- ripe-atlas - mailman.ripe.net

Verdien 3.0.3
by Ernst J. Oud 07 Sep '23

07 Sep '23

Hi, @Chris Amin: Yes, commit c999953, version 3.0.3 completely solves this. My gratitude is larger than the losses Mr. Musk is making now that Twitter is going down the drain :-) Thanks! Regards, Ernst J. Oud

5 4

Probe issues - now recovered
by Nigel Metheringham 04 Sep '23

04 Sep '23

Probe Id 22680 This v3 probe started playing up a couple of months back but I had not had a chance to properly investigate until this weekend. Symptoms were that it disconnected and reconnected every minute or so - my August availability report was nearly 14K lines long! Packet trace showed that it was connecting to the RIPE atlas hosts on port 433 (but talking ssh), and after a minute or so was sent a FIN from the RIPE end. Tried a few things without success, so replaced the USB stick this morning, and so far (only a few hours in) that appears to have fixed the issue... The replaced USB stick was the original I got with the hardware something over 8 years back. Nigel.

2 1

Link-Local ICMP messages for Atlas probe
by Daryl Morse 03 Sep '23

03 Sep '23

I used WireShark on the WAN interface and I can confirm that the messages are all ping requests. Further, I can confirm that all of the addresses have been mangled. They are logged as fe80:5::, but the correct addresses are fe80::. I created a bug report. -----Original Message----- From: Michel Stam <mstam(a)ripe.net> Hi Daryl, Can't say I've seen it before, can the firewall be a bit too strict? I read ICMP messages, but I don't see this in the log you post. Do you have any idea what sort of ICMP messages? Regards, Michel

2 1

Link-Local ICMP messages for Atlas probe
by Daryl Morse 18 Aug '23

18 Aug '23

I've been hosting an Atlas probe since February 2019. I have native dual-stack gigabit fibre internet service and my router is pfSense. Recently, I noticed that there are hundreds of messages in the log of the router like the following: Aug 12 22:38:54 kernel cannot forward src fe80:5::1cce:5fff:fe02:61b6, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 22:36:06 kernel cannot forward src fe80:5::e65d:370f:fc45:b5ba, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 22:11:31 kernel cannot forward src fe80:5::3c01:20ff:fee5:f601, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 17:45:08 kernel cannot forward src fe80:5::2a0:a50f:fcdb:db7c, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 15:47:09 kernel cannot forward src fe80:5::2a0:a50f:fcb9:c28e, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 08:13:04 kernel cannot forward src fe80:5::2a0:a50f:fc8a:8134, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 06:55:33 kernel cannot forward src fe80:5::bac2:530f:fc39:164a, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 03:39:05 kernel cannot forward src fe80:5::2a0:a50f:fc8a:85c0, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 01:17:54 kernel cannot forward src fe80:5::e6fc:820f:fcea:2016, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 12 00:55:09 kernel cannot forward src fe80:5::ee9e:cd0f:fc0d:79d4, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 11 15:47:11 kernel cannot forward src fe80:5::4271:830f:fce5:7fa, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 11 15:25:42 kernel cannot forward src fe80:5::bac2:530f:fcd4:fdd2, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 11 07:33:53 kernel cannot forward src fe80:5::cd08:c204:cc63:2d32, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 11 06:17:19 kernel cannot forward src fe80:5::fe33:420f:fcdc:5932, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 11 04:49:00 kernel cannot forward src fe80:5::7e25:860f:fc44:6742, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 22:41:25 kernel cannot forward src fe80:5::9ca0:15ff:fe87:842e, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 14:38:59 kernel cannot forward src fe80:5::c80a:daff:fe92:b8b7, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 10:55:07 kernel cannot forward src fe80:5::2a0:a50f:fc8a:6ea0, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 08:57:19 kernel cannot forward src fe80:5::46aa:500f:fceb:ad66, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 05:47:09 kernel cannot forward src fe80:5::b68a:5f0f:fcb2:1040, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 03:24:58 kernel cannot forward src fe80:5::2a0:a50f:fcb6:5ea2, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 03:08:55 kernel cannot forward src fe80:5::2a0:a50f:fc90:9d4, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 00:17:07 kernel cannot forward src fe80:5::e65d:370f:fc44:15ba, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 Aug 10 00:07:07 kernel cannot forward src fe80:5::2a0:a50f:fcb7:7c, dst 2001:569:585f:b00:1:b3ff:fedd:9f24, nxt 58, rcvif hn0, outif hn1 The messages occur in groups of three, spaced a few seconds apart. All of the messages start with fe80:5. Even if I strip off the "5", none of them seem to convert into MAC addresses, so I can't use that to figure out what type of device is pinging the probe. There are no entries in the NDP table corresponding to these messages. I have no idea how long this has been happening. I only noticed it when I was setting up a new server to host pfsense. My probe is RIPE-Atlas-Probe-52209. I'm interested to know if anyone else has experienced this.

