- Ris-int - mailman.ripe.net

Minutes of RIS meeting
by Arife Vural 09 Sep '04

09 Sep '04

Any comment is nothing more than welcome. Arife -- Bi-weekly RIS meeting - 6 Sep, 2004 10.00am. Attendees: Arife, Shane, Henk, Bruce, James, Gerard. - abcoude decommission abcoude will continue to run until it will be replaced by new hardware. Ordering new hardware will be done around Nov. - RIS presentation @R49 Matthew will give an update @R49. Shane, Henk, Ruud and Matthew will get together to discuss details next week. Most probably Tuesday. Ziya will help Matthew during the demo at R49. - Status of RRC14 and RRC13 RRC14 is installed, but it's not network reachable. Arife is in contact with Peter Losher to put online this week. RRC13, Bruce waits IP config from Elena. When he gets those info, he will burn the CD and deliver CD to Elena during the RIPE meeting. - Documentation Kevin did some work on SED side to move RIS documents from NP pages. Arife will look at and bit tidy up the pages. James and Bruce will prepare the OPS part of doc, and both would be ready on Wed. There would be cross link from both pages to each other. - rsync schema It's finished. How to update files on RRCs will be documented by OPS. - RIS CGI Arife and Ziya built up the frame work to build up RIS CGI by using Mason and Perl. Arife started to coding from ASinuse. After ASinuse is finished, probably today. Tomorrow, Ziya and Arife will create the package and will do the server installation and WEB interface modules on halfweg. After that point, the rest of the CGI's will be built up by using the same structure. - Beacons Henk had some talk with Olaf Maneal and Zhuoqing Morley Mao during SIGCOM. They asked to continue to announce Beacon Prefixes as we do now and announce additional Anchor prefixes per RRCs. To do this, we would need more Prefix. Henk will send an e-mail around what he discussed during SIGCOM and SED will take it from there. - AOB Gerard brought up the issue which users should stay on RIS servers. NP people would keep their users on RIS servers, but they will not have root access.

2 4

Agenda Points of RIS meeting on Mon
by Arife Vural 05 Sep '04

05 Sep '04

- abcoude's decommission - RIS presentation @ R49 - status of RRC08/RRC14 and RRC13 - documentation issue, Ruud's e-mail about last bits of RIS transition. - rsync schema update - RIS CGI update If you have any additional agenda point, please let me know. Arife

3 2

Time Out
by Arife Vural 03 Sep '04

03 Sep '04

<<<DO NOT CHANGE THE TIME/DATE/TYPE OF TIMEOUT HERE>>> <<<THAT WON'T BE REFLECTED IN CTIME. IF YOU WANT TO>>> <<<MAKE SUCH CHANGES, CANCEL THE STT AND START OVER>>> Dear Colleagues, Please note the following time out: Who: Arife Vural First Day: 20.10.2004 Starts at: 09:00 Last Day: 02.11.2004 Ends at: 17:00 Working days: [10.00] Type: VAC Reason: [Turkey] If you have any further questions, please do not hesitate to contact me. Thank you, Arife Vural

1 0

Time Out
by Arife Vural 03 Sep '04

03 Sep '04

<<<DO NOT CHANGE THE TIME/DATE/TYPE OF TIMEOUT HERE>>> <<<THAT WON'T BE REFLECTED IN CTIME. IF YOU WANT TO>>> <<<MAKE SUCH CHANGES, CANCEL THE STT AND START OVER>>> Dear Colleagues, Please note the following time out: Who: Arife Vural First Day: 06.10.2004 Starts at: 09:00 Last Day: 19.10.2004 Ends at: 17:00 Working days: [10.00] Type: MED Reason: [optional for vacation] If you have any further questions, please do not hesitate to contact me. Thank you, Arife Vural

1 0

Time Out
by Arife Vural 03 Sep '04

03 Sep '04

<<<DO NOT CHANGE THE TIME/DATE/TYPE OF TIMEOUT HERE>>> <<<THAT WON'T BE REFLECTED IN CTIME. IF YOU WANT TO>>> <<<MAKE SUCH CHANGES, CANCEL THE STT AND START OVER>>> Dear Colleagues, Please note the following time out: Who: Arife Vural First Day: 04.10.2004 Starts at: 09:00 Last Day: 05.10.2004 Ends at: 17:00 Working days: [2.00] Type: CLV Reason: [optional for vacation] If you have any further questions, please do not hesitate to contact me. Thank you, Arife Vural

