- Ris-int - mailman.ripe.net

Re: [ris-int] Re: Installation CD for RRC13
by James Aldridge 26 Jan '05

26 Jan '05

"'Evgueni Kouskevitch'" wrote: > On Tue, Nov 16, 2004 at 02:27:26PM +0100, Arife Vural wrote: > > > > Hi Evgueni, > > > > Thanks for getting back to us. There might be a problem at the > > installation CD. We will get back to you about it. > > Hi, > > do you have any news about the case? I'm not sure of the exact configuration of the machine. Could you please let me know full details of the disk/raid controllers, etc. so I can check that this is properly supported by the installation CD. Regards, James

2 2

New beacon prefixes and routing experiments
by Lorenzo Colitti 25 Jan '05

25 Jan '05

Hi, at the RIS meeting a couple of months ago I asked if it would make sense to reserve one or more IPv4 beacon prefixes for my fancy beacon ("as-set stuffing") experiments. However, there are very few prefixes left out of the new /19 that has been assigned to beacons. The new scheme envisages a /24 beacon prefix and a /24 anchor prefix for each RRC. So for the 13 currently active RRCs we use 26 prefixes out of the 32. But the current list of beacon prefix assignments ( http://www.ripe.net/projects/ris/docs/beaconlist.html ) lists two more beacons, one for K-root anycast failover, and one for anycast server research (requested by hitesh(a)cs.cornell.edu). If these were to need an anchor prefix each, we would be up to 30 prefixes out of the 32 we have. Therefore: - If possible, I would like to reserve two prefixes for as-set stuffing experiments - I think we should consider requesting more address space for beacons. With this arrangement, the address space we have would be completely maxed out from the start. So if, for example, the Dubai RRC were ever to come online, we wouldn't have a prefix to announce there. Or if another researcher were to request a custom beacon, we wouldn't have one to give them. Thoughts? Cheers, Lorenzo

1 0

Update of beacon prefixes (Ticket 107265)
by Henk Uijterwaal 24 Jan '05

24 Jan '05

Folks, I do not want to create panic, but this ticket has been open for more than 2 months and the deadline for returning the present block is approaching very rapidly. Is there any chance this can be done sometime really soon? Henk ------------------------------------------------------------------------------ Henk Uijterwaal Email: henk.uijterwaal(at)ripe.net RIPE Network Coordination Centre http://www.amsterdamned.org/~henk P.O.Box 10096 Singel 258 Phone: +31.20.5354414 1001 EB Amsterdam 1016 AB Amsterdam Fax: +31.20.5354445 The Netherlands The Netherlands Mobile: +31.6.55861746 ------------------------------------------------------------------------------ Look here junior, don't you be so happy. And for Heaven's sake, don't you be so sad. (Tom Verlaine)

1 0

Fwd: Cross-console for RIS box - F root in NYC
by Joe Abley 20 Jan '05

20 Jan '05

Arife, Can you confirm that your box in New York has two serial ports available, one to talk to our console and one to act as RIS console? Joe Begin forwarded message: > From: Joao Damas <Joao_Damas(a)isc.org> > Date: 18 January 2005 09:38:42 EST > To: Systems Operations <ops-workers(a)isc.org> > Subject: Fwd: Cross-console for RIS box - F root in NYC > > RIPE are agreeable to a cross console arrangement if we can get the > cables in place. OUr username on their box will be isc, and theirs on > ours will be risops, as per below > > Joao > > Begin forwarded message: > >> From: Joao Damas <Joao_Damas(a)isc.org> >> Date: 17 January, 2005 12:39:28 CET >> To: Arife Vural <arife(a)ripe.net> >> Cc: ris-int(a)ripe.net, andrei(a)ripe.net >> Subject: Re: [henk(a)ripe.net: Fwd: Re: [Fwd: Cross-console for RIS box >> - F root in NYC]] >> >> >> On 17 Jan, 2005, at 11:04, Arife Vural wrote: >> >>> >>> Hi Joao, >>> >>> Sorry for the late reply. >>> >>> That sounds good. Do you think you can do the cabling over there? >> >> I think we can get telehouse to do it for us, yes. >> >>> I ask OPS >>> to create an account on RIS box, and you can get the console through >>> this user. >>> As username, is isc OK, or would you like to have something else? >> >> isc is fine for us. >> >>> For ris, I suggest you to use risops. >>> >> >> shall do >> I will let you know as we get telehouse to schedule this >> >> >> Joao >> >