5 9

repeating v2 probe usb failure
by Randy Bush 16 Aug '23

16 Aug '23

probe 25898 had a usb failure. i did the unplug usb, power cycle, wait, replug usb. it worked for most of a day and then failed again. rinse repeat. oops, this last time, it has yet to return. can i just order a usb off the net and replace it? or do i just replace the unit? randy

5 6

Probe with ever changing upstreams/ASs?
by Carsten Schiefner 04 Aug '23

04 Aug '23

All - I wonder whether this is a good idea or rather a really bad one... I have a free port on a Freifunk router where I could plug in a RIPE Atlas probe. Freifunk is a community where you - amongst other things - can offer a bit of your bandwidth to "the world". This connectivity sharing however is set up as a tunnel to various ISPs (for-profit companies and non-profit associations) as these would enjoy the "provider privilege": that in short is not to be held accountable for e.g. copy right infringements etc. ("Störerhaftung"). Anyhow: as part of this tunnel setup, the other end of the tunnel changes every 24 to 48 hours - and so does the upstream and therefore also the AS of the upstream provider. And now I am asking myself: a probe with ever changing upstreams/ASs - shall such an addition to the RIPE Atlas network be considered a fault or a feature? Any comments, anybody? Cheers, -C.

3 3

System tag
by Ernst J. Oud 04 Aug '23

04 Aug '23

I noticed that the system tag “IPv4 stable 1d” is gone from my probe at: https://atlas.ripe.net/probes/1005104/ I use that tag as a criteria to select active orobes for measurements. But I noticed that my own probe was not included in my measurements. Which is weird since my probe has been online for 2.5 days (normally it is more stable, but my ISP had a small downtime). So my question is what triggers this tag? The tag is self explanatory but what does “stable” mean? Regards, Ernst J. Oud

3 3

Re: [atlas] Probe with ever changing upstreams/ASs?
by Ponikierski, Grzegorz 03 Aug '23

03 Aug '23

+ripe-atlas Regards, Grzegorz From: "Ponikierski, Grzegorz" <gponikie(a)akamai.com> Date: Thursday, 3 August 2023 at 17:49 To: Carsten Schiefner <carsten(a)schiefner.de> Subject: Re: [atlas] Probe with ever changing upstreams/ASs? Hi! It depends on use case. For me, such probe would be fine for one-off measurements but for continuous measurements I would filter out such probe to avoid noise in data. However, when I looked on freifunk.net map I noticed that this network span across Germany, Switzerland, and Austria so even for one-off measurements usage of such probe is questionable because I never know where remote end of the tunnel is. If I understand correctly it can jump from country to country every day. In other words, such probe would be tricky to handle and user will have to be aware how such probe behave to properly handle data generated by it. Probably new system tag would be needed to mark such exotic probe. Regards, Grzegorz From: Carsten Schiefner <carsten(a)schiefner.de> Date: Thursday, 3 August 2023 at 15:07 To: "ripe-atlas(a)ripe.net" <ripe-atlas(a)ripe.net> Subject: [atlas] Probe with ever changing upstreams/ASs? All - I wonder whether this is a good idea or rather a really bad one... I have a free port on a Freifunk router where I could plug in a RIPE Atlas probe. Freifunk is a community where you - amongst other things - can offer a bit of your bandwidth to "the world". This connectivity sharing however is set up as a tunnel to various ISPs (for-profit companies and non-profit associations) as these would enjoy the "provider privilege": that in short is not to be held accountable for e.g. copy right infringements etc. ("Störerhaftung"). Anyhow: as part of this tunnel setup, the other end of the tunnel changes every 24 to 48 hours - and so does the upstream and therefore also the AS of the upstream provider. And now I am asking myself: a probe with ever changing upstreams/ASs - shall such an addition to the RIPE Atlas network be considered a fault or a feature? Any comments, anybody? Cheers, -C. -- ripe-atlas mailing list ripe-atlas(a)ripe.net<mailto:ripe-atlas@ripe.net> https://urldefense.com/v3/__https://lists.ripe.net/mailman/listinfo/ripe-at…<https://urldefense.com/v3/__https:/lists.ripe.net/mailman/listinfo/ripe-atl…>