1 0

let bug in bash and data collection
by Arife Vural 03 Sep '04

03 Sep '04

FYI: Yesterday, begining of month, script that creates the rawdata dir on RRCs did not work because of let bug [1] in bash and rawdata was not collected on RRCs from 20040901 00:00 to 20040901 08:20 UTC. I fixed it when I noticed the problem in the morning yesterday. Arife [1] In bash the following lines does not work if x value is 8. let x=x+1

2 2

old RRC08 or new rrc14
by Arife Vural 03 Sep '04

03 Sep '04

Hi James, Bruce, Do you have any idea what might have happened rrc08? It looks it is not rebooted yesterday after Joe powered it off. Shall we ask Peter do a new installation on the box? Probably, he has to choose RRC08 config from installation menu and then change the IP address and gateway afterwards. I hope he could get root login with that installation CD. Arife

1 0

RE: [ris-int] Re: RIS box @ MAE-West
by Joe Pucik 03 Sep '04

03 Sep '04

Arife, RRC08 is still not completing the loading of Linux. I've rebooted a 3rd time with the same result. Any suggestions? Joe Pucik -----Original Message----- From: Joe Pucik [mailto:joe.pucik@mci.com] Sent: Thursday, September 02, 2004 2:07 PM To: 'Arife Vural' Cc: 'Peter Losher'; 'ris-int(a)ripe.net' Subject: RE: [ris-int] Re: RIS box @ MAE-West Arife, RRC08 is still trying to load Linux. Seems to be stuck in the load process. This is the 2nd reboot. Joe Pucik -----Original Message----- From: Joe Pucik [mailto:joe.pucik@mci.com] Sent: Thursday, September 02, 2004 1:59 PM To: 'Arife Vural' Cc: 'Peter Losher'; 'Thomas.Bechly(a)mci.com'; 'ris-int(a)ripe.net'; 'David Stephens' Subject: RE: [ris-int] Re: RIS box @ MAE-West It looks like the Linux OS did not load properly before. I've just rebooted and watching for the Linux 2.4.26-3 load to complete. More to come. Joe Pucik -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Thursday, September 02, 2004 1:44 PM To: Joe Pucik Cc: 'Peter Losher'; Thomas.Bechly(a)mci.com; ris-int(a)ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West Hi Joe, rrc08 is still unreachable. Did you have chance to power on? Regards. Arife

2 2

RE: [ris-int] Re: RIS box @ MAE-West
by Joe Pucik 02 Sep '04

02 Sep '04

Arife, RRC08 is still trying to load Linux. Seems to be stuck in the load process. This is the 2nd reboot. Joe Pucik -----Original Message----- From: Joe Pucik [mailto:joe.pucik@mci.com] Sent: Thursday, September 02, 2004 1:59 PM To: 'Arife Vural' Cc: 'Peter Losher'; 'Thomas.Bechly(a)mci.com'; 'ris-int(a)ripe.net'; 'David Stephens' Subject: RE: [ris-int] Re: RIS box @ MAE-West It looks like the Linux OS did not load properly before. I've just rebooted and watching for the Linux 2.4.26-3 load to complete. More to come. Joe Pucik -----Original Message----- From: Arife Vural [mailto:arife@ripe.net] Sent: Thursday, September 02, 2004 1:44 PM To: Joe Pucik Cc: 'Peter Losher'; Thomas.Bechly(a)mci.com; ris-int(a)ripe.net; 'David Stephens' Subject: Re: [ris-int] Re: RIS box @ MAE-West Hi Joe, rrc08 is still unreachable. Did you have chance to power on? Regards. Arife

1 0

decommisioning abcoude
by Gerard Leurs 02 Sep '04

02 Sep '04

Dear RIS team. Can you tell me if it is possible to start decommissioning abcoude? Some backgroundinfo: we are in the process of getting rid of all sparcs. By the end of this month only 5 sparcs will be in the SUN-support contract. And abcoude is not one of them, as it is a 2nd backup for weesp/halfweg. Thanks, Gerard.

