name (with prtraceroute for instance). Having = * > a separate name attribute can make the query of the server (whois or what = * ever) = * > easier since it doesn't require any parsing. = * = * I strongly agree. = * =Umm... do not see the need for routes to have names - doesn't effect =prtraceroute or any other tool for that matter. Whats to parse in =description ? It is there in the aut-num object so a tool uses it..and =works as far as I can tell ? = =However, if the groups want this fine by me. Just I didn't hear any =other votes for this until now. ...Well no strong feelings about introducing a name atrtribute, but I don't see the need for it. It's very easy to spoil the first line for the description and it's comparably easy to spoil the value for a name attribute... I think the issue here is to make people aware that these strings (however they are stored) are used by software and shold give useful *and concise* information. Would some others, having strong feelings, please speak up?! = * > = * > - Include the time (hour, min, second) in the "changed" attribute. This i = * s = * > in case of several changes in the same day. Proposed syntax = * > (compatible with the older one): = * > = * > changed: <email> YYMMDD [hh:mm:ss] [+oo] = * > = * > If hh:mm:ss is missing we assume 00:00:00 +00 ??? = * > +oo if the offset from GMT. (i know, we have to deal with the times = * > zones :-) = * = * I agree not because I think that frequent updates are necessary but because = * including the time zone better identifies the exact time of the update. = * = =Makes no odds to me either way. The software allows more than one =update a day so this is a misnomer from Laurent. =However, this is VERY much a general database issue and not at all in =context with the ripe-81++ proposal I am afraid. DB chair what say you ? There are two aspects to it: - 1) do we need it? do we have to specify implementation? - 2) if we need it - what do we want? 1) My personal opinion is (shaped by the experience of dealing regularly with a *very reliable* RIPE-DB implementation) that we don't need this gadget. Given the responsiveness of the overall system I won't come to think of submitting another update before I've checked the reply from the database! So I think it's an issue of trying to solve the problem only when we have proof that it is there. And - btw - I strongly advocate keeping the possibility to submit more than one update per day!!! I consider this a feature, not a bug. 2) *IF* and when we decide to implement finer granularity, then I think wiring in the weirdness of timezones (to DST or not to DST :-) is definitely a *bad* idea! Do we really need time-information? If this is the case then we should agree on UTC. But I think what Laurent is perhaps advocating is something like an update sequence number. So my proposal would be to add an *optional* (positive, integer :-) sequence number with no other restrictions like being contiguous etc. much like the DNS serial numbers. Wilfried. -------------------------------------------------------------------------- Wilfried Woeber : e-mail: Wilfried.Woeber(a)CC.UniVie.ac.at Computer Center - ACOnet : Vienna University : Tel: +43 1 4065822 355 Universitaetsstrasse 7 : Fax: +43 1 4065822 170 A-1010 Vienna, Austria, Europe : NIC: WW144 --------------------------------------------------------------------------

1 0

Latest and hopefully last iteration of ripe-81++
by Tony Bates 21 Jul '94

21 Jul '94

Find below the latest and hopefully last iteration of ripe-81++. We have ratified all the outstanding issues with the possible exception of the ordering of the interas-in/interas-out attribute which is not a `show-stopper' at this point. We have used our preferred syntax "for now" for clarity reasons. Anyway, here it is. We must reach agreement on this at the RIPE meeting if this is to be implemented in a timely manner and preferably before. Working group chairs please take note and see if you can't get this agreed within your groups before hand. The major changes from the last draft is the inclusion of the interas-in/interas-out work and pointers to the `inet-rtr' object (already circulated). versions online as usual from: ftp://ftp.ripe.net/ripe/drafts/ripe-81++.ps ftp://ftp.ripe.net/ripe/drafts/ripe-81++.txt All comments welcome. Enjoy ! Regards, --Tony. Representation of IP Routing Policies in a Routing Registry (ripe-81++) DRAFT DRAFT DRAFT Tony Bates Elise Gerich Laurent Joncheray Jean-Michel Jouanigot Daniel Karrenberg Marten Terpstra Jessica Yu Document-ID: ripe-1nn Obsoletes: ripe-81 July, 1994 ABSTRACT This document is an update to the original `ripe- 81'[1] proposal for representing and storing routing polices within the RIPE database. It incorporates several extensions proposed by Merit Inc.[2] and gives details of a generalised IP routing policy representa- tion to be used by all Internet routing registries. It acts as both tutorial and provides details of database objects and attributes that use and make up a routing registry. ripe-1nn.txt July, 1994 - 2 - Table of Contents 1 Introduction ................................................ ? 2 Organisation of this Document ............................... ? 3 General Representation of Policy Information ................ ? 4 The Routing Registry and the RIPE Database .................. ? 5 The Route Object ............................................ ? 6 The Autonomous System Object ................................ ? 7 The AS Macro Object ......................................... ? 8 The Community Object ........................................ ? 9 Representation of Routing Policies .......................... ? 10 Future Extensions .......................................... ? 11 References ................................................. ? 12 Authors Addresses .......................................... ? Appendix A - Syntax for the "aut-num" object .................. ? Appendix B - Syntax for the "community" object ................ ? Appendix C - Syntax for the "as-macro" object ................. ? Appendix D - Syntax for the "route" object .................... ? Appendix E - List of reserved words ........................... ? Appendix F - Motivations for RIPE-81++ ........................ ? Appendix G - Transition strategy from RIPE-81 to RIPE-81++ .... ? ripe-1nn.txt July, 1994 - 3 - 1. Introduction This document is a much revised version of the RIPE routing registry document known as ripe-81[1]. Since its inception in February, 1993 and the establishment of the RIPE routing registry, several addi- tions and clarifications have come to light which can be better presented in a single updated document rather than separate addenda. Some of the text remains the same the as the original ripe-81 docu- ment keeping its tutorial style mixed with details of the RIPE data- base objects relating to routing policy representation. However this document does not repeat the background and historical remarks in ripe-81. For these please refer to the original document. It should be noted that whilst this document specifically references the RIPE database and the RIPE routing registry one can easily read "Regional routing registry" in place of RIPE as this representation is certainly general and flexible enough to be used outside of the RIPE community incorporating many ideas and features from other routing registries in this update. As you can see this document has a new RIPE document identification number but can also be referred to as ripe-81++. Appendix F summar- ises the changes from ripe-81 plus the motivation for these changes. We would like to acknowledge many people for help with this docu- ment. Specifically, Peter Lothberg who was a co-author of the ori- ginal ripe-81 document for his many ideas and Gilles Farrache. We would also like to thank the RIPE routing working group for their review and comment. Finally, we like to thank Merit Inc. for many constructive comments and ideas and making the routing registry a worldwide Internet service. We would also like to acknowledge the funding provided by the PRIDE project run in conjunction with the RARE Technical Program, RIPE and the RIPE NCC without which this paper would not have been possible. 2. Organisation of this Paper This paper acts as both a basic tutorial for understanding routing policy and provides details of objects and attributes used within an Internet routing registry to store routing policies. Section 3 describes general issues about IP routing policies and their representation in routing registries. Experienced readers may wish to skip this section. Section 4 provides an overview of the RIPE database, its basic concepts, schema and objects which make up the database itself. It highlights the way in which the RIPE database splits routing information from allocation information. Sections 5, 6, 7 and 8 detail all the objects associated with routing policy representation. Section 9 gives a fairly extensive "walk through" of how these objects are used for expressing routing policy and the general principles behind their use. Section 10 provides a list of references used throughout this document. Appendix A, B, C and D document the formal syntax for the database objects and attributes. Appendix F details the main changes from ripe-81 and motivations for these changes. Appendix G tackles the issues of transition from ripe-1nn.txt July, 1994 - 4 - ripe-81 to ripe-81++. ripe-1nn.txt July, 1994 - 5 - 3. General Representation of Policy Information Networks, Network Operators and Autonomous Systems Throughout this document an effort is made to be consistent with terms so as not to confuse the reader. When we talk about "networks" we mean physical networks which have a unique classless IP network number: Layer 3 entities. We do not mean organisations. We call the organisations operating networks "network operators". For the sake of the examples we divide network operators into two categories: "service providers" and "customers". A "service pro- vider" is a network operator who operates a network to provide Internet services to different organisations, its "customers". The distinction between service providers and customers is not clear cut. A national research networking organisation frequently acts as a service provider to Universities and other academic organisations, but in most cases it buys international connectivity from another service provider. A University networking department is a customer of the research networking organisation but in turn may regard University departments as its customers. An Autonomous System (AS) is a group of IP networks having a single clearly defined routing policy which is run by one or more network operators. Inside ASes IP packets are routed using one or more Inte- rior Routing Protocols (IGPs). In most cases interior routing deci- sions are based on metrics derived from technical parameters like topology, link speeds and load(1). ASes exchange routing information with other ASes using Exterior Routing Protocols (EGPs). Exterior routing decisions are frequently based on policy based rules rather than purely on technical parame- ters. Tools are needed to configure complex policies and to commun- icate those policies between ASes while still ensuring proper opera- tion of the Internet as a whole. Some EGPs like BGP-3 [8] and BGP-4 [9] provide tools to filter routing information according to policy rules and more. None of them provides a mechanism to publish or com- municate the policies themselves. Yet this is critical for opera- tional coordination and fault isolation among network operators and thus for the operation of the global Internet as a whole. This document describes a "Routing Registry" providing this functional- ity. _________________________ (1) The entity we refer to as an AS is frequently and more generally called a routing domain with the AS just being an implementation vehicle. We have decided to use the term AS exclusively because it relates more direct- ly with the database objects and routing tools. By us- ing only one term we hope to reduce the number of con- cepts and to avoid confusion. The academically inclined reader may forgive us. ripe-1nn.txt July, 1994 - 6 - Routing Policies The exchange of routing information between ASes is subject to rout- ing policies. Consider the case of two ASes, X and Y exchanging routing information: NET1 ...... ASX <---> ASY ....... NET2 ASX knows how to reach a network called NET1. It does not matter whether NET1 is belonging to ASX or some other AS which exchanges routing information with ASX either directly or indirectly; we just assume that ASX knows how to direct packets towards NET1. Likewise ASY knows how to reach NET2. In order for traffic from NET2 to NET1 to flow between ASX and ASY, ASX has to announce NET1 to ASY using an external routing protocol. This states that ASX is willing to accept traffic directed to NET1 from ASY. Policy thus comes into play first in the decision of ASX to announce NET1 to ASY. In addition ASY has to accept this routing information and use it. It is ASY's privilege to either use or disregard the information that ASX is willing to accept traffic for NET1. ASY might decide not to use this information if it does not want to send traffic to NET1 at all or if it considers another