1 0

Requesting Credits for Research
by Alex Gamero-Garrido 29 Jul '23

29 Jul '23

Hi folks, My name is Alexander Gamero-Garrido and I'm a 5th year PhD student at CAIDA, UC San Diego. We're soon launching a large traceroute campaign for research and could use your generous donation of credits. We'll need about 150 million credits, but any partial amount that gets us closer to that goal is welcome and greatly appreciated. My account is agamerog at eng.ucsd.edu Thank you, Alex -- *Alex Gamero-Garrido* *PhD Student, Computer Science* Web: cseweb.ucsd.edu/~agamerog Center for Applied Internet Data Analysis (CAIDA) San Diego Supercomputer Center UC San Diego Pronouns: He/Him/His <https://inboxwhenready.org/?utm_campaign=signature&utm_medium=email&utm_sou…> I'm using Inbox When Ready <https://inboxwhenready.org/?utm_campaign=signature&utm_medium=email&utm_sou…> to protect my focus.

13 15

Re: [atlas] RIPE Atlas Virtual Anchor Registration for DCS1 (sg-sin-as37989)
by Sanjeev Gupta 28 Jul '23

28 Jul '23

Hi, I am trying to install the virtual anchor of the ISO. Unfortunately, my experience with Unix went directly from Sun to Debian in the late 90s, so I am not sure of the intricacies of RHEL anaconda What (and in what format) do I answer here: 1. IPv4 address: 203.123.48.20 2. IPv4 Netmask: I tried 255.255.255.224, which it seemed not to like, so I tried /27, and then 27. 3. IPv4 gateway: 203.123.48.6 4. IPv6 address: 2405:fc00::20 (it keeps failing, should I enclose this in [] )? 5. IPv4 Netmask: I tried /64, and then 64 6. IPv4 gateway: 2405:fc00::6 Now it fails with: <snip>freedektop.NetworkManager.Settings.Connection.MissingPropert: ipv4.addresses: this propery cannot be empty for 'method=manual' And how do I backspace in the installer? Neither BKSP nor ^H seem to work. Thanks, -- Sanjeev Gupta +65 98551208 http://www.linkedin.com/in/ghane On Thu, 27 Jul 2023 at 22:22, RIPE Atlas <no-reply(a)ripe.net> wrote: > Dear Sanjeev Gupta, > > Thank you for registering the technical information for your RIPE Atlas > virtual anchor! > > Your FQDN is: sg-sin-as37989.anchors.atlas.ripe.net > > You will need now to setup the Virtual Machine according to these > instructions: (https://atlas.ripe.net/docs/anchor-installation-vm/). > > It is important that once you have setup the virtual machine, you log in > to your RIPE Atlas account, go to the "My Atlas" menu and then "Anchors", > and check the boxes “Software is installed” and "Anchor is connected to the > network" so we are notified and can begin the tests. Please note that your > anchor will not be fully activated until we have finished these internal > tests. > > We will notify you once we have finished testing and your virtual anchor > is ready to use. > > If you have any questions, please do not hesitate to contact us at > atlas(a)ripe.net > > You registered the following details: > > IPv4 address: 203.123.48.20 > IPv4 ASN: 37989 > > IPv6 address: 2405:fc00::20 > IPv6 ASN: 37989 > > Kind regards, > > RIPE Atlas Team >

2 1