3 12

RIS stuff in TTM CVS repo
by Mark Santcroos 19 Jan '05

19 Jan '05

Hi all, I propose to move the above files to the /ncc/cvsroot repo. Please let me know if I can be of any help in doing that. Thanks Mark -- RIPE NCC - Delft University of Technology - The FreeBSD Project marks(a)ripe.net - m.a.santcroos(a)ewi.tudelft.nl - marks(a)freebsd.org

4 6

[henk@ripe.net: Fwd: Re: [Fwd: Cross-console for RIS box - F root in NYC]]
by Arife Vural 17 Jan '05

17 Jan '05

Hi Joao, Sorry for the late reply. That sounds good. Do you think you can do the cabling over there? I ask OPS to create an account on RIS box, and you can get the console through this user. As username, is isc OK, or would you like to have something else? For ris, I suggest you to use risops. Regards. Arife >>>-------- Original Message -------- >>>Subject: Cross-console for RIS box - F root in NYC >>>Date: Tue, 11 Jan 2005 16:33:23 +0100 >>>From: Joao Damas <Joao_Damas(a)isc.org> >>>To: andrei(a)ripe.net >>> >>>Hi Andrei, >>> >>>we are having to do strange things when accessing our F root node in >>>NYC because we do not have out-of-band console there. I know that the >>>RIS box is in the same rack as our F root node there and I wonder if >>>you are having the same issue. >>> >>>If so would you consider a cross console arrangement where we give you >>>console access through one of our boxes and you give console to us >>>through the RIS box? >>> >>>Joao >>------------------------------------------------------------------------------ >> >>Henk Uijterwaal Email: >>henk.uijterwaal(at)ripe.net >>RIPE Network Coordination Centre http://www.amsterdamned.org/~henk >>P.O.Box 10096 Singel 258 Phone: +31.20.5354414 >>1001 EB Amsterdam 1016 AB Amsterdam Fax: +31.20.5354445 >>The Netherlands The Netherlands Mobile: +31.6.55861746 >>------------------------------------------------------------------------------ >> >>Look here junior, don't you be so happy. >>And for Heaven's sake, don't you be so sad. (Tom Verlaine) ------------------------------------------------------------------------------ Henk Uijterwaal Email: henk.uijterwaal(at)ripe.net RIPE Network Coordination Centre http://www.amsterdamned.org/~henk P.O.Box 10096 Singel 258 Phone: +31.20.5354414 1001 EB Amsterdam 1016 AB Amsterdam Fax: +31.20.5354445 The Netherlands The Netherlands Mobile: +31.6.55861746 ------------------------------------------------------------------------------ Look here junior, don't you be so happy. And for Heaven's sake, don't you be so sad. (Tom Verlaine) ----- End forwarded message -----

2 1

Re: [ris-int] libbgpdump and autoconf
by James Aldridge 17 Jan '05

17 Jan '05

Lorenzo Colitti wrote: > Hi James, > > the version of libbgpdump in the old TTM CVS used autoconf and automake > to generate the configure script and makefiles, but in NCC CVS the > configure script and makefiles are already there. The /ncc/cvsroot version was simply imported from the current build directory. If that had the configure script and makefiles then they too were imported into CVS. James

1 0

libbgpdump and autoconf
by Lorenzo Colitti 17 Jan '05

17 Jan '05

Hi James, the version of libbgpdump in the old TTM CVS used autoconf and automake to generate the configure script and makefiles, but in NCC CVS the configure script and makefiles are already there. I thought that it would be better to use autoconf and automake in CVS and that include the configure script only in release tarballs. Do you remember if you changed this for any particular reason? I was thinking of changing it back. Cheers, Lorenzo

1 0

suggest to cancel today's RIS meeting
by Arife Vural 17 Jan '05

17 Jan '05

Hi guys, If you do not have any agenda items, I suggest to cancel today's RIS meeting. As far as I know, those issues are still in progress. Arife ----- Forwarded message from Arife Vural <arife(a)ripe.net> ----- From: Arife Vural <arife(a)ripe.net> To: ris-int(a)ripe.net Subject: Re: RIS meeting in the morning Date: Mon, 3 Jan 2005 11:35:07 +0100 Quick summary of what we discussed this morning: - James almost finished up Beacon re-addressing. He will send it out the announcement this Thu and make the changes. Arife will contact Hitesh guy to let him know about the Beacon change. - RRC14 is ready. Arife will do the announcement next week. - RRC13 is waiting new CD image. James will create the new CD image and out it online this week. Arife

1 0

Important notification from eBay.com
by aw-confirm＠ebay.com 17 Jan '05

17 Jan '05

1 0