route more appropriate to reach NET1. So in order for traffic in the direction of NET1 to flow between ASX and ASY, ASX must announce it to ASY and ASY must accept it from ASX: resulting packet flow towards NET1 <<=================================== | | announce NET1 | accept NET1 --------------> + -------------> | AS X | AS Y | <------------- + <-------------- accept NET2 | announce NET2 | | resulting packet flow towards NET2 ===================================>> Ideally, and seldom practically, the announcement and acceptance policies of ASX and ASY are identical. ripe-1nn.txt July, 1994 - 7 - In order for traffic towards NET2 to flow, announcement and accep- tance of NET2 must be in place the other way round. For almost all applications connectivity in just one direction is not useful at all. It is important to realise that with current destination based for- warding technology routing policies must eventually be expressed in these terms. It is relatively easy to formulate reasonable policies in very general terms which CANNOT be expressed in terms of announc- ing and accepting networks. With current technology such policies are almost always impossible to implement. Usually policies are not configured for each network separately but for groups of networks. In practise these groups are almost always defined by the networks forming one or more ASes. Routing Policy limitations The generic example of a reasonable but un-implementable routing is a split of already joined packet streams based on something other than destination address. Once traffic for the same destination network passes the same router, or the same AS at our level of abstraction, it will take exactly the same route to the destina- tion(2). In a concrete example AS Z might be connected to the outside world by two links. AS Z wishes to reserve these links for different kinds of traffic, let's call them black and white traffic. For this purpose the management of AS Z keeps two lists of ASes, the black and the white list. Together these lists comprise all ASes in the world reachable from AS Z. "W" <---> ... AS Z .... NET 3 <---> "B" It is quite possible to implement the policy for traffic originating in AS Z: AS Z will only accept announcements for networks in white ASes on the white link and will only accept announcements for net- works in black ASes on the black link. This causes traffic from networks within AS Z towards white ASes to use the white link and likewise traffic for black ASes to use the black link. Note that this way of implementing things makes it necessary to decide on the colour of each new AS which appears before traffic can be sent to it from AS Z. A way around this would be to accept only _________________________ (2) Disregarding special cases like "type of service" routing, load sharing and routing instabilities. ripe-1nn.txt July, 1994 - 8 - white announcements via the white link and to accept all but white announcements on the black link. That way traffic from new ASes would automatically be sent down the black link and AS Z management would only need to keep the list of white ASes rather than two lists. Now for the unimplementable part of the policy. This concerns traffic towards AS Z. Consider the following topology: B AS ---) "W" W AS ---) ---> B AS ---)>> AS A ---> ... AS Z .... NET 3 B AS ---) ---> W AS ---) "B" As seen from AS Z there are both black and white ASes "behind" AS A. Since ASes can make routing decisions based on destination only, AS A and all ASes between AS A and the two links connecting AS Z can only make the same decision for traffic directed at a network in AS Z, say NET 3. This means that traffic from both black and white ASes towards NET 3 will follow the same route once it passes through AS A. This will either be the black or the white route depending on the routing policies of AS A and all ASes between it and AS Z. The important thing to note is that unless routing and forwarding decisions can be made based on both source and destination addresses, policies like the "black and white" example cannot be implemented in general because "once joined means joined forever". Access Policies Access policies contrary to routing policies are not necessarily defined in terms of ASes. The very simplest type of access policy is to block packets from a specific network S from being forwarded to another network D. A common example is when some inappropriate use of resources on network D has been made from network S and the prob- lem has not been resolved yet. Other examples of access policies might be resources only accessible to networks belonging to a par- ticular disciplinary group or community of interest. While most of these policies are better implemented at the host or application level, network level access policies do exist and are a source of connectivity problems which are sometimes hard to diagnose. There- fore they should also be documented in the routing registry accord- ing to similar requirements as outlined above. Routing v Allocation information The RIPE database contains both routing registry and address space allocation registry information. In the past the database schema combined this information. Because RIPE was tasked with running both an allocation and routing registry it seemed natural to initially ripe-1nn.txt July, 1994 - 9 - combine these functions. However, experience has shown that a clear separation of routing information from allocation is desirable. Often the maintainer of the routing information is not the same as the maintainer of the allocation information. Also, in other parts of the world there are different registries for each kind of infor- mation. Whilst the actual routing policy objects will be introduced in the next section it is worthy of note that a transition from the current objects will be required. This is described with in Appendix G. This split in information represents a significant change in the representational model of the RIPE database. Appendix F expands on the reasons for this a little more. Tools The network operators will need a series of tools for policy rout- ing. Some tools are already available to perform some of the tasks. Most notably, the PRIDE tools [3] from the PRIDE project started in September 1993 as well as others produced by Merit Inc [4] and CERN [5]. These tools will enable them to use the routing policy stored in the RIPE routing registry to perform such tasks as check actual routing against policies defined, ensure consistency of policies set by dif- ferent operators, and simulate the effects of policy changes. Work continues on producing more useful tools to service the Inter- net community. ripe-1nn.txt July, 1994 - 10 - 4. The Routing Registry and the RIPE Database One of the activities of RIPE is to maintain a database of Euro- pean IP networks, DNS domains and their contact persons along with various other kinds of network management information. The database content is public and can be queried using the whois protocol as well as retrieved as a whole. This supports NICs/NOCs all over Europe and beyond to perform their respective tasks. The RIPE database combines both allocation registry and routing registry functions. The RIPE allocation registry contains data about address space allocated to specific enterprises and/or delegated to local registries as well as data about the domain name space. The allocation registry is described in separate documents [6,7] and outside the scope of this document. Database Objects Each object in the database describes a single entity in the real world. This basic principle means that information about that entity should only be represented in the corresponding data- base object and not be repeated in other objects. The whois ser- vice can automatically display referenced objects where appropriate. The types of objects stored in the RIPE database are summarised in the table below: R Object Describes References ____________________________________________________________________ B person contact persons A inetnum IP address space person A domain DNS domain person R aut-num autonomous system person (aut-num,community) R as-macro a group of autonomous systems person, aut-num R community community person R route a route being announced aut-num, community R clns CLNS address space and routing person The first column indicates whether the object is part of the alloca- tion registry (A), the routing registry (R) or both (B). The last column indicates the types of objects referenced by the particular type of object. It can be seen that almost all objects reference contact persons. Objects are described by attributes value pairs, one per line. Objects are separated by empty lines. An attribute that consists ripe-1nn.txt July, 1994 - 11 - of multiple lines should have the attribute name repeated on consecutive lines. The information stored about network 192.87.45.0 consists of three objects, one network object and two person objects and looks like this: inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE person: Daniel Karrenberg address: RIPE Network Coordination Centre (NCC) address: Kruislaan 409 address: NL-1098 SJ Amsterdam address: Netherlands phone: +31 20 592 5065 fax-no: +31 20 592 5090 e-mail: dfk(a)ripe.net nic-hdl: DK58 changed: ripe-dbm(a)ripe.net 920826 source: RIPE person: Marten Terpstra address: RIPE Network Coordination Centre (NCC) address: PRIDE Project address: Kruislaan 409 address: NL-1098 SJ Amsterdam address: Netherlands phone: +31 20 592 5064 fax-no: +31 20 592 5090 e-mail: Marten.Terpstra(a)ripe.net nic-hdl: MT2 notify: marten(a)ripe.net changed: marten(a)ripe.net 931230 source: RIPE Objects are stored and retrieved in this tag/value format. The RIPE NCC does not provide differently formatted reports because any desired format can easily be produced from this generic one. ripe-1nn.txt July, 1994 - 12 - Routing Registry Objects The main objects comprising the routing registry are "aut-num" and "route", describing an autonomous system and a route respectively. It should be noted that routes not described in the routing registry should never be routed in the Internet itself. The autonomous system (aut-num) object provides contact information for the AS and describes the routing policy of that AS. The routing policy is described by enumerating all neighbouring ASes with which routing information is exchanged. For each neighbour the routing policy is described in terms of exactly what is being sent (announced) and allowed in (accepted). It is important to note that this is exactly the part of the global policy over which an AS has direct control. Thus each aut-num object describes what can indeed be implemented and enforced locally by the AS concerned. Combined together all the aut-num objects provide the global routing graph and permit to deduce the exact routing policy between any two ASes. While the aut-num objects describe how routing information is pro- pagated, the route object describes a single route injected into the external routing mesh. The route object references the AS injecting (originating) the route and thereby indirectly provides contact information for the originating AS. This reference also provides the primary way of grouping routes into larger collections. This is necessary because describing routing policy on the level of single routes would be awkward to impractical given the number of routes in the Internet which is about 20,000 at the time of this writing. Thus routing policy is most often defined for groups of routes by originating AS. This method of grouping is well supported by current exterior routing protocols. The route object also refer- ences community objects described below to provide another method of grouping routes. Modification of aut-num object itself and the referencing by route objects is strictly protected to provide net- work operators control over the routing policy description and the routes originated by their ASes. Sometimes even keeping track of groups of routes at the AS level is cumbersome. Consider the case of policies described at the transit provider level which apply transitively to all customers of the transit provider. Therefore another level of grouping is provided by the as-macro object which provides groups of ASes which can be referenced in routing policies just like single ASes. Membership of as-macro groups is also strictly controlled. Sometimes there is a need to group routes on different criteria than ASes for purposes like statistics or local access policies. This is provided by the community object. A community object is much like an AS but without a routing policy. It just describes a group of routes. This is not supported at all by exterior routing protocols and depending on aggregation of routes may not be generally usable to define routing policies. It is suitable for local policies and non-routing related purposes. ripe-1nn.txt July, 1994 - 13 - These routing related objects will be described in detail in the sections below. ripe-1nn.txt July, 1994 - 14 - 5. The Route Object As stated in the previous chapter routing and address space alloca- tion information are now clearly separated. This is performed with the introduction of the route object. The route object will contain all the information regarding a routing