4 4

http://www4.ripe.net/ris/
by Matthew Williams 02 Sep '04

02 Sep '04

Hi there, Did a little more work there. Pls check it out. We should probably plan one more meeting (dedicated afternoon?) for going through the final stuff. Cheers, Matthew

2 4

RIPE NCC RIS box (RRC08) is leaving MAE-West at 3rd of Sep, 2004 18.00 CEST.
by Arife Vural 01 Sep '04

01 Sep '04

Dear All, Our Remote Route Collector will be disconnected from MAE-West as of 3rd Sep, 2004 18.00 CEST. We will relocate the RIS box at PAIX. We hope we would get more interest at PAIX. We are planning to put RIS box online sometime next week. When it's online, we will send an announcement to the list. Kind regards. Arife

1 0

RIPE NCC RIS box (RRC08) is leaving MAE-West at 3rd of Sep, 2004 18.00 CEST.
by Arife Vural 01 Sep '04

01 Sep '04

Dear All, Our Remote Route Collector will be disconnected from MAE-West as of 3rd Sep, 2004 18.00 CEST. Please do not forget to update your configs. Our peering info, IP address: 198.32.200.157 AS number: 12654 We will be available at PAIX so soon. If you are available there and like to peer with RIS, please send your details to rispeering(a)ripe.net. We will get back to you as soon as the RIS box is online at PAIX. Kind regards. Arife

1 0

R: Kernel on RRC06
by Arife Vural 31 Aug '04

31 Aug '04

Hereby I wish to request a service from Operations. Detailed description: --------------------- MD5 support on RRC06 does not work and I'm just wondering whether we still use the kernel that Japan guy compiled. If this is the case, then MD5 might not be enabled on RRC06 properly. Few other things which are related with rrc rsync schema, I got this warning when I run ps command on RRCs, arife@rrc06:~$ ps aux |grep bgpd {sys_alarm} {register_sysctl_table} Warning: /System.map does not match kernel data. quagga 253 0.3 3.9 39948 36072 ? S Jun23 326:06 /usr/lib/quagga/bgpd --daemon arife 14412 0.0 0.0 1516 480 ttyp1 S 16:15 0:00 grep bgpd Anything to be worried or not? Also could you please change the owner of /etc/quagga dirs to quagga user and group? It's owned by root and when you make bgp config changes, it's not allowed to save the config. Regards, Arife Vural

1 0

bgpd dies
by James Aldridge 31 Aug '04

31 Aug '04

http://bugzilla.quagga.net/show_bug.cgi?id=103 We seem to be seeing this bug too. Don't know whether it's a Linux thing or a Quagga version 0.96.5 thing... worth keeping an eye on the quagga-users and quagga-dev lists. James

2 2

IPv6 updates plots
by James Aldridge 31 Aug '04

31 Aug '04

Take a look at http://www.ris.ripe.net/ipv6-updates/all/ (or any of the individual RRC's plots) and you'll see a certain periodicity about the graph. It seems that the RRD is only getting about half the data: 5 minutes and 35 minutes past each hour: weesp runs the "collect" script and pushes the raw files to halfweg. 0 minutes past each hour: halfweg runs the "ipv6-updates/update.sh" script looking for files from the "previous hour" (date -d "1 hour ago" +"%Y%m%d.%H"). However, at this time, only files up to the last run of "collect" (25 minutes earlier) are present - YYYYMMDD.HH00 to YYYYMMDD.HH35. Next time "update.sh" runs, an hour later, it again only looks at files from the previous hour (and not the missing files from the hour before that). Data from the last 25 minutes of each hour are never inserted into the RRD. A solution to this would be for risops@halfweg's crontab to run the "ipv6-updates/update.sh" sufficiently long after 5 minutes past the hour for the "collect" run on weesp to have pushed all the previous hour's files to halfweg. Thoughts? James

