Hi Thomas, Joe, On RRC08, we could not get enough peers and that makes the route collector less functional. Because of that, we are thinking to relocate RRC08 at PAIX. We hope that would give us a chance to get more peers and better view there. Peter Losher will help us to move the box from MAE-West to PAIX. We are hoping to do those changes early September. I would like to thank you all your help for hosting RRC08 at MAE-West. Kind regards. Arife
Hi Tom & Joe... When would be the best time to pick up this hardware? (Thursday or Friday?) Best Wishes - Peter On Friday 20 August 2004 06:05 am, Arife Vural wrote:
Hi Thomas, Joe,
On RRC08, we could not get enough peers and that makes the route collector less functional. Because of that, we are thinking to relocate RRC08 at PAIX. We hope that would give us a chance to get more peers and better view there.
Peter Losher will help us to move the box from MAE-West to PAIX. We are hoping to do those changes early September.
I would like to thank you all your help for hosting RRC08 at MAE-West.
Kind regards. Arife
-- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Have peers been notified yet? Cheers, Matthew
-----Original Message----- From: ris-int-admin@ripe.net [mailto:ris-int-admin@ripe.net] On Behalf Of Peter Losher Sent: 25 August 2004 02:20 To: Arife Vural Cc: Thomas.Bechly@mci.com; joe.pucik@mci.com; ris-int@ripe.net Subject: [ris-int] Re: RIS box @ MAE-West
Hi Tom & Joe...
When would be the best time to pick up this hardware? (Thursday or Friday?)
Best Wishes - Peter
On Friday 20 August 2004 06:05 am, Arife Vural wrote:
Hi Thomas, Joe,
On RRC08, we could not get enough peers and that makes the route collector less functional. Because of that, we are thinking to relocate RRC08 at PAIX. We hope that would give us a chance to get more peers and better view there.
Peter Losher will help us to move the box from MAE-West to PAIX. We are hoping to do those changes early September.
I would like to thank you all your help for hosting RRC08 at MAE-West.
Kind regards. Arife
-- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Hi guys,
When would be the best time to pick up this hardware? (Thursday or Friday?)
Could you let me know when you will disconnect RRC08? I like to send an e-mail to our peers at MAE-West about the change. Kind regards. Arife
Best Wishes - Peter
On Friday 20 August 2004 06:05 am, Arife Vural wrote:
Hi Thomas, Joe,
On RRC08, we could not get enough peers and that makes the route collector less functional. Because of that, we are thinking to relocate RRC08 at PAIX. We hope that would give us a chance to get more peers and better view there.
Peter Losher will help us to move the box from MAE-West to PAIX. We are hoping to do those changes early September.
I would like to thank you all your help for hosting RRC08 at MAE-West.
Kind regards. Arife
-- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Hi Arife, Either Thursday or Friday is fine. I can be the contact for access. They can call me first to coordinate. Please provide an equipment list of what needs to be picked up. When do you want me to disconnect the equipment? Regards, Joe Pucik MCI, MAE Engineering 408-975-2249 AIM: joevpucik -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Monday, August 30, 2004 4:14 AM To: Peter Losher Cc: Thomas.Bechly@mci.com; joe.pucik@mci.com; ris-int@ripe.net Subject: Re: [ris-int] Re: RIS box @ MAE-West Hi guys,
When would be the best time to pick up this hardware? (Thursday or Friday?)
Could you let me know when you will disconnect RRC08? I like to send an e-mail to our peers at MAE-West about the change. Kind regards. Arife
Best Wishes - Peter
On Friday 20 August 2004 06:05 am, Arife Vural wrote:
Hi Thomas, Joe,
On RRC08, we could not get enough peers and that makes the
route collector
less functional. Because of that, we are thinking to relocate RRC08 at PAIX. We hope that would give us a chance to get more peers and better view there.
Peter Losher will help us to move the box from MAE-West to PAIX. We are hoping to do those changes early September.
I would like to thank you all your help for hosting RRC08 at MAE-West.
Kind regards. Arife
-- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Either Thursday or Friday is fine. I can be the contact for access. They can call me first to coordinate.
Both days are fine with me. Let's see any of those days are OK with Peter.
Please provide an equipment list of what needs to be picked up.
Only box itself. No keyboard, no screen. Arife
Arife In that case let's decom the RIS equip early Thursday morning here. Say 8AM Pacific which is 17:00 GMT (I think... :)). Joe -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Monday, August 30, 2004 8:43 AM To: Joe Pucik Cc: 'Peter Losher'; Thomas.Bechly@mci.com; ris-int@ripe.net; David Stephens Subject: Re: [ris-int] Re: RIS box @ MAE-West
Either Thursday or Friday is fine. I can be the contact for access. They can call me first to coordinate.
Both days are fine with me. Let's see any of those days are OK with Peter.
Please provide an equipment list of what needs to be picked up.