announcement. All routing related attributes are removed from the inetnum object. Some old attributes are obsoleted: connect, routpr-l, bdryg-l, nsf- in, nsf-out, gateway). The currently useful routing attributes are moved to the route object: aut-sys becomes origin, ias-int will be encoded as part of the "to be proposed" `border-router' object and comm-list simply moves. See [6] for detail of the "inetnum" object definition. The information in the old inetnum object inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra connect: RIPE NSF WCW aut-sys: AS3333 comm-list: SURFNET ias-int: 192.87.45.80 AS1104 ias-int: 192.87.45.6 AS2122 ias-int: 192.87.45.254 AS2600 rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE will be distributed over two objects: ripe-1nn.txt July, 1994 - 15 - inetnum: 192.87.45.0 netname: RIPE-NCC descr: RIPE Network Coordination Centre descr: Amsterdam, Netherlands country: NL admin-c: Daniel Karrenberg tech-c: Marten Terpstra rev-srv: ns.ripe.net rev-srv: ns.eu.net notify: ops(a)ripe.net changed: tony(a)ripe.net 940110 source: RIPE route: 192.87.45.0/24 descr: RIPE Network Coordination Centre origin: AS3333 comm-list: SURFNET changed: dfk(a)ripe.net 940427 source: RIPE The route object is used to represent a single route originated into the Internet routing mesh. The actual syntax is given in Appendix D. However, there are several important aspects of the attributes worthy of note. The value of the route attribute will be a classless address. It represents the exact route being injected into the routing mesh. The representation of classless addresses is described in [10]. The value of the origin attribute will be an AS reference of the form AS1234 referring to an aut-num object. It represents the AS injecting this route into the routing mesh. The "aut-num" object (see below) thus referenced provides all the contact information for this route. Special cases: There can only be a single originating AS in each route object. However in todays Internet sometimes a route is injected by more than one AS. This situation is potentially dangerous as it can create conflicting routing policies for that route and requires coordination between the originating ASes. In the routing registry this is represented by multiple route objects. This is a departure from the one route (net), one AS principle of the ripe-81 routing registry. The consequences for the different tools based in the routing registry will need to be evaluated and possibly additional consistency checking of the database is needed. ripe-1nn.txt July, 1994 - 16 - The examples below will illustrate the usage of the route object further. Suppose three chunks of address space of 2 different enterprises represented by the following inetnum objects: Examples inetnum: 193.0.1.0 netname: ENT-1 descr: Enterprise 1 ... inetnum: 193.0.8.0 netname: ENT-2 descr: Enterprise 2 ... inetnum: 193.0.9.0 netname: ENT-2-SPEC descr: Enterprise 2 ... Supposing that the Enterprises have their own AS numbers straight application of routing without aggregation would yield: route: 193.0.1.0/24 descr: Enterprise 1 origin: AS1 ... route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 ... route: 193.0.9.0/24 descr: Enterprise 2 origin: AS2 ... NB: This representation can be achieved by straight translation from the ripe-81 representation. See Appendix G for more details. Homogeneous Aggregation The two chunks of address space of Enterprise 2 can be represented by one aggregate route turning two route objects into one and poten- tially saving routing table space for one route. ripe-1nn.txt July, 1994 - 17 - route: 193.0.8.0/23 descr: Enterprise 2 origin: AS2 ... Note that AS2 can also decide to originate all routes mentioned so far, two 24-bit prefixes and one 23-bit prefix. This case would be represented by storing all three route objects in the database. In this particular example the additional routes will not add any func- tionality however and only increase the amount of routes announced unnecessarily. Heterogeneous Aggregation Consider the following case however: route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 ... route: 193.0.9.0/24 descr: Enterprise 2 / Special origin: AS2 comm-list: SPECIAL ... Now the prefix 193.0.9.0/24 belongs to community SPECIAL (this com- munity may well not be relevant to routing) and the other prefix originated by AS2 does not. If AS2 aggregates these prefixes into the 193.0.8.0/23 prefix, routing policies based on the community value SPECIAL cannot be implemented in general, because there is no way to distinguish between the special and the not-so-special parts of AS2. If another AS has the policy to accept only routes to members of community SPECIAL it cannot implement it, because accept- ing the route to 193.0.8.0/23 would also route to 193.0.8.0/24 and not accepting this route would lose connectivity to the special part 193.0.9.0/24. We call aggregate routes consisting of components belonging to different communities or even different ASes "hetero- geneous aggregates". The problems introduced with heterogeneous aggregates are that once the homogeneous routes are withdrawn one cannot tell if a more specific part of the heterogeneous has a different policy. However, if can be counter argued that knowing this policy is of little use if you cannot implement a routing policy based on the less specific (and only route present) heterogeneous aggregate. In fact, this displays a facet of CIDR itself in that one may actually compromise slight variations on policy over announcing a larger (albeit ripe-1nn.txt July, 1994 - 18 - heterogeneous in terms of policy) aggregate to save address space. However, it is still useful to be able to document these variations in policy especially when this homogeneous more specific route is just being withdrawn. For this one can use the "withdrawn" attri- bute. The withdrawn attribute can serve to both indicate that a less specific aggregate is in fact heterogeneous and also allow the gen- eral documenting of route withdrawal. So there has to be a way for AS2 to document this even if it does not originate the route to 193.0.9.0/24 any more. This can be done with the "withdrawn" attribute of the route object. The aggregate route to 193.0.8.0/23 is now be registered as: route: 193.0.8.0/23 descr: Enterprise 2 origin: AS2 ... With the two homogeneous routes marked as withdrawn from the Inter- net routing mesh but still preserving their original routing infor- mation. route: 193.0.8.0/24 descr: Enterprise 2 origin: AS2 withdrawn: 940701 ... route: 193.0.9.0/24 descr: Enterprise 2 / Special origin: AS2 comm-list: SPECIAL withdrawn: 940701 ... It should be noted that the date value used in the withdrawn attri- bute can only be in the past. Proxy Aggregation The next step of aggregation are aggregates consisting of more than one AS. This generally means one AS is aggregating on behalf of another. It is called proxy aggregation. Proxy aggregation should be done with great care and always coordinates with other providers announcing the same route. Consider the following: ripe-1nn.txt July, 1994 - 19 - route: 193.0.0.0/20 descr: All routes known by AS1 in a single package origin: AS1 ... route: 193.0.1.0/24 descr: Foo origin: AS1 withdrawn: 940310 ... route: 193.0.8.0/24 descr: Bar origin: AS2 withdrawn: 940310 ... route: 193.0.9.0/24 descr: Bar-2 origin: AS2 withdrawn: 940310 comm-list: SPECIAL ... If AS1 announced no other routes to a single homed neighbouring AS, that neighbour can in general either take that route or leave it but not differentiate between AS1 and AS2. Note: If the neighbor was previously configured to accept routes originating in AS2 but not in AS1 they lose connectivity to AS2 as well. This means that proxy aggregation has to be done carefully and in a well coordinated fashion. The information in the withdrawn route object can help to achieve that. Aggregates with Holes If we assume that the world of our example still consists of only three chunks of address space the aggregate above contains what are called holes, parts of an aggregate that are not reachable via the originator of the route. From the routing information itself one cannot tell whether these are holes and what part of the route falls inside one. The only way to tell is to send a packet there and see ripe-1nn.txt July, 1994 - 20 - whether it gets to the destination, or an ICMP message is received back, or there is silence. On the other hand announcing aggregates with holes is quite legitimate. Consider a 16-bit aggregate with only one 24-bit prefix unreachable. The savings in routing table size by far outweigh the hole problem. For operational reasons however it is very useful to register these holes in the routing registry. Consider the case where a remote net- work operator experiences connectivity problems to addresses inside an aggregate route. If the packets are getting to the AS announcing the aggregate and there are no more specific routes, the normal cause of action is to get in touch with the originating AS of the aggregate route and ask them to fix the problem. If the address falls into a hole this is futile. Therefore problem diagnosis can be sped up and unnecessary calls prevented by registering the holes in the routing registry. We do this by using the "hole" attribute. In our example the representation would be: route: 193.0.0.0/20 descr: All routes known by AS1 origin: AS1 hole: 193.0.0.0/24 hole: 193.0.2.0/23 hole: 193.0.4.0/22 hole: 193.0.10.0/23 hole: 193.0.12.0/22 ... Note: there would also be two routes with the withdrawn attribute as displayed above (i.e. 193.0.8.0/24 and 193.0.9.0/24) Multiple Proxy Aggregation Finally suppose that AS2 decides to announce the same aggregate, they would add the following route object to the registry: route: 193.0.0.0/20 descr: All routes known by AS2 origin: AS2 hole: 193.0.0.0/24 hole: 193.0.2.0/23 hole: 193.0.4.0/22 hole: 193.0.10.0/23 hole: 193.0.12.0/22 ... As per the update procedures below both AS1 and AS2 will be notified that there already is a route to the same prefix in the registry. This multiple proxy aggregation is very dangerous to do if the sub- ripe-1nn.txt July, 1994 - 21 - aggregates of the route are not the same. It is still dangerous when the sub-aggregates are consistent but connectivity to the sub- aggregates varies widely between the originators. Route object update procedures Adding a route object will be have to be authorised by the guardian of the originating AS. The actual implementation of this is outside the scope of this document. This guarantees that an AS guardian has full control over the registration of the routes it announces. What is an Inter-AS network ? An inter-AS network(3) exists for the purpose of passing traffic and routing information between different autonomous systems. The most simple example of an inter-AS network is a point-to-point link, con- necting exactly two ASes. Each end of such a link is connected to an interface of router belonging to each of the autonomous systems. More complex examples are broadcast type networks with multiple interfaces connecting multiple ASes with the possibility of more than one connection per AS. Consider the following example of three routers 1, 2 and 3 with interfaces a through f connected by two inter-AS networks X and Y: X Y a1b --- c2d --- e3f Suppose that network X is registered in the routing registry as part of AS1 and net Y as part of AS3. If traffic passes from left to right prtraceroute will report the following sequence of interfaces and ASes: a in AS1 c in AS1 e in AS3 The traceroute algorithm enumerates only the receiving interfaces on the way to the destination. In the example this leads to the pas- sage of AS2 going unnoticed. This is confusing to the user and will also generate exceptions when the path found is checked against the routing registry. _________________________ (3) Inter-AS IP networks are those networks are currently called FIXes, IXFs, DMZs, NAPs, GIX and many other acronyms. ripe-1nn.txt July, 1994 - 22 - For operational monitoring tools such as prtraceroute it is neces- sary to know which interface on an inter-AS network belongs to which AS. If AS information is not known about interfaces on an inter-AS network, tools like prtraceroute cannot determine correctly which ASes are being traversed. All interfaces on inter-AS networks will are described in a separate object know as the `inet-rtr' object [15]. ripe-1nn.txt July, 1994 - 23 - 6. The Autonomous System Object Autonomous Systems An Autonomous System (AS) is a group of IP networks run by one or more network operators which has a single and clearly defined rout- ing policy. An AS has a unique number associated with it which is used both in exchange of exterior routing information and as an identifier of the AS itself. Exterior routing protocols such as BGP and EGP are used to exchange routing information between ASes. In routing terms an AS will normally use one or more interior gate- way protocols (IGPs) in conjunction with some sort of common agreed metrics when exchanging network information within its own AS. The term AS is often confused or even misused as a convenient way of grouping together a set of networks which belong under the same administrative umbrella even if within that group of networks there