2 1

Tool to check RIS peering status
by James Aldridge 30 Aug '04

30 Aug '04

~risops/bin/peerstat is a simple script to report BGP peering status Examples: "peerstat all -lt 300" will show all peers which have changed state within 5 minutes (300 seconds) - typically peers which are flapping. risops@halfweg:~$ peerstat all -lt 300 AS20940 [ 195.66.224.168 ] on rrc01 DOWN for 0w 0d 0h 0m 4s (4 seconds) AS12222 [ 198.32.160.47 ] on rrc11 UP for 0w 0d 0h 0m 10s (10 seconds) "peerstat rrc00,rrc01 -gt 86400" will show all peers on rrc00 and rrc01 which have been down for more than 86400 seconds (1 day): risops@halfweg:~$ peerstat rrc00,rrc01 -gt 86400 AS3257 [ 195.69.144.85 ] on rrc00 down "for ever" AS15861 [ 195.66.224.40 ] on rrc01 down "for ever" AS5604 [ 195.66.224.41 ] on rrc01 down "for ever" AS1299 [ 195.66.224.48 ] on rrc01 down "for ever" AS12513 [ 195.66.224.117 ] on rrc01 down "for ever" AS15861 [ 195.66.226.40 ] on rrc01 down "for ever" AS8272 [ 195.66.226.47 ] on rrc01 down "for ever" AS2818 [ 195.66.226.103 ] on rrc01 DOWN for 5w 6d 19h 0m 0s (3610800 seconds) AS8210 [ 195.66.226.107 ] on rrc01 DOWN for 2w 3d 6h 0m 0s (1490400 seconds) AS12390 [ 195.66.226.119 ] on rrc01 down "for ever" AS13127 [ 195.66.226.142 ] on rrc01 DOWN for 2w 6d 11h 0m 0s (1767600 seconds) "peerstat rrc08 -gt 2419200" will show all peers on rrc08 which have been down for more than 2419200 seconds (4 weeks): risops@halfweg:~$ peerstat rrc08 -gt 2419200 AS2551 [ 198.32.200.14 ] on rrc08 down "for ever" James

1 0

Fw: NCC#2004081420 [RIPE beacon request!]
by RIS 30 Aug '04

30 Aug '04

Hi guys, What do you think about the following request? It looks he is asking to extend our anycast failover scenario to more RRCs. After discussing with him what kind of patterns he needs, we can use same prefix or we can use one of the free Beacon Prefixes. Arife ----- Begin forwarded message ----- Date: Fri, 13 Aug 2004 20:39:14 -0400 From: "Hitesh Ballani" <hitesh(a)cs.cornell.edu> To: <ris(a)ripe.net> Subject: NCC#2004081420 RIPE beacon request! Message-Id: <81224EA6DDA07C43BC7555E32401029E054219(a)EXCHVS2.cs.cornell.edu> Hello, I was wondering if you could spare a beacon for the following experiment: At the moment, one of your beacons (195.80.233.0/24) at advertised from 2 locations - LINX and AMS-IX. An interesting question is to study anycast fail-over time from an end user perspective - i.e given that the advertisement is withdrawn from AMS-IX at a particular instant, how long is it before convergence is reached and packets from a node, which were earlier being routed to AMS-IX, are routed to LINX. I tried running this experiment from a bunch of nodes on Planetlab but I have not been able to locate any node whose packets are routed to AMS-IX and so, I am never able to analyze the convergence time (for that matter, even nodes in Netherlands have their packets routed to LINX). Here, "packets being routed to LINX" implies that periodic traceroutes from my Planetlab sites show so. This is important to me as I am currently working an a proxy based deployment model for IP anycast and so anycast failover time through BGP is critical for me (see http://www.cs.cornell.edu/People/francis/pias.pdf and http://www.cs.cornell.edu/People/francis/pias/pias-worlds.pdf for details!). As a matter of fact we are in the process of obtaining 3 /22 blocks from ARIN for this very purpose - however, given the long drawn nature of that process, I thought it would be nice if I could use your advertisement infrastructure to answer some niggling questions which are critical for the success of our proposal. I was wondering if it would be possible for me to get a beacon to be advertised from more locations (ideally, from America(RRC08), Europe(a number of locations), and Asia(RRC06)). While a beacon being advertised from 2 locations would suffice for the above experiment, but advertisements from more than 2 locations would allow me to look at other stuff such as - How good is IP anycast at selecting nearby locations? Ideally, when a node sends out a packet to a anycast location, it should be routed to the destination which is closest - but with the policy based nature of BGP, it is not clear if it does. Such an experiment would make more sense with greater number of advertising locations. I tried determining answers to these questions using the anycasted root servers and the servers belonging to the AS-112 project but the hierarchical nature of their deployment prevents me from coming to any conclusions. While the above description may sound as if I am looking for just an end-user analysis, but I will also be looking at BGP updates for the anycast prefix to determine if advertising a prefix from many locations has an adverse impact on the visibility of the prefix due to reasons such as route flap dampening. If the above description sounds terribly confusing, I will be glad to provide additional details about the experiments I plan to run. Also, if such an arrangement is possible, I will plan out the detailed A/W pattern and the sites involved. Thanks, Hitesh ------ End forwarded message ------

4 4

RRC06
by Henk Uijterwaal (RIPE NCC) 27 Aug '04

27 Aug '04

Hi, Mainly FYI. I had an action on myself to contact Akiro Kato re: more peerings at the Japan RRC. He suggested a couple of mailing lists to write to. I did that yesterday, if you see a flurry of peering requests from there, blame me. If you don't, blame me as well ;-) Henk ------------------------------------------------------------------------------ Henk Uijterwaal Email: henk.uijterwaal(at)ripe.net RIPE Network Coordination Centre http://www.amsterdamned.org/~henk P.O.Box 10096 Singel 258 Phone: +31.20.5354414 1001 EB Amsterdam 1016 AB Amsterdam Fax: +31.20.5354445 The Netherlands The Netherlands Mobile: +31.6.55861746 ------------------------------------------------------------------------------ Process and Procedure are the last hiding place of people without the wit and wisdom to do their job properly. (David Brent).

