I think we could do that Joao On 19 Jan, 2005, at 13:50, Arife Vural wrote:
Hi Joe,
Just James reminded me, we have USB port on RIS box, if you can find a USB-Serial converter, we can use that port for us.
Arife
On Wed, Jan 19, 2005 at 10:41:58AM +0100, Arife Vural wrote:
Hi Joe,
Can you confirm that your box in New York has two serial ports available, one to talk to our console and one to act as RIS console?
It looks we have only one serial port, I did not think about that. Please go head and do the cabling, we can use that port F root.
I will get back to you about user info.
Arife
Joe
Begin forwarded message:
From: Joao Damas <Joao_Damas@isc.org> Date: 18 January 2005 09:38:42 EST To: Systems Operations <ops-workers@isc.org> Subject: Fwd: Cross-console for RIS box - F root in NYC
RIPE are agreeable to a cross console arrangement if we can get the cables in place. OUr username on their box will be isc, and theirs on ours will be risops, as per below
Joao
Begin forwarded message:
From: Joao Damas <Joao_Damas@isc.org> Date: 17 January, 2005 12:39:28 CET To: Arife Vural <arife@ripe.net> Cc: ris-int@ripe.net, andrei@ripe.net Subject: Re: [henk@ripe.net: Fwd: Re: [Fwd: Cross-console for RIS box - F root in NYC]]
On 17 Jan, 2005, at 11:04, Arife Vural wrote:
Hi Joao,
Sorry for the late reply.
That sounds good. Do you think you can do the cabling over there?
I think we can get telehouse to do it for us, yes.
I ask OPS to create an account on RIS box, and you can get the console through this user. As username, is isc OK, or would you like to have something else?
isc is fine for us.
For ris, I suggest you to use risops.
shall do I will let you know as we get telehouse to schedule this
Joao