are various different routing policies. We provide the "community" concept for such use. ASes can strictly have only one single rout- ing policy. The creation of an AS should be done in a conscious and well coordi- nated manner to avoid creating ASes for the sake of it, perhaps resulting in the worst case scenario of one AS per routing announce- ment. It should be noted that there is a limited number of AS numbers available. Also creating an AS may well increase the number of AS paths modern EGPs will have to keep track of. This aggravates what is known as "the routing table growth problem". This may mean that by applying the general rules for the creation and allocation of an AS below, some re-engineering may well be needed. However, this may be the only way to actually implement the desired routing policy anyway. The creation and allocation of an AS should be done with the following recommendations in mind: o Creation of an AS is only required when exchanging routing information with other ASes. Some router implementations make use of an AS number as a form of tagging to identify the rout- ing process. However, it should be noted that this tag does not need to be unique unless routing information is indeed exchanged with other ASes. o For a simple case of customer networks connected to a single service provider, the IP network should normally be a member of the service providers AS. In terms of routing policy the IP network has exactly the same policy as the service provider and there is no need to make any distinction in routing informa- tion. This idea may at first seem slightly alien to some, but it highlights the clear distinction in the use of the AS number ripe-1nn.txt July, 1994 - 24 - as a representation of routing policy as opposed to some form of administrative use. o If a network operator connects to more than one AS with dif- ferent routing policies then they need to create their own AS. In the case of multi-homed customer networks connected to two service providers there are at least two different routing pol- icies to a given customer network. At this point the customer networks will be part of a single AS and this AS would be dis- tinct from either of the service providers ASes. This allows the customer the ability of having a different representation of policy and preference to the different service providers. This is the ONLY case where a network operator should create its own AS number. o As a general rule one should always try to populate the AS with as many routes as possible, providing all routes conform to the same routing policy. Each AS is represented in the RIPE database by both an AS object and the route objects representing the routes originated by the AS. The AS object stores descriptive, administrative and contact information about the AS as well as the routing policies of the AS in relation to all neighbouring ASes. The origin attributes of the route objects define the set of routes originated by the AS. Each route object can have exactly one origin attribute. Route objects can only be created and updated by the "guardian" of the AS and not by those immediately responsible for the particular routes referenced therein. This ensures that opera- tors, especially service providers, remain in control of AS routing announcements. The AS object itself is used to represent a description of adminis- trative details and the routing policies of the AS itself. The AS object definition is depicted as follows. ripe-1nn.txt July, 1994 - 25 - Example: aut-num: AS1104 descr: NIKHEF-H Autonomous system as-in: from AS1213 100 accept AS1213 as-in: from AS1913 100 accept AS1913 as-in: from AS1755 150 accept ANY as-out: to AS1213 announce ANY as-out: to AS1913 announce ANY as-out: to AS1755 announce AS1104 AS1913 AS1213 tech-c: Rob Blokzijl admin-c: Eric Wassenaar guardian: as-guardian(a)nikhef.nl changed: ripe-dbm(a)ripe.net 920910 source: RIPE See Appendix A for a complete syntax definition of the "aut-num" object. It should be noted that this representation provides two things: o a set of routes. o a description of administrative details and routing policies. The set of routes can be used to generate network list based confi- guration information as well as configuration information for exte- rior routing protocols knowing about ASes. This means an AS can be defined and is useful even if it does not use routing protocols which know about the AS concept. ripe-1nn.txt July, 1994 - 26 - Description of local connections between ASes - "interas- in/interas-out". Description of local connections between ASes is necessary only if the ASes are connected by more than one link and routing policy differs between the two links. These local differences are visible only to the two ASes concerned and not beyond them. Note: The description of local connections is applicable only to very few configurations. The tutorial description below is less detailed than other parts of this document. Those interested but not experienced should contact their routing registry for support. Often two ASes will have more than one physical connection between them. In practice certain local policies my be placed on these inter-AS connections as agreed by the two ASes. If we look at the example of two ASes, AS2 and AS3 connected with links 193.0.1.1- 193.0.1.2 and 193.0.1.5-193.0.1.6: Example: LINK1 193.0.1.1 +----------+ 193.0.1.2 | | AS1------AS2== ==AS3-----AS4 | | 193.0.1.5 +----------+ 193.0.1.6 LINK2 It may be that AS2 wants to use LINK2 only for traffic towards AS4. LINK1 is used for traffic to AS3 and as backup to AS4, should LINK2 fail. While this is purely of local information and at the AS level will have no significance per se to any other ASes except AS2 and AS3 this may be useful to represent. The way this is done is by using the attributes "interas-in" and "interas-out". The exact syn- tax is given in Appendix A. However, if we follow this example through in terms of AS2 we would represent this policy as follows: Example: aut-num: AS2 as-in: from AS3 10 accept AS3 AS4 as-out: to AS3 announce AS1 AS2 interas-in: from AS3 193.0.1.1/32 193.0.1.2/32 (pref-type=5) accept AS3 interas-in: from AS3 193.0.1.1/32 193.0.1.2/32 (pref-type=15) accept AS4 interas-in: from AS3 193.0.1.5/32 193.0.1.6/32 (pref-type=10) accept AS4 ... ripe-1nn.txt July, 1994 - 27 - Here we see additional local link based information in terms of the IP addresses of the link. It should be noted that the preference on interas-in attributes is only of relevance to other interas-in attributes in the same AS and not to as-in or default attribute. The parentheses and keyword are syntactic sugar to allow further extensions. If pref-type=MED is specified the preference indicated by the remote as via the multi-exit discriminator metric of BGP is used. Of course this type on inter-AS policy should always be bila- terally agreed to avoid asymmetry and in practice there may need to be corresponding interas-in attributes in the policy representation of AS3. The interas-out attribute is similar in the same way to interas-in as as-out to as-in. The one major difference being that interas-out allows to associate an outgoing metric with each route. It is impor- tant to note that this metric is just passed to the peer AS and it is at the peer AS's discretion to use or ignore it. A special value of IGP specifies that the metric passed to the receiving AS will be derived from the IGP of the sending AS. In this way the peer AS can choose the optimal link for its traffic as determined by the sending AS. Descriptions of local policies do not replace the global policy described in as-in, as-out and other policy attributes which should be specified too. If the global policy mentions more routes than the local policy then local preferences for these routes are assumed to be equal for all links. If a route is only referenced in some interas-in/out attributes and not in others it is assumed not announced/accepted on the links concerned (see the example above). The key difference between interas-in/interas-out and as-in/as-in attributes is the former describes a local inter-AS policy and the latter the general inter-AS policy as seen by other ASes. The gen- eral policy should always be defined. The local inter-AS policy should only be defined when such a policy really exists and the implications of setting such policies is fully understood. ripe-1nn.txt July, 1994 - 28 - How to describe the exclusion policy of a certain AS - "as-exclude" Some ASes have a routing policy based on the exclusion of certain routes if for whatever reason a certain AS is used as transit. Whilst, this is in general not good practice as it makes implicit assumptions on topology with asymmetry a possible outcome if not coordinated, this case needs to be accommodated within the routing policy representation. The way this is achieved is by making use of the "as-exclude" attri- bute. The precise syntax of this attribute can be found in Appendix A along with the rest of the defined syntax for the "aut-num" object. However, some explanation of the use of this attribute is useful. If we have the following example topology. Example: AS4--------AS3 | | | | | | AS1--------AS2--------AS5 With a simple corresponding policy like so: Example: aut-num: AS1 as-in: from AS2 100 accept ANY as-out: to AS2 announce AS1 as-exclude: exclude AS4 to ANY .... We see an interesting policy. What this says in simple terms is AS1 doesn't want to reach anything if it transit AS4. This can be a per- fectly valid policy. However, it should be realised that for what- ever reason AS2 decides to route to AS3 via AS4 then immediately AS1 has no connectivity to AS3 or if AS1 is running default to AS2 pack- ets from AS1 will still flow via AS4. The important point about this is that whilst AS1 can advise its neighbours of its policy it has no direct control on how it can enforce this policy to neighbours upstream. Another interesting scenario to highlight the unexpected result of using such an "as-exclude" policy. If we assume in the above example AS2 preferred AS4 to reach AS3 and AS1 did not use default routing then as stated AS1 would have no connectivity to AS3. Now lets sup- pose that for example the link between AS2 and AS4 went down for some reason. Like so: ripe-1nn.txt July, 1994 - 29 - Example: AS4--------AS3 | | AS1--------AS2--------AS5 Suddenly AS1 now has connectivity to AS3. This unexpected behavior should be considered when created policies based on the "as-exclude" attribute. The second problem with this type of policy is the potential of asymmetry. In the original example we saw the correct policy from AS1's point of view but if ASes with connectivity through AS4 do not use a similar policy you have asymmetric traffic and policy. If an AS uses such a policy they must be aware of the consequences of its use. Namely that the specified routes which transit the AS (i.e. routing announcements with this AS in the AS path information) in question will be excluded. If not coordinated this can easily cause asymmetry or even worse loss of connectivity to unknown ASes behind (or in front for that matter) the transit AS in question. With this in mind this attribute can only be viewed as a form of advisory to other service providers. However, this does not preclude its use with policy based tools if the attribute exists. By having the ability to specify a route keyword based on any of the four notations given in the syntax it allows the receiving AS to specify what routes it wishes to exclude through a given transit AS to a network granularity. ripe-1nn.txt July, 1994 - 30 - 7. AS Macros It may be difficult to keep track of each and every new AS that is represented in the routing registry. A convenient way around this is to define an `AS Macro' which essentially is a convenient way to group ASes. This is done so that each and every AS guardian does not have to add a new AS to it's routing policy as described by the as- in and as-out attributes of it's AS object. However, it should be noted that this creates an implicit trust on the guardian of the AS-Macro. An AS-Macro can be used in <routing policy expressions> for the "as-in" and "as-out" attributes in the aut-num object. The AS-Macro object is then used to derive the list or group of ASes. A simple example would be something like: Example: aut-num: AS786 as-in: from AS1755 100 accept AS-EBONE AND NOT AS1104 as-in: from AS1755 100 accept AS-EBONE AND NOT AS1104 as-out to AS1755 announce AS786 ..... Where the as-macro object for AS-EBONE is as follows: as-macro: AS-EBONE descr: ASes routed by EBONE as-list: AS2121 AS1104 AS2600 AS2122 as-list: AS1103 AS1755 AS2043 guardian: guardian(a)ebone.net ...... So the policy would be evaluated to: aut-num: AS786 as-in: from AS1755 100 accept (AS2121 OR AS1104 OR AS2600 OR AS2122 as-in: from AS1755 100 accept AS1103 OR AS1755 OR AS2043) AND NOT AS1104 ...... It should be noted that the above examples incorporates the rule for line wrapping as defined in Appendix A for policy lines. See Appen- dix C for a definition on the AS-Macro syntax. ripe-1nn.txt July, 1994 - 31 - 8. The Community Object A community is a group of routes that cannot be represented by an AS or a group of ASes. It is in some circumstances useful to define a group of routes that have something in