1 0

Fw: NCC#2004081626 [Re: Test allocations]
by RIPE NCC RIS 26 Aug '04

26 Aug '04

Hello RIS-all, As a request from RS, we stopped announcing the following prefixes through the RIS AS number on 18/08/2004: 85.192.0.0/16 85.255.248.0/21 But it appears that yesterday we restarted to announce the same prefixes. Can it be that some old configuration showed up again? What should be done to cancel these announcements? Vasco Asturiano ----- Begin forwarded message ----- Date: Thu, 26 Aug 2004 12:55:56 +0200 From: Mike Petuschak <mike(a)ripe.net> To: RIS <ris-request(a)ripe.net> Subject: Re: NCC#2004081626 Test allocations Cc: Pierre Baume <pierre(a)ripe.net>, Timothy Lowe <timothy(a)ripe.net> Message-Id: <20040826105556.GA30815(a)ripe.net> Hi, It looks like you started announcing the ranges from 85/8 once again, could you please remove them? > whois -h riswhois.ripe.net -M 85.192/10 % This is RIPE NCC's Routing Information Service % whois gateway to collected BGP Routing Tables % IPv4 or IPv6 address to origin prefix match % % For more information visit http://www.ripe.net/ris/riswhois.html route: 85.192.0.0/16 origin: AS12654 descr: RIPE-NCC-RIS-AS RIPE NCC RIS Project. lastupd-frst: 2004-08-17 09:00Z 195.69.144.234@rrc03 lastupd-last: 2004-08-24 21:37Z 80.81.192.126@rrc12 seen-at: rrc03,rrc04,rrc07,rrc12 num-rispeers: 7 source: RISWHOIS route: 85.255.248.0/21 origin: AS12654 descr: RIPE-NCC-RIS-AS RIPE NCC RIS Project. lastupd-frst: 2004-08-17 09:00Z 195.69.144.234@rrc03 lastupd-last: 2004-08-24 21:37Z 80.81.192.126@rrc12 seen-at: rrc03,rrc04,rrc07,rrc12 num-rispeers: 7 source: RISWHOIS -- Sincerely, Mike Petuschak RIPE NCC > Dear Arife, > > Please only remove the ranges from 85/8, i.e. > network 85.192.0.0/16 > network 85.255.248.0/21 > > the following route objects needs to be removed too: > > route: 85.192.0.0/16 > descr: RIPE-NCC-RIS New Allocation Filter Checking > origin: AS12654 > mnt-by: RIPE-NCC-RIS-MNT > changed: risops(a)ripe.net 20040402 > source: RIPE > > route: 85.255.248.0/21 > descr: RIPE-NCC-RIS New Allocation Filter Checking > origin: AS12654 > mnt-by: RIPE-NCC-RIS-MNT > changed: risops(a)ripe.net 20040402 > source: RIPE > > > > > >> It looks we are announcing the following networks, do you want >> me to remove all? >> >> network 85.192.0.0/16 >> network 85.255.248.0/21 >> network 86.192.0.0/16 >> network 86.255.248.0/21 >> network 87.192.0.0/16 >> network 87.255.248.0/21 >> network 88.192.0.0/16 >> network 88.255.248.0/21 >> >> Arife >> >> On Tue, 17 Aug 2004 09:41:13 +0200, Mike Petuschak wrote: >>> Dear RIS, >>> >>> As both James & Daniel are on holidays, >>> can somebody else please stop announcing the >>> ranges from 85/8 and remove the route objects? >>> >>> Thanks a lot. >>> >>> -- >>> Mike >>> >>> ----- Forwarded message from Mike Petuschak <mike(a)ripe.net> ----- >>> >>> Date: Tue, 10 Aug 2004 16:38:15 +0200 >>> From: Mike Petuschak <mike(a)ripe.net> >>> To: James Aldridge <james(a)ripe.net> >>> Cc: Daniel Karrenberg <dfk(a)ripe.net>, lsd(a)ripe.net, >>> Pierre Baume <pierre(a)ripe.net> >>> Subject: Re: Test allocations >>> >>> Dear James, >>> >>> Could you please stop announcing the ranges from 85/8 and remove the route >>> objects? We allocated first /12 from 85/8. ------ End forwarded message ------ --