Only box itself. No keyboard, no screen. Arife
On Monday 30 August 2004 08:52 am, Joe Pucik wrote:
In that case let's decom the RIS equip early Thursday morning here. Say 8AM Pacific which is 17:00 GMT (I think... :)).
The problem is traffic will be horrible going down the peninsula at that part of the morning (I would be coming southbound from Redwood City and 8am Pacific is the middle of morning rush hour here) Arife - How about shutting down the box sometime before you head off for the weekend on Friday, and I'll pull the shutdown box at around 1pm Pacific, and it will be ready for you later that day (Saturday morning in Europe) at the new location. (or do you need a shorter window for downtime?) -Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Ho Joe, Peter,
In that case let's decom the RIS equip early Thursday morning here. Say 8AM Pacific which is 17:00 GMT (I think... :)).
The problem is traffic will be horrible going down the peninsula at that part of the morning (I would be coming southbound from Redwood City and 8am Pacific is the middle of morning rush hour here)
Arife - How about shutting down the box sometime before you head off for the weekend on Friday, and I'll pull the shutdown box at around 1pm Pacific, and it will be ready for you later that day (Saturday morning in Europe) at the new location. (or do you need a shorter window for downtime?)
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys. BTW, Peter, until now I have not got any IP config info from Paul Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box. Arife
-Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
On Tuesday 31 August 2004 01:43 am, Arife Vural wrote:
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys.
Sweet, that would be perfect :)
BTW, Peter, until now I have not got any IP config info from Paul Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box.
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch port) -Peter -- Peter_Losher@isc.org | ISC | OpenPGP Key E8048D08 | "The bits must flow"
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys.
Sweet, that would be perfect :)
Still awake :-)
BTW, Peter, until now I have not got any IP config info from Paul Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box.
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch port)
OK, great. I will send an announcement to our peers today or tomorrow about moving the box. Arife
On Tuesday 31 August 2004 02:16 am, Arife Vural wrote:
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch port)
OK, great. I will send an announcement to our peers today or tomorrow about moving the box.
BTW, what do you want the PTR record for the management address to be? Best Wishes - Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
BTW, what do you want the PTR record for the management address to be?
rrc141.ripe.net, please. arife
On Tuesday 31 August 2004 03:29 pm, Arife Vural wrote:
BTW, what do you want the PTR record for the management address to be?
rrc141.ripe.net, please.
Here is your new network info IP: 204.152.184.27/27 Gateway: 204.152.184.1 The in-addr.arpa record for 204.152.184.27 is being propagated now. Let me know if you need a local resolver, etc. Also, would you like to enable IPv6 on this box? Best Wishes - Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Here is your new network info
IP: 204.152.184.27/27 Gateway: 204.152.184.1
The in-addr.arpa record for 204.152.184.27 is being propagated now.
Thanks.
Let me know if you need a local resolver, etc. Also, would you like to enable
That would be nice if you have local resolver and ntp server on the same LAN.
IPv6 on this box?
Yes, that would be nice as well. Can we use the same interface we use for IPv4 or do we need seperate network card for IPv6? Regards. Arife
On Wednesday 01 September 2004 02:31 am, Arife Vural wrote:
That would be nice if you have local resolver and ntp server on the same LAN.
Sure, the local resolver is 204.152.184.67, and you can use clock.isc.org to sync your clock using ntp.
Yes, that would be nice as well. Can we use the same interface we use for IPv4 or do we need seperate network card for IPv6?
No, you can use the same NIC for both IPv4 and IPv6. (we do it here all the time) We have started to go away from the standard EUI64 addressing for IPv6, so if you are running FreeBSD on that box, I can give you instructions on how to set the link local address so we can still use normal router advertisements to apply the prefix to it. Best Wishes - Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
Arife & Peter, The route collector (RRC08) was just turned down. I'll unrack this morning and then wait to hear from your team about the pickup. Joe Pucik Sr. Engineer MCI, MAE Engineering 408-975-2249 -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Tuesday, August 31, 2004 2:17 AM To: Peter Losher Cc: Joe Pucik; Thomas.Bechly@mci.com; ris-int@ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys.
Sweet, that would be perfect :)
Still awake :-)
BTW, Peter, until now I have not got any IP config info from
Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box.
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch
Paul port) OK, great. I will send an announcement to our peers today or tomorrow about moving the box. Arife
Hi Joe, We are planning to unplug it tomorrow. 3rd of Sep, at 9.00 Pacific. If you have not move out from the rack, could you power on it and shutdown tomorrow? Arife On Thu, Sep 02, 2004 at 08:42:10AM -0700, Joe Pucik wrote:
Arife & Peter,
The route collector (RRC08) was just turned down. I'll unrack this morning and then wait to hear from your team about the pickup.
Joe Pucik Sr. Engineer MCI, MAE Engineering 408-975-2249
-----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Tuesday, August 31, 2004 2:17 AM To: Peter Losher Cc: Joe Pucik; Thomas.Bechly@mci.com; ris-int@ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys.