common. This could be a spe- cial access policy to a supercomputer centre, a group of routes used for a specific mission, or a disciplinary group that is scattered among several autonomous systems. Also these communities could be useful to group routes for the purpose of network statistics. Communities do not exchange routing information, since they do not represent an autonomous system. More specifically, communities do not define routing policies, but access or usage policies. However, they can de used as in conjunction with an ASes routing policy to define a set of routes the AS sets routing policy for. Communities should be defined in a strict manner, to avoid creating as many communities as there are routes, or even worse. Communities should be defined following the two rules below; o Communities must have a global meaning. Communities that have no global meaning, are used only in a local environment and should be avoided. o Communities must not be defined to express non-local policies. It should be avoided that a community is created because some other organisation forces a policy upon your organisation. Communities must only be defined to express a policy defined by your organisation. Community examples There are some clear examples of communities: BACKBONE - all customers of a given backbone service provider even though they can have various different routing policies and hence belong to different ASes. This would be extremely useful for statistics collection. HEPNET - the High Energy Physics community partly shares infrastructure with other organisations, and the institutes it consists of are scattered all over Europe, often being part of a non HEPNET autonomous system. To allow statistics, access or part of a routing policy , a community HEPNET, consisting of all routes that are part of HEPNET, conveniently groups all these routes. ripe-1nn.txt July, 1994 - 32 - NSFNET - the National Science Foundation Network imposes an acceptable use policy on routes that wish to make use of it. A community NSFNET could imply the set of routes that comply with this pol- icy. MULTI - a large multinational corporation that does not have its own internal infrastructure, but connects to the various parts of its organisations by using local service providers that connect them all together, may decide to define a community to restrict access to their networks, only by networks that are part of this community. This way a corporate network could be defined on shared infrastructure. Also, this community could be used by any of the service providers to do statistics for the whole of the corporation, for instance to do topology or bandwidth plan- ning. Similar to Autonomous systems, each community is represented in the RIPE database by both a community object and community tags on the route objects representing the routes belonging to the community. The community object stores descriptive, administrative and contact information about the community. The community tags on the route objects define the set of routes belonging to a community. A route can have multiple community tags. The community tags can only be created and updated by the "guardian" of the community and not by those directly responsible for the par- ticular network. This ensures that guardians remain in control of community membership. Here's an example of how this might be represented in terms of the community tags within the network object. We have an example where the route 192.16.199.0/24 has a single routing policy (i.e. that of AS 1104), but is part of several different communities of interest. We use the tag "comm-list" to represent the list of communities associated with this route. NIKHEF-H uses the service provider SURFNET (a service provider with customers with more than one rout- ing policy), is also part of the High Energy Physics community as well as having the ability to access the Supercomputer at CERN(4). _________________________ (4) The community `CERN-SUPER', is somewhat national, but is intended as an example of a possible use of an access policy constraint. ripe-1nn.txt July, 1994 - 33 - Example: route: 192.16.199.0/24 descr: Local Ethernet descr: NIKHEF section H origin: AS1104 comm-list: HEPNET CERN-SUPER SURFNET changed: ripe-dbm(a)ripe.net 920604 source: RIPE In the above examples some communities have been defined. The com- munity object itself will take the following format: Example: community: SURFNET descr: Dutch academic research network authority: SURFnet B.V. guardian: comm-guardian(a)surfnet.nl admin-c: Erik-Jan Bos tech-c: Erik-Jan Bos changed: ripe-dbm(a)ripe.net 920604 source: RIPE For a complete explanation of the syntax please refer to Appendix B. ripe-1nn.txt July, 1994 - 34 - 9. Representation of Routing Policies Routing policies of an AS are represented in the autonomous system object. Initially we show some examples, so the reader is familiar with the concept of how routing information is represented, used and derived. Refer to Appendix A, for the full syntax of the "aut-num" object. The topology of routing exchanges is represented by listing how routing information is exchanged with each neighbouring AS. This is done separately for both incoming and outgoing routing information. In order to provide backup and back door paths a relative cost is associated with incoming routing information. Example 1: AS1------AS2 This specifies a simple routing exchange of two presumably isolated ASes. Even if either of them has routing information about routes in ASes other than AS1 and AS2, none of that will be announced to the other. aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 aut-num: AS2 as-out: to AS1 announce AS2 as-in: from AS1 100 accept AS1 The number 100 in the in-bound specifications is a relative cost, which is used for backup and back door routes. The absolute value is of no significance. The relation between different values within the same AS object is. A lower value means a lower cost. This is cons- ciously similar to the cost based preference scheme used with DNS MX RRs. Example 2: Now suppose that AS2 is connected to one more AS, besides AS1, and let's call that AS3: AS1------AS2------AS3 ripe-1nn.txt July, 1994 - 35 - In this case there are two reasonable routing policies: a) AS2 just wants to exchange traffic with both AS1 and AS3 itself without passing traffic between AS1 and AS3. b) AS2 is willing to pass traffic between AS3 and AS1, thus acting as a transit AS Example 2a: In the first case AS1's representation in the routing registry will remain unchanged as will be the part of AS2's representation describing the routing exchange with AS1. A description of the addi- tional routing exchange with AS3 will be added to AS2's representa- tion: aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 aut-num: AS2 as-out: to AS1 announce AS2 as-in: from AS1 100 accept AS1 as-out: to AS3 announce AS2 as-in: from AS3 100 accept AS3 aut-num: AS3 as-out: to AS2 announce AS3 as-in: from AS2 100 accept AS2 Note that in this example, AS2 keeps full control over its resources. Even if AS3 and AS1 were to allow each others routes in from AS2, the routing information would not flow because AS2 is not announcing it(5). Example 2b: If contrary to the previous case, AS1 and AS3 are supposed to have connectivity to each other via AS2, all AS objects have to change: _________________________ (5) Of course AS1 and AS3 could just send traffic to each other to AS2 even without AS2 announcing the routes, hoping that AS2 will forward it correctly. Such questionable practices however are beyond the scope of this document. ripe-1nn.txt July, 1994 - 36 - aut-num: AS1 as-out: to AS2 announce AS1 as-in: from AS2 100 accept AS2 AS3 aut-num: AS2 as-out: to AS1 announce AS2 AS3 as-in: from AS1 100 accept AS1 as-out: to AS3 announce AS2 AS1 as-in: from AS3 100 accept AS3 aut-num: AS3 as-out: to AS2 announce AS3 as-in: from AS2 100 accept AS1 AS2 Note that the amount of routing information exchanged with a neigh- bour AS is defined in terms of routes belonging to ASes. In BGP terms this is the AS where the routing information originates and the originating AS information carried in BGP could be used to implement the desired policy. However, using BGP or the BGP AS-path information is not required to implement the policies thus speci- fied. Configurations based on route lists can easily be generated from the database. The AS path information, provided by BGP can then be used as an additional checking tool as desired. The specification understands one special expression and this can be expressed as a boolean expressions: ANY - means any routing information known. For output this means that all routes an AS knows about are announced. For input it means that anything is accepted from the neighbour AS. ripe-1nn.txt July, 1994 - 37 - Example 3: AS4 is a stub customer AS, which only talks to service provider AS123. | | -----AS123------AS4 | | aut-num: AS4 as-out: to AS123 announce AS4 as-in: from AS123 100 accept ANY aut-num: AS123 as-in: from AS4 100 accept AS4 as-out: to AS4 announce ANY <further neighbours> Since AS4 has no other way to reach the outside world than AS123 it is not strictly necessary for AS123 to send routing information to AS4. AS4 can simply send all traffic for which it has no explicit routing information to AS123 by default. This strategy is called default routing. It is expressed in the routing registry by adding one or more default tags to the autonomous system which uses this strategy. In the example above this would look like: aut-num: AS4 as-out: to AS123 announce AS4 default: AS123 100 aut-num: AS123 as-in: from AS4 100 accept AS4 <further neighbours> ripe-1nn.txt July, 1994 - 38 - Example 4: AS4 now connects to a different operator, AS5. AS5 uses AS123 for outside connectivity but has itself no direct connection to AS123. AS5 traffic to and from AS123 thus has to pass AS4. AS4 agrees to act as a transit AS for this traffic. | | -----AS123------AS4-------AS5 | | aut-num: AS4 as-out: to AS123 announce AS4 AS5 as-in: from AS123 100 accept ANY as-out: to AS5 announce ANY as-in: from AS5 50 accept AS5 aut-num: AS5 as-in: from AS4 100 accept ANY as-out: to AS4 announce AS5 aut-num: AS123 as-in: from AS4 100 accept AS4 AS5 as-out: to AS4 announce ANY <further neighbours> Now AS4 has two sources of external routing information. AS5 which provides only information about its own routes and AS123 which pro- vides information about the external world. Note that AS4 accepts information about AS5 from both AS123 and AS5 although AS5 informa- tion cannot come from AS123 since AS5 is connected only via AS4 itself. The lower cost of 50 for the announcement from AS5 itself compared to 100 from AS123 ensures that AS5 is still believed even in case AS123 will unexpectedly announce AS5. In this example too, default routing can be used by AS5 much like in the previous example. AS4 can also use default routing towards AS123: ripe-1nn.txt July, 1994 - 39 - aut-num: AS4 as-out: to AS123 announce AS4 AS5 default: AS123 11 as-in: from AS5 50 accept AS5 Note no announcements to AS5, they default to us. aut-num: AS5 as-out: to AS4 announce AS5 default: AS4 100 aut-num: AS123 as-in: from AS4 100 announce AS4 AS5 <further neighbours> Note that the relative cost associated with default routing is totally separate from the relative cost associated with in-bound announcements. The default route will never be taken if an explicit route is known to the destination. Thus an explicit route can never have a higher cost than the default route. The relative cost asso- ciated with the default route is only useful in those cases where one wants to configure multiple default routes for redundancy. Note also that in this example the configuration using default routes has a subtly different behavior than the one with explicit routes: In case the AS4-AS5 link fails AS4 will send traffic to AS5 to AS123 when using the default configuration. Normally this makes not much difference as there will be no answer and thus little traffic. With certain datagram applications which do not require acknowledgments however, significant amounts of traffic may be use- lessly directed at AS123. Similarly default routing should not be used if there are stringent security policies which proscribe any traffic intended for AS5 to ever touch AS123. Generally it can be said that default routing should only be used in very simple topologies. Once the situation gets more complex using default routes can lead to unexpected results or even defeat the routing policies established when links fail. As an example consider how Example 5a) below could be implemented using default routing. ripe-1nn.txt July, 1994 - 40 - Example 5: In a different example AS4 has a private connection to AS6 which in turn is connected to the service provider AS123: | | -----AS123------AS4 | | | | | | AS6 ---------+ There are a number of policies worth examining in this case: a) AS4 and AS6 wish to exchange traffic between themselves exclusively via the private link between themselves; such traffic should never pass through the backbone (AS123). The link should never be used for transit traffic, i.e. traffic not both originating in and destined for AS4 and AS6. b) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. The link should