1 0

RE: myASn in training
by Matthew Williams 25 Aug '04

25 Aug '04

> yes, i can! Excellent :) Cheers, Matthew > -----Original Message----- > From: Vesna Manojlovic [mailto:BECHA@ripe.net] > Sent: 25 August 2004 09:20 > To: Matthew Williams > Subject: Re: myASn in training > > > hi matthew, > > > On Tue, 24 Aug 2004 19:39:44 +0200 > "Matthew Williams" <matthew(a)ripe.net> wrote: > > > Hi Vesna, > > > > Do you now know whether you can join the meeting (see ctime)? > > > > yes, i can! > > > > I would like to know this before I go to Can next week. > > > > have a good time :) > > > Cheers, > > Matthew > > > thanks, > b >

1 0

RE: myASn in training
by Matthew Williams 24 Aug '04

24 Aug '04

Hi Vesna, Do you now know whether you can join the meeting (see ctime)? I would like to know this before I go to Can next week. Cheers, Matthew > -----Original Message----- > From: Matthew Williams [mailto:matthew@ripe.net] > Sent: 18 August 2004 19:44 > To: 'Vesna Manojlovic' > Cc: 'ris-int(a)ripe.net'; 'rumy(a)ripe.net'; 'arno(a)ripe.net' > Subject: RE: myASn in training > > > > > > > Hi Matthew, all, > > > > let's meet to talk about it :) Will you make the C-time entry? > > > > Will do. Who should be there? Arife, Arno, you and I? > > > On Tue, 17 Aug 2004 14:04:00 +0200 > > "Matthew Williams" <matthew(a)ripe.net> wrote: > > > > > [thanks for the hook-up, Rumy] > > > > > > Hi Vesna, > > > > > > Arife should be included on this too. > > > > > > > Vesna: could you discuss this with Matthew (and if necessary > > > > Arno and/or > > > > Ferenc) and let me know what your thoughts are? > > > > > > Include a section in rr training? > > > > > > > We already have one slide in the RR course about the myASn; > > sometimes we used to show the demo (but I think my account > > expired...). > > Nope, should be okay unless you're trying to access the old prototype. > > > > > We can maybe change that -- depending on how much attention > > you want to give to this service, and how much space we can > > "free-up" in the curent course, and how it fits with the rest > > of topics.. > > > > Personally, I would prefere if we can do some hands-on with > > the "myASn", but that would require opening 20 (or 5?) > > demo-accounts for each course, thinking of the tasks to give > > to the participants (or sub-groups), deciding what are the > > most useful features to let them see/practice, how much time > > it takes to do all that etc... > > > > I guess this brain-dump puts some of the topics on the agenda > > for the meeting :) > > Fine. > > Cheers, > Matthew > > > > > > Cheers, > > > Matthew > > > > > > > ciao, > > becha > > > > > > > > -----Original Message----- > > > > From: Rumy Kanis [mailto:rumy@ripe.net] > > > > Sent: 17 August 2004 13:55 > > > > To: Matthew Williams; 'Rumy Kanis'; becha(a)ripe.net > > > > Cc: 'Henk Uijterwaal'; 'Matthew Williams' > > > > Subject: myASn in training > > > > > > > > > > > > Hi Matthew, > > > > > > > > I am sort of getting back up to speed again :-) but still > > > > drowning in my mails. > > > > > > > > I am including Vesna in this reply, I think it would be best > > > > if you discuss > > > > this with her. Vesna has the overall responsibility over the > > > > different > > > > training courses and their content (Arno has > > responsibility over the > > > > advanced courses, Ferenc over the LIR). Vesna will have a good > > > > understanding of whether this fits into one of our trainings > > > > and if so, > > > > into which one and in what format. > > > > > > > > Vesna: could you discuss this with Matthew (and if necessary > > > > Arno and/or > > > > Ferenc) and let me know what your thoughts are? > > > > > > > > Thanks! > > > > > > > > Cheers, > > > > Rumy > > > > > > > > > > > > At 02:37 PM 7/29/2004 +0200, Matthew Williams wrote: > > > > >Hi Rumy, > > > > > > > > > >I see that you're on VAC until mid-Aug. Please get back > > to me when > > > > >you're > > > > >up to speed again. > > > > > > > > > >Hope hols were relaxing :) > > > > > > > > > >Cheers, > > > > >Matthew > > > > > > > > > > > -----Original Message----- > > > > > > From: Matthew Williams [mailto:matthew@ripe.net] > > > > > > Sent: 22 July 2004 18:02 > > > > > > To: 'Rumy Kanis' > > > > > > Cc: 'Henk Uijterwaal' > > > > > > Subject: FW: Announcement Routing Registry Training Courses > > > > > > > > > > > > > > > > > > Hi Rumy, > > > > > > > > > > > > Henk suggested that I get in touch with you about > > > > including a myASn > > > > > > section into one of your trainings. Version 1 will be > > > > ready before > > > > > > the next RIPE meeting. Any thoughts? ;) > > > > > > > > > > > > Cheers, > > > > > > Matthew > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: routing-wg-admin(a)ripe.net > > > > [mailto:routing-wg-admin@ripe.net] > > > > > > > On Behalf Of RIPE NCC Training > > > > > > > Sent: 21 July 2004 16:27 > > > > > > > To: local-ir(a)ripe.net; db-wg(a)ripe.net; > routing-wg(a)ripe.net; > > > > > > > irrtoolset(a)ripe.net > > > > > > > Subject: Announcement Routing Registry Training Courses > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dear Colleagues, > > > > > > > > > > > > > > [apologies for duplicate postings] > > > > > > > > > > > > > > As a service to its members the RIPE NCC offers > the "Routing > > > > > > > Registry Training Course". > > > > > > > > > > > > > > The main objective of the "Routing Registry Training > > > > Course" is to > > > > > > > familiarise the LIRs with the features of the Routing > > > > > > > Registry, > > > > > > > while introducing the relevant tools and services of > > > > the RIPE