- ripe-atlas - mailman.ripe.net

Probe is offline but shown online
by Andre Heinrichs 19 Jan '20

19 Jan '20

I’ve just discovered my probe #29384 blinking frantically while the website claims it had been online for more than a day (which can’t be true as my DSL had to get a new connection with a different IP). I tried rebooting the probe but all that got me is lower values of Power-Up time in the SOS requests the probe sends every couple of minutes. From what I can guess it looks like something in RIPE ATLAS isn’t working right. Would be great if someone could have a look. TIA, Andre, Who’s trying to get some sleep now.

3 2

Probe stability tags
by Chris Amin 08 Jan '20

08 Jan '20

Dear RIPE Atlas users, Due to an error in our backend systems, the probe stability tags ("system: IPv4 Stable 30d" etc) had been gradually becoming stale over the past three months, meaning that probes were not gaining or losing these tags when they should. This has now been fixed, so probes are once again tagged appropriately. We have improved our internal monitoring so this kind of issue will be noticed more quickly next time. Apologies for any inconvenience caused. Kind regards, Chris Amin RIPE NCC

1 0

New RIPE Atlas Terms&Conditions
by Robert Kisteleki 08 Jan '20

08 Jan '20

Dear RIPE Atlas users, We'd like to inform you that a new version of the RIPE Atlas Terms & Conditions has just been published. Most changes in this version are needed for the introduction of "software probes". The new version (3.4) is available at https://atlas.ripe.net/legal/terms-conditions/ and will be effective as of 11 February 2020. Regards, Robert Kisteleki

1 0

Maintenance or incident?
by Stephane Bortzmeyer 07 Jan '20

07 Jan '20

% curl https://atlas.ripe.net/ curl: (7) Failed to connect to atlas.ripe.net port 443: Connection refused It started around 1015 UTC.

4 4

A new year's break for the probes
by Robert Kisteleki 03 Jan '20

03 Jan '20

Happy new year to all RIPE Atlas users! It seems we've given a little break to our probes so they can celebrate the new year too ... >From midnight 1 January until approximately noon 2 January there were no built-in measurements running. This is due to an overlooked fact where the built-in measurements had a pre-defined end date of 2020-01-01. The system dutifully observed this date and did not schedule these measurements any more. We fixed this setting on Thursday, 2 January and the system returned to normal operations shortly thereafter. As a consequence, there's a gap in the delivered measurement results for built-in measurements (i.e. IDs < 1 million). Results for the User-Defined Measurements were not affected. Please accept our apologies for the inconvenience this can cause. Regards, Robert Kisteleki

2 2

One-off measurements not terminating
by Steve Gibbard 30 Dec '19

30 Dec '19

Hi Atlas folks, I hope you’re having a good holiday season. Sorry to interrupt it by complaining about issues. On Christmas Eve my time (early Christmas morning your time) there was an Atlas issue where any attempt at reading measurements failed with an HTTP 500 status error. That appears to have gotten fixed on Christmas (a really big thank you to whoever worked on that) but since then it appears that while most of the one-off measurements we’ve created have delivered results very quickly, none of the measurements created since 17:00 UTC on 2019-12-25 have stopped running. As shown in the Atlas portal: 23722197 Traceroute www.globaltraceroute.com (AS13335) Test Traceroute 1 one-off 2019-12-25 22:24 Never 23722089 Traceroute archive.ubuntu.com (AS41231) Test Traceroute 1 one-off 2019-12-25 19:16 Never 23722088 Traceroute sps.prima.com.ar (AS10318) Test Traceroute 1 one-off 2019-12-25 19:14 Never 23721915 Traceroute www.globaltraceroute.com (AS13335) Test Traceroute 1 one-off 2019-12-25 17:00 Never And on for every measurement between then and now. Previously, the typical one-off measurement was listed with start and stop times less than 10 minutes apart. When a user has 100 measurements running concurrently, creation of new measurements fails, which is happening for me now. If somebody could take a look at this, I’d really appreciate it. Thanks, Steve

2 3

Deletion of erroneously scheduled measurements
by Nils Rodday 29 Dec '19

29 Dec '19

Dear Atlas folks, I have accidentially scheduled many faulty measurements via the API and am now looking for a way to remove them in order to minimize unnecessary burden on the Atlas system and not to pollute my account & limits with unnecessary measurements. However, the DELETE statement (AtlasStopRequest) only seems to be able to stop ongoing measurements [1]. I always get the following reply trying to remove any future measurement: {'error': {'detail': 'That measurement cannot be stopped', 'status': 400, 'title': 'Bad Request', 'code': 104}} Also, the AtlasChangeSource & AtlasChangeRequest of Cousteau [2] can only change ongoing experiments (as I wanted to set the probes in each measurement to 1 if I wasn´t allowed to delete any of them). But since they are upcoming, but not ongoing, I could also not alter them. I am also referring to a mailing-list post from October 2013 stating essentially the same problem [3]. Given the significant amount of time that has passed since then I wanted to raise this issue again. Is there any way to delete a measurement that is in the "SPECIFIED" state, which means that it will only be executed in the future? I understand that we might want to avoid deletion of measurements that have already been run in the past in order to allow others to benefit from the results, but why shouldn´t one be allowed to eliminate faulty measurements that have been scheduled by accident in the future? Thanks & a Happy New Year! Kind regards, Nils [1] https://atlas.ripe.net/docs/api/v2/manual/measurements/stop-measurements.ht… [2] https://ripe-atlas-cousteau.readthedocs.io/en/latest/use.html [3] https://www.ripe.net/ripe/mail/archives/ripe-atlas/2013-October/001058.html

1 0

measurement page broken?
by Dave . 16 Dec '19

16 Dec '19

Hi, I just started 2 measurements like 10 minutes ago but it does seem something broke. https://atlas.ripe.net/measurements/23631307/#!probes Same issue here: https://atlas.ripe.net/measurements/23631303/#!probes I get to see a spinner instead of the results. Thanks, Dave

2 5

Letsencrypt certificates on anchors
by Anand Buddhdev 13 Dec '19

13 Dec '19

Dear colleagues, Some time ago, there was discussion on this list about deploying Letsencrypt certificates on anchors. We had said we would investigate the possibility of doing this. We are pleased to report that we have worked out how to do this seamlessly. Early next week, all RIPE Atlas anchors will switch to Letsencrypt certificates. Note that we will re-use the existing keys on the anchors to request the Letsencrypt certificates. The TLSA records of all anchors are pinned to these private keys, and so they will not change. Regards, Anand Buddhdev RIPE NCC

3 2

Anchor VM security
by Rami Al-Dalky 12 Dec '19

12 Dec '19

Hi, If someone is planning to host a VM anchor, what are the security measures that RIPE Atlas can provide? For example, protecting the VM from being compromised by an attacker. Any information about this is highly appreciated because the plan is host several anchors. Thanks, Rami

2 1