never be used for transit traffic. c) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. Should the connection between AS4 and AS123 fail, traffic from AS4 to des- tinations behind AS123 can pass through the private link and AS6's connection to AS123. d) AS4 and AS6 wish to exchange traffic between themselves via the private link between themselves. Should the link fail, traffic between AS4 and AS6 should be routed via AS123. Should the backbone connection of either AS4 or AS6 fail, the traffic of the disconnected AS should flow via the other AS's backbone connection. ripe-1nn.txt July, 1994 - 41 - Example 5a: aut-num: AS4 as-in: from AS123 100 accept NOT AS6 as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-out: to AS6 announce AS4 aut-num: AS123 as-in: from AS4 100 accept AS4 as-out: to AS4 announce ANY as-in: from AS6 100 accept AS6 as-out: to AS6 announce ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept NOT AS4 as-out: to AS123 announce AS6 as-in: from AS4 50 accept AS4 as-out: to AS4 announce AS6 Note that here the configuration is slightly inconsistent. AS123 will announce AS6 to AS4 and AS4 to AS6. These announcements will be filtered out on the receiving end. This will implement the desired policy. Consistency checking tools might flag these cases however. ripe-1nn.txt July, 1994 - 42 - Example 5b: aut-num: AS4 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-out: AS6 AS4 aut-num: AS123 as-in: AS4 100 AS4 as-out: AS4 ANY as-in: AS6 100 AS6 as-out: AS6 ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS6 as-in: from AS4 50 accept AS4 as-out: to AS4 announce AS6 The thing to note here is that in the ideal operational case, `all links working' AS4 will receive announcements for AS6 from both AS123 and AS6 itself. In this case the announcement from AS6 will be preferred because of its lower cost and thus the private link will be used as desired. AS6 is configured as a mirror image. ripe-1nn.txt July, 1994 - 43 - Example 5c: The new feature here is that should the connection between AS4 and AS123 fail, traffic from AS4 to destinations behind AS123 can pass through the private link and AS6's connection to AS123. aut-num: AS4 as-in: from AS123 100 accept ANY as-out: to AS123 announce AS4 as-in: from AS6 50 accept AS6 as-in: from AS6 110 accept ANY as-out: to AS6 AS4 aut-num: AS123 as-in: from AS4 1 accept AS4 as-out: to AS4 announce ANY as-in: from AS6 1 accept AS6 as-in: from AS6 2 accept AS4 as-out: to AS6 announce ANY <further neighbours> aut-num: AS6 as-in: from AS123 100 accept ANY as-out: to AS123 AS6 announce AS4 as-in: from AS4 50 accept AS4 as-out: to AS4 announce ANY Note that it is important to make sure to propagate routing informa- tion for both directions in backup situations like this. Connec- tivity in just one direction is not useful at all for almost all applications. Note also that in case the AS6-AS123 connection breaks, AS6 will only be able to talk to AS4. The symmetrical case (5d) is left as an exercise to the reader. 10. Future Extensions We envision that over time the requirements for describing routing policy will evolve. The routing protocols will evolve to support the requirements and the routing policy description syntax will need to evolve as well. For that purpose, a separate document will describe experimental syntax definitions for policy description. This docu- ment will be updated when new objects or attributes are proposed or modified. Two new attributes of the AS object which are proposed and supported by the Merit Routing Registry are as-transit and db-selector. as-transit describes the transit preferences of an AS. It allows an AS to describe its path preference in order to reach certain ripe-1nn.txt July, 1994 - 44 - destinations. The AS(s) specified in the path preference may or may not be an immediate neighbor of the AS defined in the AS object. as-transit accommodates policy decisions involving AS path whereas as-in and as-out do not. It is not unusual for ASs to have routing policies which involve path selection based on AS. Emerging proto- cols like SDRP [13] will allow an AS to choose a path independent of a neighboring ASs path choice. as-transit permits descriptions based on AS path selection. The DataBase Selector (db-selector) function allows one to take advantage of information registered in other Registries. It permits the selection of networks in a database based on their attributes. It is proposed to be used within the as-in/as-out attribute family to make the description of policy concise. For example, if an AS has the policy of not accepting any routes from country XYZ, the AS can use the db-selector to check a database which has a network and country attribute and relate that information to the information in the routing registry. The advantage of referencing another database is that the routing registry will avoid duplicating the information maintained in other information registries. Detailed examples and syntax are described in document ???? [14]. ripe-1nn.txt July, 1994 - 45 - 11. References [1] Bates, T., Jouanigot, J-M., Karrenberg, D., Lothberg, P., Terpstra, M., "Representation of IP Routing Policies in the RIPE Database", RIPE-81, February 1993. [2] Merit Network Inc.,"Representation of Complex Routing Policies of an Autonomous System", DRAFT, March, 1994. [3] PRIDE Tools Release 1. See ftp.ripe.net:pride/tools/pride-tools-1.tar.Z. [4] Merit Inc. RRDB Tools. See rrdb.merit.edu:pub/meritrr/* [5] The Network List Compiler. See dxcoms.cern.ch:pub/ripe-routing-wg/nlc-2.2d.tar [6] Lord, A., Terpstra, M., "RIPE Database Template for Networks and Persons", DRAFT, May 1994. [7] Karrenberg, D., "RIPE Database Template for Domains", RIPE-49, April 1992. [8] Lougheed, K., Rekhter, Y., "A Border Gateway Protocol 3 (BGP- 3)", RFC1267, October 1991. [9] Rekhter, Y., Li, T., "A Border Gateway Protocol 4 (BGP-4)", RFC-1654, May 1994. [10] Bates, T., Karrenberg, D., Terpstra, M., "Support for Classless Internet Addresses in the RIPE Database", DRAFT, May 1994. [11] Karrenberg, D., "Authorisation and Notification of Changes in the RIPE Database", RIPE-96, October 1993. [12] Bates, T., "Support of Guarded fields within the RIPE Data- base", ripe-108, February 1994. [13] Estrin, D., Li, T., Rekhter, Y., Varadhan, K., "Source Demand Routing: Packet Format and Forwarding Specification (Version 1)", INTERNET-DRAFT, draft-ietf-sdr-sdrp-04.txt, March 1994. [14] ?????, "Experimental Objects and attributes for the Routing Registry, ???, ????. [15] Bates, T., "Specifying an `Internet Router' in the Routing Registry", DRAFT, July 1994. ripe-1nn.txt July, 1994 - 46 - 12. Author's Addresses Tony Bates RARE/PRIDE Project c/o RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5064 T.Bates(a)ripe.net Elise Gerich The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2120 epg(a)merit.edu Laurent Joncheray The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2065 lpj(a)merit.edu Jean-Michel Jouanigot CERN, European Laboratory for Particle Physics CH-1211 Geneva 23 Switzerland +41 22 767 4417 Jean-Michel.Jouanigot(a)cern.ch Daniel Karrenberg RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5065 D.Karrenberg(a)ripe.net ripe-1nn.txt July, 1994 - 47 - Marten Terpstra PRIDE Project c/o RIPE Network Coordination Centre Kruislaan 409 NL-1098 SJ Amsterdam The Netherlands +31 20 592 5064 M.Terpstra(a)ripe.net Jessica Yu The University of Michigan Merit Computer Network 1075 Beal Avenue Ann Arbor, MI 48109 USA +1 313 936 2655 jyy(a)merit.edu ripe-1nn.txt July, 1994 - 48 - Appendix A - Syntax for the aut-num object. Here is a summary of the tags associated with aut-num object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the aut-num object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. aut-num: [mandatory] [single] descr: [mandatory] [multiple] as-in: [optional] [multiple] as-out: [optional] [multiple] interas-in: [optional] [multiple] interas-out: [optional] [multiple] as-exclude: [optional] [multiple] default: [optional] [multiple] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] guardian: [mandatory] [single] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: aut-num: The autonomous system number. This must be a uniquely allo- cated autonomous system number from an AS registry (i.e. the RIPE NCC, the Inter-NIC, etc). Format: AS<positive integer between 1 and 65535> Example: aut-num: AS1104 Status: mandatory, only one line allowed descr: A short description of the Autonomous System. Format: free text Status: mandatory, multiple lines allowed as-in: ripe-1nn.txt July, 1994 - 49 - Example: descr: NIKHEF section H descr: Science Park Watergraafsmeer descr: Amsterdam A description of accepted routing information between AS peers. Format: from <aut-num> <cost> accept <routing policy expression> The keywords from and accept are optional and can be omit- ted. <aut-num> refers to your AS neighbour. <cost> is a positive integer used to express a relative cost of routes learned. The lower the cost the more pre- ferred the route. <routing policy expression> can take the following for- mats. 1. A list of one or more ASes, AS Macros, Communities or Network Lists. A Network List is a list of network numbers in prefix length format, separated by commas, and surrounded by curly brackets. Examples: as-in: from AS1103 100 accept AS1103 as-in: from AS786 105 accept AS1103 as-in: from AS786 10 accept AS786 HEPNET as-in: from AS1755 110 accept AS1103 AS786 as-in: from AS3333 100 accept {192.87.45.0/16, 128.141.0.0/16} 2. A set of KEYWORDS. The following KEYWORD is currently defined: ANY this means anything the neighbour AS knows. 3. A logical expression of either 1 or 2 above The current logical operators are defined as: AND OR NOT ripe-1nn.txt July, 1994 - 50 - NOTE: if no logical operator is given between ASes, AS-macros, Communities, Network Lists and KEYWORDS it is implicitly evaluated as an `OR' operation. The OR can be left out for conciseness. Rules are grouped together using parenthesis i.e "(" and ")". Example: as-in: from AS1755 100 accept ANY AND NOT (AS1234 OR AS513) as-in: from AS1755 150 accept AS1234 OR {35.0.0.0/8} A rule can be wrapped over lines providing the associated <aut-num>, <cost> values and from and accept keywords are repeated and occur on con- secutive lines. Example: as-in: from AS1755 100 accept ANY AND NOT (AS1234 AS513) and as-in: from AS1755 100 accept ANY AND NOT ( as-in: from AS1755 100 accept AS1234 AS513) are evaluated to the same result. Please note that the ordering of these continuing lines matters. Status: optional, multiple lines allowed as-out: A description of generated routing information sent to other AS peers. Format: to <aut-num> announce <routing policy expression The to and announce keywords are optional and can be omit- ted. <aut-num> refers to your AS neighbour. <routing policy expression> is explained in the as-in attribute definition above. Example: as-out: to AS1104 announce AS978 as-out: to AS1755 announce ANY as-out: to AS786 announce ANY AND NOT (AS978) Status: optional, multiple lines allowed ripe-1nn.txt July, 1994 - 51 - interas-in: Describes incoming local preferences on an inter AS connection. Format: from <aut-num> <local-info> <pref> accept <routing policy expression> The keywords from and accept are optional and can be omit- ted. <aut-num> is an autonomous system as defined in as-in. <local-info> contains the IP address of the local border router, followed by a space, followed by the IP address of the remote border router. IP addresses must be in prefix length format. <pref> is defined as follows: (pref-type=<value>) It should be noted the parenthesis ``('' and ``)'' and the ``pref-type'' keyword must be present for this preference to be valid. <value> can take one of the following values: <cost> <cost> is a positive integer used to express a rela- tive cost of routes learned. The lower the cost the more preferred the route. This <cost> value is only relevant to other interas-in attributes, not to as-in attributes. MED This indicates the AS will use the BGP MED metric sent from its neighbour AS. NOTE: Combinations of MED and <cost> should be avoided for the same destinations. CAVEAT: The pref-type values may well be enhanced in the future as more inter-ASs routing protocols intro- duce other metrics. <routing policy expression> is an expression as defined in as-in above. Examples: interas-in: from AS1104 192.87.45.254/32 192.87.45.80/32 (pref-type=10) accept AS786 AS987 interas-in: from AS1104 192.87.45.254/32 192.87.45.79/32 (pref-type=20) accept AS987 interas-in: from AS1103 192.87.45.254/32 192.87.45.32/32 (pref-type=MED) accept ANY Status: optional, multiple lines allowed ripe-1nn.txt July, 1994 - 52 - interas-out: Format: to <aut-num> <local-info> announce <metric> <routing pol- icy expression> The keywords to and announce are optional and can be omit- ted. The definitions of <aut-num>, <local-info>, and <routing policy expression> are identical to those defined in interas-in. <metric> is defined as follows: (metric-out=<value>) It should be noted the parenthesis ``('' and ``)'' and the ``metric-out'' keyword must be present for this metric to be valid. <value> can take one of the following values: <num-metric> <num-metric> is a pre-configured metric for outbound routes. The lower the cost the more preferred the route. This <num-metric> value is only relevant to other interas-out attributes, not to as-out attri- butes. IGP This indicates that this means that the metric reflects the ASs internal topology cost. The topology is reflected here by using MED which is derived from the AS's IGP metric. NOTE: Combinations of IGP and <num-metric> should be avoided for the same destinations. CAVEAT: The metric-out values may well be enhanced in the future as more interas protocols make use of metrics. Examples: interas-out: to AS1104 192.87.45.254/32 192.87.45.80/32 (metric-out=10) announce AS23 AS10 interas-out: to AS1104 192.87.45.254/32 192.87.45.79/32 (metric-out=15) announce AS10 interas-out: to AS1103 192.87.45.254/32 192.87.45.79/32 (metric-out=IGP) announce ANY Status: optional, multiple lines allowed as-exclude: A list of transit ASes to ignore all routes from. ripe-1nn.txt July, 1994 - 53 - Format: exclude <aut-num> to <exclude-route-keyword> Keywords exclude and to are optional and can again be omitted. <aut-num> refers to the transit AS in question. an <exclude-route-keyword> can be ONE of the following. 