NCC. > > > > > > > The course also offers practical exercises. > > > > > > > > > > > > > > OVERVIEW OF TOPICS COVERED IN THE COURSE: > > > > > > > - Routing Registry as a part of the RIPE Whois > Database and > > > > > > > the > > > > > > > Internet Routing Registry (IRR) > > > > > > > - Specifying routing policies using (RPSL) > > > > > > > Routing Policy Specification Language and the > RtConfig tool > > > > > > > - IRRToolSet > > > > > > > - Routing Information Service (RIS) > > > > > > > - Routing Registry Consistency Check Project > > > > > > > > > > > > > > Please note that this is an advanced course. It will: > > > > > > > - NOT teach the basics of routing > > > > > > > - NOT teach the basics of RIPE Database operations, > > > > > > > - NOT describe how to receive Internet resources from > > > > the RIPE NCC > > > > > > > - NOT describe how to operate a Local Internet > > Registry (LIR) > > > > > > > > > > > > > > The target audience of the course are technical staff of > > > > > > > LIRs: e.g. network operators, engineers etc. This > course is > > > > > > > not > > > > > > > intended for administrative or management staff (e.g. > > > > > > > Hostmasters) . It is assumed that all attendees will be > > > > > > familiar with > > > > > > > Border Gateway Protocol routing and with the RIPE > > > > Database (i.e. > > > > > > > creating/modifying objects). > > > > > > > > > > > > > > This course is based on interactive exercises in a > > > > local network > > > > > > > set-up. Please bring your laptops equipped with the > > > > > > following: > > > > > > > - A working Ethernet card, > > > > > > > - Three meters of Ethernet cable, > > > > > > > - A secure connection client, > > > > > > > - A web browser. > > > > > > > > > > > > > > Please be prepared to share your laptop (or at least > > > > allow another > > > > > > > attendee to "look over your shoulder") if necessary. > > > > > > > > > > > > > > The Routing Registry Training Course is conducted in > > > > the English > > > > > > > language and is free of charge, since it is covered by the > > > > > > > membership fee. > > > > > > > > > > > > > > More information about the Routing Registry Training > > > > Course can be > > > > > > > found > > > > > > > at: http://www.ripe.net/training/rr/ > > > > > > > > > > > > > > REGISTRATION: > > > > > > > > > > > > > > You can register for a Routing Registry Training > > Course at the > > > > > > > following URL: > > http://www.ripe.net/cgi-bin/trainingform.pl.cgi > > > > > > > > > > > > > > Or by completing the registration form at the end of > > > > this e-mail > > > > > > > and replying to <training(a)ripe.net> . In order to > > > > register for a > > > > > > > Routing Registry Training Course you must be an > > > > employee of an LIR > > > > > > > and either: > > > > > > > - be an LIR contact > > > > > > > - be confirmed by an LIR contact > > > > > > > > > > > > > > LIR contacts are those employees of an LIR who are > > > > registered with > > > > > > > RIPE NCC as authoritative contact persons. > > > > > > > > > > > > > > It is expected that most of those interested in > the Routing > > > > > > > Registry Training Course will not be an > > authoritative contact > > > > > > > person for their LIR, and therefore will be, refused by > > > > the course > > > > > > > registration "robot". In order to be admitted to > > the course, a > > > > > > > confirmation e-mail must be sent to > > <training(a)ripe.net>. Please > > > > > > > approach the LIR contacts from your organisation > personally, > > > > > > > since the identity of LIR contacts is > confidential, and the > > > > > > > RIPE NCC is > > > > > > > unable to divulge contact persons for any given LIR. > > > > > > > > > > > > > > Kind Regards, > > > > > > > Training Team > > > > > > > RIPE NCC > > > > > > > > > > > > > > > > ************************************************************** > > > > > > > ************** > > > > > > > > > > > > > > COURSE DATES AND VENUES > > > > > > > ======================== > > > > > > > > > > > > > > Date: Friday 15 October 2004 > > > > > > > Time: 0900 - 1700 > > > > > > > Location: Geneva, Switzerland > > > > > > > > > > > > > > AND: > > > > > > > Date: Tuesday 23 November 2004 > > > > > > > Time: 0900 - 1700 > > > > > > > Location: Damascus, Syria > > > > > > > > > > > > > > > > > > > > > AND: > > > > > > > Date: Friday 17 December 2004 > > > > > > > Time: 0900 - 1700 > > > > > > > Location: Amsterdam, the Netherlands > > > > > > > > > > > > > > > > ************************************************************** > > > > > > > *************** > > > > > > > > > > > > > > REGISTRATION FORM > > > > > > > ================= > > > > > > > > > > > > > > %START > > > > > > > > > > > > > > PART 1 - Registration > > > > > > > 1) Your name > > > > > > > Enter First name, Last name in full > > > > > > > e.g. John Doe > > > > > > > Mary-Beth Walton > > > > > > > > > > > > > > > > > > > > > # NAME [ ] > > > > > > > > > > > > > > 2) Your Registry ID (format: country-code.<name of > > registry>) > > > > > > > > > > > > > > # REG [ ] > > > > > > > > > > > > > > 3) Your e-mail address > > > > > > > > > > > > > > # EMAIL [ ] > > > > > > > > > > > > > > 4) Your NIC handle (optional) > > > > > > > > > > > > > > # NICHANDLE [ ] > > > > > > > > > > > > > > 5) The course you plan to attend (date and location) > > > > > > > > > > > > > > # COURSE [ ] > > > > > > > > > > > > > > %END > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > The Roman Rule: > > The one who says it cannot be done > > should never interrupt the one who is doing it. > > >

