Hello dear ripe community, I am trying to resurrect a "down" status ripe v1 probe. Probe is connected to a router and is auto configured for both ipv4 and ipv6. For test purposes, ipv6 has been disabled. Facts: 1 - Probe ID: 98 2 - probe was down for ~ 1 year (sorry) 3 - from router I have both ipv4 and ipv6 connectivity. 4 - sniffing shows traffic: pings, dns queries, ssl. For 22 minutes 58 seconds dumped 3.7 megabytes. 5 - probe has old firmware - 4.030 (force upgrade?) 6 - probe is rebooting every 5 minutes ! 7 - ssl sessions (usually last less than 5 minutes) are finished by probe (sends FIN packet) 8 - probe is still down 9 - probe is natted, in the atlas interface the ipv4 is not updated 10 - last 25 connections show nothing for ipv4 (for test purposes we are ipv4 only now, earlier we had enabled ipv6, connections were logged but no data was updated) 11 - nothing in charts Please help me resurrect this baby. ;) Best Regards, Artur Russu PS Engineer TD / MCN / Mobile Packet Core Orange Moldova S. A. Tel.: +373 22 975381 Tel.: +373 691 98381 E-mail: artur.russu@orange.md This message and attached information may be confidential. It is intended only for the use of the individual or entity named above. If you have received this message in error you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited, and please immediately notify us by telephone or reply by e-mail and then promptly delete the message. Thank you for your cooperation.