1. <aut-num> 2. AS macro 3. Community 4. ANY Examples: as-exclude: exclude AS690 to HEPNET This means exclude any HEPNET routes which have a route via AS690. as-exclude: exclude AS1800 to AS-EUNET This means exclude any AS-EUNET routes which have a route via AS1800. as-exclude: exclude AS1755 to AS1104 This means exclude any AS1104 route which have a route via AS1755. as-exclude: exclude AS1104 to ANY This means exclude all routes which have a route via AS1104. Status: optional, multiple lines allowed default: An indication of how default routing is done. Format: <aut-num> <relative cost> <default-expression> where <aut-num> is the AS peer you will default route to, and <relative cost> is the relative cost is a positive integer used to express a preference for default. There is no relationship to the cost used in the as-in tag. The AS peer with the lowest cost is used for default over ones ripe-1nn.txt July, 1994 - 54 - with higher costs. <default-expression> is optional and provides information on how a default route is selected. It can take the fol- lowing formats: 1. static. This indicates that a default is statically configured to this AS peer. 2. A network list with the syntax as described in the as-in attribute. This indicates that this list of routes is used to generate a default route. A special but valid value in this is the special route used by some routing protocols to indicate default: 0.0.0.0/0 3. default. This is the same as {0.0.0.0/0}. This means that the routing protocol between these two peers generates a true default. Examples: default: AS1755 10 default: AS786 5 {140.222.0.0/16, 192.87.45.0/24} default: AS2043 15 default Status: optional, multiple lines allowed tech-c: Full name or uniquely assigned NIC-handle of a technical con- tact person. This is someone to be contacted for technical problems such as misconfiguration. Format: <firstname> <initials> <lastname> or <nic-handle> Example: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Example: admin-c: Joe T Bloggs admin-c: JTB1 ripe-1nn.txt July, 1994 - 55 - Status: mandatory, multiple lines allowed guardian: Mailbox of the guardian of the Autonomous system. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: as1104-guardian(a)nikhef.nl Status: mandatory, only one line and e-mail address allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Multihomed AS talking to AS1755 and AS786 remarks: Will soon connect to AS1104 also. Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be sent. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> ripe-1nn.txt July, 1994 - 56 - Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 57 - Appendix B - Syntax details for the community object. Here is a summary of the tags associated with community object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the commun- ity object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. community: [mandatory] [single] descr: [mandatory] [multiple] authority: [mandatory] [single] guardian: [mandatory] [single] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: community: Name of the community. The name of the community should be descriptive of the community it describes. Format: Upper case text string which cannot start with "AS" or any of the <routing policy expression> KEYWORDS. See Appendix A. Example: community: WCW Status: mandatory, only one line allowed descr: A short description of the community represented. Format: free text Example: descr: Science Park Watergraafsmeer descr: Amsterdam Status: mandatory, multiple lines allowed ripe-1nn.txt July, 1994 - 58 - authority: The formal authority for this community. This could be an organisation, institute, committee, etc. Format: free text Example: authority: WCW LAN Committee Status: mandatory, only one line allowed guardian: Mailbox of the guardian of the community. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: wcw-guardian(a)nikhef.nl Status: mandatory, only one line and email address allowed tech-c: Full name or uniquely assigned NIC-handle of an technical con- tact person for this community. Format: <firstname> <initials> <lastname> or <nic-handle> Example: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Example: admin-c: Joe T Bloggs admin-c: JTB1 ripe-1nn.txt July, 1994 - 59 - Status: mandatory, multiple lines allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Temporary community remarks: Will be removed after split into ASes Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. ripe-1nn.txt July, 1994 - 60 - Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 61 - Appendix C - AS Macros syntax definition. Here is a summary of the tags associated with as-macro object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the as-macro object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. as-macro: [mandatory] [single] descr: [mandatory] [multiple] as-list: [mandatory] [multiple] guardian: [mandatory] [single] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: as-macro: The name of a macro containing at least two Autonomous Systems grouped together for ease of administration. Format: AS-<string> The <string> should be in upper case and not contain any special characters. Example: as-macro: AS-EBONE Status: mandatory, only one line allowed descr: A short description of the Autonomous System Macro. Format: free text Example: descr: Macro for EBONE connected ASes Status: mandatory, multiple lines allowed ripe-1nn.txt July, 1994 - 62 - as-list: The list of ASes that make up this macro. Format: <aut-num> <aut-num> ... See Appendix A for <aut-num> definition. Example: as-list: AS786 AS513 AS1104 Status: mandatory, multiple lines allowed guardian: Mailbox of the guardian of this AS macro. Format: <email-address> The <email-address> should be in RFC822 domain format wherever possible. Example: guardian: as-ebone-guardian(a)ebone.net Status: mandatory, only one line and e-mail address allowed tech-c: Full name or uniquely assigned NIC-handle of a technical con- tact person for this macro. This is someone to be contacted for technical problems such as misconfiguration. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. In many cases this would be the name of the guardian. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: ripe-1nn.txt July, 1994 - 63 - admin-c: Joe T Bloggs admin-c: JTB1 Status: mandatory, multiple lines allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: AS321 will be removed from this Macro shortly Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD ripe-1nn.txt July, 1994 - 64 - <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 65 - Appendix D - Syntax for the "route" object. There is a summary of the tags associated with community object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the commun- ity object, and the third column whether this specific attribute can occur only once per object [single], or more than once [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. See [6] the example for the descr: attribute. route: [mandatory] [single] descr: [mandatory] [multiple] origin: [mandatory] [single] hole: [optional] [multiple] withdrawn: [optional] [multiple] comm-list: [optional] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: route: Route being announced. Format: Classless representation of a route with the RIPE database known as the "prefix length" representation. See [10] for more details on classless representations. Examples: route: 192.87.45.0/24 This represents addressable bits 192.87.45.0 to 192.87.45.255. route: 192.1.128.0/17 This represents addressable bits 192.1.128.0 to 192.1.255.255. Status: mandatory, only one line allowed origin: The autonomous system announcing this route. Format: <aut-num> ripe-1nn.txt July, 1994 - 66 - See appendix A for <aut-num> syntax. Example: origin: AS1104 Status: mandatory, only one line allowed hole: Denote the parts of the address space covered this route object to which the originator does not provide connectivity. Format: Classless representation of a route with the RIPE database known as the "prefix length" representation. See [10] for more details on classless representations. It should be noted that is sub-aggregate must be a component of that registered in the route object. Example: hole: 193.0.4.0/24 Status: optional, multiple lines allowed withdrawn: Used to denote the day this route has been withdrawn from the Internet routing mesh. It should be noted that this date cannot be in the future. Format: YYMMDD YYMMDD denotes the date this route was withdrawn. Example: withdrawn: 940711 Status: optional, multiple lines allowed comm-list: List of one or more communities this route is part of. Format: <community> <community> ... See Appendix B for <community> definition. Example: comm-list: HEP LEP Status: optional, multiple lines allowed ripe-1nn.txt July, 1994 - 67 - remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: Multihomed AS talking to AS1755 and AS786 remarks: Will soon connect to AS1104 also. Status: optional, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. See also [11]. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. See also [11]. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: ripe-1nn.txt July, 1994 - 68 - changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-1nn.txt July, 1994 - 69 - Appendix E - List of reserved words The following list of words are reserved for use within the attri- butes of the AS object. The use of these words is solely for the purpose of clarity. All keywords must be lower case. accept announce exclude from to transit Examples of the usage of the reserved words are: as-in: from neighborAS accept route as-out: to neighborAS announce route as-exclude: exclude ASpath to destination as-transit: transit ASpath to destination default: from neighborAS accept route default: to neighborAS announce route Note: that as-transit is an experimental attribute. See section 10. ripe-1nn.txt July, 1994 - 70 - Appendix F - Motivations for RIPE-81++ This appendix gives motivations for the major changes in this propo- sal from ripe-81. (It is not complete yet). The main goals of the routing registry rework are: SPLIT Separate the allocation and routing registry functions into different database objects. This will facilitate data manage- ment if the Internet registry and routing registry functions are separated (like in other parts of the world). It will also make more clear what is part of the routing registry and who has authority to change allocation vs. routing data. CIDR Add the possibility to specify classless routes in the routing registry. Classless routes are being used in Internet produc- tion now. Aggregation information in the routing registry is necessary for network layer troubleshooting. It is also neces- sary because aggregation influences routing policies directly. CALLOC Add the possibility to allocate address space on classless boundaries in the allocation registry. This is a way to preserve address space. CLEAN To clean up some of the obsolete and unused parts of the rout- ing registry. The major changes are now discussed in turn: Introduce Classless Addresses CIDR, CALLOC Introduce route object. SPLIT, CIDR and CALLOC. Delete obsolete attributes from inetnum. CLEAN. ripe-1nn.txt July, 1994 - 71 - Delete RIPE-DB and LOCAL from routing policy expressions. CLEAN Allow multiple ASes to originate the same route Because it is being done. CIDR. Made possible by SPLIT. ripe-1nn.txt July, 1994 - 72 - Appendix G - Transition strategy from RIPE-81 to RIPE-81++ Transition from the routing registry described by ripe-81 to the routing registry described in this document is a straightforward process once the new registry functions have been implemented in the database software and are understood by the most commonly used registry tools. The routing related attributes in the classful inet- num objects of ripe-81 can be directly translated into new routing objects. Then these attributes can be deleted from the inetnum object making that object conform to the new schema. Proposed transition steps: 1) Implement classless addresses and new object definition in the database software. 2) Make common tools understand the new schema and prefer it if both old and new are present. 3) Invite everyone to convert their data to the new format. This can be encouraged by doing conversions automatically and pro- posing them to maintainers. 4) At a flag day remove all remaining routing information from the inetnum objects. Before the flag day all usage of obsoleted inetnum attributes has to cease and all other routing registry functions have to be taken over by the new objects and attri- butes. The current estimate is that point three can be reached in the Sum- mer 1994 if the draft is accepted by mid-June. The flag day should be scheduled 3-4 months after this point. ripe-1nn.txt July, 1994

