Hi, My probe went down this morning. Probably I'm running into the issue with the USB stick. I was thinking to replace the USB stick. Are there any special requirements (size, speed, etc.) for the USB stick? -Ihsan -- ihsan@dogan.ch http://blog.dogan.ch/
Hi, every USB flash drive with 4 GB (or more) will do. See https://labs.ripe.net/Members/philip_homburg/troubleshooting-ripe-atlas-prob... Don't forget that all data on the flash drive will be destroyed. Greetings, Christian Am 13.08.2016 um 09:11 schrieb İhsan Doğan:
Hi,
My probe went down this morning. Probably I'm running into the issue with the USB stick.
I was thinking to replace the USB stick. Are there any special requirements (size, speed, etc.) for the USB stick?
-Ihsan
Hi, On Saturday, 13 Aug 2016 11:00 +0200, Estelmann, Christian wrote:
every USB flash drive with 4 GB (or more) will do. See https://labs.ripe.net/Members/philip_homburg/troubleshooting-ripe-atlas-prob...
Thanks. I have now ordered a 8 GB flash drive.
Don't forget that all data on the flash drive will be destroyed.
But it's not affecting me, as it's pulling the configuration again, right? -Ihsan -- ihsan@dogan.ch http://blog.dogan.ch/
Ihsan, You don't need to change the USB stick, just unplug from the probe, format the disk with fat32 using PC, plug back again to the probe, and you're done. Thank you Budiwijaya On Sat, Aug 13, 2016 at 6:24 PM, İhsan Doğan <ihsan@dogan.ch> wrote:
Hi,
On Saturday, 13 Aug 2016 11:00 +0200, Estelmann, Christian wrote:
every USB flash drive with 4 GB (or more) will do. See https://labs.ripe.net/Members/philip_homburg/troubleshooting-ripe-atlas-prob...
Thanks. I have now ordered a 8 GB flash drive.
Don't forget that all data on the flash drive will be destroyed.
But it's not affecting me, as it's pulling the configuration again, right?
-Ihsan
-- ihsan@dogan.ch http://blog.dogan.ch/
Hi Budiwijaya, Am 13.08.2016 um 14:44 schrieb Budiwijaya:
You don't need to change the USB stick, just unplug from the probe, format the disk with fat32 using PC, plug back again to the probe, and you're done.
Thanks for the hint. I'll try that first. -Ihsan -- ihsan@dogan.ch http://blog.dogan.ch/
participants (3)
-
Budiwijaya -
Estelmann, Christian -
İhsan Doğan