Sweet, that would be perfect :)
Still awake :-)
BTW, Peter, until now I have not got any IP config info from
Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box.
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch
Paul port)
OK, great. I will send an announcement to our peers today or tomorrow about moving the box.
Arife
No problem Joe -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Thursday, September 02, 2004 8:51 AM To: Joe Pucik Cc: 'Peter Losher'; Thomas.Bechly@mci.com; ris-int@ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West Hi Joe, We are planning to unplug it tomorrow. 3rd of Sep, at 9.00 Pacific. If you have not move out from the rack, could you power on it and shutdown tomorrow? Arife On Thu, Sep 02, 2004 at 08:42:10AM -0700, Joe Pucik wrote:
Arife & Peter,
The route collector (RRC08) was just turned down. I'll unrack this morning and then wait to hear from your team about the pickup.
Joe Pucik Sr. Engineer MCI, MAE Engineering 408-975-2249
-----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Tuesday, August 31, 2004 2:17 AM To: Peter Losher Cc: Joe Pucik; Thomas.Bechly@mci.com; ris-int@ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West
That sounds good to me, I will shutdown the box at 9AM (Pacific) and then you can disconnect the box anytime that suits both of you guys.
Sweet, that would be perfect :)
Still awake :-)
BTW, Peter, until now I have not got any IP config info
Vixie. Do you think you can help us to provide IP config at PAIX? It would be nice if we can do the changes before moving the box.
That info will come from me, I'll get you the new network info later today so you can preconfigure the box for management transit before shutting it down. (Paul is still working on the PAIX switch
from Paul port)
OK, great. I will send an announcement to our peers today or tomorrow about moving the box.
Arife
Hi Joe, rrc08 is still unreachable. Did you have chance to power on? Regards. Arife
It looks like the Linux OS did not load properly before. I've just rebooted and watching for the Linux 2.4.26-3 load to complete. More to come. Joe Pucik -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Thursday, September 02, 2004 1:44 PM To: Joe Pucik Cc: 'Peter Losher'; Thomas.Bechly@mci.com; ris-int@ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West Hi Joe, rrc08 is still unreachable. Did you have chance to power on? Regards. Arife
On Thursday 02 September 2004 08:50 am, Arife Vural wrote:
We are planning to unplug it tomorrow. 3rd of Sep, at 9.00 Pacific. If you have not move out from the rack, could you power on it and shutdown tomorrow?
Can I pick up the system at around noon tomorrow (Friday)? -Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
On Thursday 02 September 2004 01:20 pm, Peter Losher wrote:
On Thursday 02 September 2004 08:50 am, Arife Vural wrote:
We are planning to unplug it tomorrow. 3rd of Sep, at 9.00 Pacific. If you have not move out from the rack, could you power on it and shutdown tomorrow?
Can I pick up the system at around noon tomorrow (Friday)?
Does this work for you Joe? (I'd like to confirm before heading down) -Peter -- Peter_Losher@isc.org | ISC | OpenPGP Key E8048D08 | "The bits must flow"
Peter,
Does this work for you Joe? (I'd like to confirm before heading down)
Could you also pick up the installation CD from Joe? Thanks, Arife
On Friday 03 September 2004 02:29 am, Arife Vural wrote:
Could you also pick up the installation CD from Joe?
Sure. -- Peter_Losher@isc.org | ISC | OpenPGP Key E8048D08 | "The bits must flow"
Hi Paul, Peter, Everything is ready on RIS box, except the peering IP address. I'm just wondering whether any progress about getting peering IP address for RIS box. BTW, I will be away for vacation from this Wed. Vasco, a colleague of mine, will work on relocating RIS box at PAIX. Please, do not forget to CC him and ris-request@ripe.net when you reply this e-mail. Regards. Arife
On Monday 27 September 2004 05:34 am, Arife Vural wrote:
Everything is ready on RIS box, except the peering IP address.
Cool.
I'm just wondering whether any progress about getting peering IP address for RIS box.
Paul has been working with Switch and Data on getting you access to the PAIX peering switch, so I'll let him give a status report on this.
BTW, I will be away for vacation from this Wed. Vasco, a colleague of mine, will work on relocating RIS box at PAIX. Please, do not forget to CC him and ris-request@ripe.net when you reply this e-mail.
Will do. Have a nice holiday. :) Best Wishes - Peter -- Peter_Losher@isc.org | ISC | OpenPGP 0xE8048D08 | "The bits must flow"
I'm just wondering whether any progress about getting peering IP address for RIS box.
Paul has been working with Switch and Data on getting you access to the PAIX peering switch, so I'll let him give a status report on this.
OK.
BTW, I will be away for vacation from this Wed. Vasco, a colleague of mine, will work on relocating RIS box at PAIX. Please, do not forget to CC him and ris-request@ripe.net when you reply this e-mail.
Will do. Have a nice holiday. :)
Thanks. Arife
participants (4)
-
Arife Vural -
Joe Pucik -
Matthew Williams -
Peter Losher