1 0

Re: Latest and hopefully last iteration of ripe-81++
by Dale S. Johnson 21 Jul '94

21 Jul '94

> > bonito(a)nis.garr.it (Antonio_Blasco Bonito) writes: > * > > Firstly, > this is just my opinion.. it is up to the working group chairs > to decide any new extensions here. I am just `trying' to complete the > action for ripe-81++ from the last meeting. The points you raise are > more general (esp. the time related one). However, find below my > personal view on this. > > * > Ok, here are my last comments again (seens that last time they > * > went directly to /dev/null). I won't accept a document which does not > * > allow more than 1 update of an object per day. > * > Laurent > * > > * > A few things i'd like to propose: > * > > * > - A route/AS name attribute. You currently use the first line of the 'des > * c' > * > attribute to generate a name (with prtraceroute for instance). Having > * > a separate name attribute can make the query of the server (whois or what > * ever) > * > easier since it doesn't require any parsing. > * > * I strongly agree. > * > Umm... do not see the need for routes to have names - doesn't effect > prtraceroute or any other tool for that matter. Whats to parse in > description ? It is there in the aut-num object so a tool uses it..and > works as far as I can tell ? > > However, if the groups want this fine by me. Just I didn't hear any > other votes for this until now. I'd vote for routes having names. I think the arguments for this are essentially the same as in the discussion a couple of years ago about whether nets needed names (or, more precisely, whether net names needed to be unique). When working on routing problems, Routes will be the entities that are looked at during the analysis like nets have been in the past. Giving the tools the ability to put up even a slightly descriptive name provides a lot of sanity checking. It also gives a pronouncable verbal shorthand for human communication ("Hey, has that JvNC AGG-one come back up yet?") --Dale

1 0

The router object
by Tony Bates 21 Jul '94

21 Jul '94

Please find below a draft of a proposal for a router object known as ``inet-rtr''. This is the missing link of the current ripe-81++ specifically for the ias-int information which was rightly removed along with the component attribute iself. This proposal is really a modification of a similar proposal made by Merit with just one or two clarifications and all credit belongs to them. This object could very quickly added to the Database. Please let me have comments asap. --Tony. Please note: a postscript version is available as ftp://ftp.ripe.net/ripe/drafts/inet-rtr.ps Specifying an `Internet Router' in the Routing Registry Tony Bates DRAFT - DRAFT - DRAFT Document ID: ripe-xy ABSTRACT This paper describes a simple specification for defining an Internet router within a routing registry. 1. Introduction It has become apparent as routing registries are evolving that there is a need to register some details of an Internet router (1) within the routing registry. By adding this kind of detailed information it adds functionality to information based on routing policies [1] facilitating the ability to build operational tools [2],[3] such as configuration generators and diagnostic tools within increased local information. It also provides a direct method to find a contact for an important component of the Internet infrastructure. This can be extremely useful when resolving operational problems. 2. Acknowledgments This specification is based on a similar specification by Merit Inc. for a `route' object (2). All credit should go to them. This paper acts purely to clarify the original ideas set out in the Merit paper. _________________________ (1) Here an Internet router means any IP [4] node ca- pable of running an IP routing protocol. Be that RIP, BGP or any other of the current IP based routing proto- cols found in the Internet today. This definition is intentionally looser than what might be found in the "Router requirements" Internet draft [5]. (2) This specification does not use `router' as the object name to avoid possible clashes with the `route' object which already exists within the routing regis- try. ripe-xy.txt July, 1994 - 2 - 3. Router Representation The representation must be capable of representing both ``interior'' and ``border'' routers within ones own autonomous system. Each object is uniquely identified by its object name. Here is a simple example of a router object: inet-rtr: Amsterdam.ripe.net localas: AS3333 ifaddr: 192.87.45.190 ifaddr: 192.87.4.28 ifaddr: 193.0.0.222 peer: 192.87.45.6 AS2122 BGP4 peer: 193.0.0.219 AS2122 BGP peer: 193.0.0.221 AS1104 BGP peer: 192.87.4.18 AS1103 BGP4 peer: 192.87.4.24 AS1103 BGP4 peer: 192.87.4.20 AS286 BGP4 peer: 192.87.4.5 AS3333 IBGP4 admin-c: Daniel Karrenberg tech-c: Tony Bates tech-c: Marten Terpstra notify: ops(a)ripe.net remarks: The router for the RIPE NCC changed: tony(a)ripe.net 940720 source: RIPE This object provides several key pieces of information. The exact syntax for each attribute is discussed in the next section. However, some general remarks about this example are worthy of note. From this you can see immediately that this router "Amsterdam.ripe.net" is in the autonomous system 3333 and has three configured inter- faces. You also see that it has several exterior peers and one inte- rior peer (192.87.45.6). Details of the actual routing protocol are given. This can be extremely useful. For example a BGP3 router is not CIDR [6] capable whereas a BGP4 capable router is. A tool could use this information when examining routing policy to see if a peer can make use of aggregation. Finally, we also see who we can con- tact when problems occur with this router. ripe-xy.txt July, 1994 - 3 - 4. `inet-rtr' Syntax Definition Here is a summary of the tags associated with inet-rtr object itself and their status. The first column specifies the attribute, the second column whether this attribute is mandatory in the inet-rtr object, and the third column whether this specific attribute can occur only once per object [single], or one or more [multiple]. When specifying multiple lines per attribute, the attribute name must be repeated. inet-rtr: [mandatory] [single] localas: [mandatory] [single] ifaddr: [mandatory] [multiple] peer: [optional] [multiple] tech-c: [mandatory] [multiple] admin-c: [mandatory] [multiple] remarks: [optional] [multiple] notify: [optional] [multiple] maintainer: [optional] [single] changed: [mandatory] [multiple] source: [mandatory] [single] Each attribute has the following syntax: inet-rtr: The fully qualified domain name of the router. Format: Fully qualified domain name without trailing "." (dot). This must be registered in the DNS. For routers with more than one DNS you should pick the one that seems most suit- able. It should be noted that it is commonly general prac- tice for a router to have single uniquely defined domain name. Example: inet-rtr: Amsterdam.ripe.net Status: mandatory, only one line allowed localas: The autonomous system in which this router belongs. Format: AS<positive integer between 1 and 65535> Example: localas: AS3333 Status: mandatory, only one line allowed ripe-xy.txt July, 1994 - 4 - ifaddr: An interface address within the router. Format: <Interface Address> [Local AS] <Interface Address> must be a "dotted-quad" represented host address. It should be noted that at ONE ifaddr must be configured for the inet-rtr object to be valid. This facilitates the registering of route servers which may only have one interface address and are purely routing engines. [Local AS] is an optional piece of information which allows this interface to be configured as being in a DIF- FERENT autonomous system. This is useful only when a router is configured to `fake' that it is another AS. The format of [Local AS] is AS<positive integer between 1 and 65535>. Examples: ifaddr: 192.87.45.190 ifaddr: 192.87.4.99 AS1755 Status: mandatory, multiple lines allowed peer: Details of any router peerings. These can be both interior or exterior. Format: <Peer address> <Peer AS> <Routing Protocol> <Peer address> is the interface address of the remote peer. This is same format as that used in the ``ifaddr'' attribute above. <Peer AS> is the autonomous system number of the peer. Its format is AS<positive integer between 1 and 65535>. It should be noted that even interior peers should have their <Peer AS> detailed. <Routing Protocol> represents the routing protocol running between the router and the peer. This can be any one of the following reserved routing protocol keywords: EGP The routers are using the exterior gateway protocol, EGP [7]. BGP The routers are using the exterior gateway protocol, BGP conforming to [8]. This can mean either BGP ripe-xy.txt July, 1994 - 5 - version 2 or BGP version 3. BGP4 The routers are using the exterior gateway protocol, BGP conforming to BGP version 4 [9]. IBGP The routers are using the exterior gateway protocol, BGP as an interior routing protocol conforming to [8]. This can mean either BGP version 2 or BGP ver- sion 3. IBGP4 The routers are using the exterior gateway protocol, BGP as an interior routing protocol conforming to BGP version 4 [9]. IDRP The routers are using the exterior gateway protocol, IDRP conforming to [10]. IGP This is an interior peering using a standard interior gateway protocol (i.e. RIP, OSPF, etc.). OTHER This peering is using a protocol not in one of the categories above. Example: peer: 192.87.45.6 AS2122 BGP4 peer: 193.0.0.219 AS2122 BGP peer: 193.0.0.221 AS1104 BGP peer: 192.87.4.18 AS1103 BGP4 peer: 192.87.4.24 AS1103 BGP4 peer: 192.87.4.20 AS286 BGP4 peer: 192.87.4.5 AS3333 IBGP4 Status: optional, multiple lines allowed admin-c: Full name or uniquely assigned NIC-handle of an administrative contact person. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: admin-c: Joe T Bloggs admin-c: JTB1 Status: mandatory, multiple lines allowed ripe-xy.txt July, 1994 - 6 - tech-c: Full name or uniquely assigned NIC-handle of a technical con- tact person for this macro. This is someone to be contacted for technical problems such as misconfiguration. Format: <firstname> <initials> <lastname> or <nic-handle> Examples: tech-c: John E Doe tech-c: JED31 Status: mandatory, multiple lines allowed notify: The notify attribute contains an email address to which notifi- cations of changes to this object should be send. Format: <email-address> The <email-address> should be in RFC822 domain syntax wherever possible. Example: notify: Marten.Terpstra(a)ripe.net Status: optional, multiple lines allowed maintainer: The maintainer attribute contains a registered maintainer name. Format: <registered maintainer name> Example: maintainer: RIPE-DBM Status: optional, multiple lines allowed remarks: Remarks/comments, to be used only for clarification. Format: free text Example: remarks: This is a router ripe-xy.txt July, 1994 - 7 - Status: optional, multiple lines allowed changed: Who changed this object last, and when was this change made. Format: <email-address> YYMMDD <email-address> should be the address of the person who made the last change. YYMMDD denotes the date this change was made. Example: changed: johndoe(a)terabit-labs.nn 900401 Status: mandatory, multiple lines allowed source: Source of the information. This is used to separate information from different sources kept by the same database software. For RIPE database entries the value is fixed to RIPE. Format: RIPE Status: mandatory, only one line allowed ripe-xy.txt July, 1994 - 8 - 5. References [1] Bates, T., Gerich, E., Joncheray, L., Joanigot, J-M, Karren- berg, D., Terpstra, M, Yu, J., ripe-81++, July 1994. WORK IN PROGRESS [2] PRIDE Tools Release 1. See ftp.ripe.net:pride/tools/pride-tools-1.tar.Z. [3] Merit Inc. RRDB Tools. See rrdb.merit.edu:pub/meritrr/* [4] J. Postel, "Internet Protocol", RFC 791, January 1981. [5] Kastenholz, F., draft-ietf-rreq-iprouters-require-01.txt, April, 1994, INTERNET DRAFT [6] V. Fuller, T. Li, J. Yu, K. Varadhan, "Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Stra- tegy", RFC1519, Sep., 1993. [7] Mills, D., "Exterior Gateway Protocol formal specification", RFC904, April 1984. [8] K. Lougheed, Y. Rekhter, "A Border Gateway Protocol 3 (BGP-3)", RFC1267, October 1991. [9] Y. Rekhter, T. Li, "A Border Gateway Protocol 4 (BGP-4)", <draft-ietf-bgp-bgp4-10.txt>, INTERNET DRAFT, May, 1994. [10] C. Kunzinger, "ISO/IEC 10747 - Protocol for the Exchange of Inter-Domain Routing Information among Intermediate Systems to Support Forwarding of ISO 8473 PDUs", <draft-kunzinger-idrp- ISO10747-00.txt>, INTERNET DRAFT, April 1994. ripe-xy.txt July, 1994

2 7