1 0

NCC#2004081420: No keepalive from Matthew
by Matthew Williams 24 Aug '04

24 Aug '04

Arife sent the guy a reply on the 20th that should've done the trick. Cheers, Matthew --- > Matthew Williams (MW243-RIPE) > Customer Liaison Engineer > RIPE NCC - http://www.ripe.net/np/

1 0

New RIS rawdata backup schedule
by Arife Vural 20 Aug '04

20 Aug '04

Just for your information: OPS took over the backup of rawdata from me. I passed all tapes to OPS. New backup schedule is: OPS keep two copy of the data, one is at OPS safe place and the other one is at ABN-Amro safe. Rawdata is written into tapes at OPS safe place once in a week (Firday's). For ABN-Amro, I do not know the schedule yet. OPS related doc is available at http://iii.ripe.net/ops/docs/areas/services/backup/risbackup.html OPS also will do zero level backup, but time schedule is not decided yet. I have updated RIS operational doc through the latest changes. http://iii.ripe.net/sed/twiki/bin/view/Doc/RISOperationalDocumentation Arife

1 0

Monday RIS meeting
by Arife Vural 20 Aug '04

20 Aug '04

Hi all, I'm not in next week, so I could not make RIS meeting. But, if you have any agenda items, please go and have the meeting. But, please do not forget to send minutes to the list. Arife

1 0