Hi Dmitry! I had a very similar issue when I was using faulty and cheap USB charger: probe was somehow working and sometimes even blinking the light, but never connected to Atlas network. Please try using more powerful USB adapter -- that might help. Regards, Boris Rozenshteyn On Sun, May 26, 2013 at 10:00 AM, Дмитрий Сергеевич <sdimonius@gmail.com>wrote:
Hello!
I have problem with my probe v3 (ID 11003, FW 4520).
First i used DHCP (at Home, for tests), all was worked fine.
Then i reconfigure my probe to Static IP (by manual). Static IP necessary to install my probe 24/7/365 in server room. We don't use DHCP.
But probe can't connect to network...
I brought probe to home, connect to DHCP network. Router give IP to probe. But probe still disconnected on atlas.ripe.net at least 3 hours...
LEDs: 1 - ON 2 - OFF 3 - Slow blink 4 - ON 5 - ON
Power reset - no result. Try to change Router cfg (ip, dns, mask) - no result. Probe still disconnected.
I read, that if set static IP - probe try to test setting.
By LEDs - "Network test"? But 3+ hours "Network test"?
DHCP work correctly (Router - Zyxell Keenetic, last firmware), PC work without problems on full autoconfiguration (IP, mask, gateway, DNS)
Can you help me?
P.S. Sorry for my english, i'm from Ukraine
-- С уважением, Дмитрий Личный блог: www.weblance.com.ua Хобби: www.mukachevo.net Работа: www.dovgolit.com
