- ripe-atlas - mailman.ripe.net

Tweaking RRDs for built-in measurements UPDATE
by Pavel V. Veselovskiy 06 Feb '12

06 Feb '12

Hello, For our purposes, we use RRD image generator and get plots from the different probes. We used the recommendations that described on this page: http://atlas.ripe.net/doc/api . We found, that this information is not actual. So we would like to suggest you to update it: • probe ID < 500: zpm01.atlas.ripe.net. • probe ID >= 500 and probe ID < 1000: zpm02.atlas.ripe.net. • probe ID >= 1000 and probe ID < 2000: zpm03.atlas.ripe.net. • probe ID >= 2000 and probe ID < 3000: zpm04.atlas.ripe.net. In addition, it would be nice if the page with the documentation will contain more extensive and detailed information about the API. -- Thanks in advance & Best Regards -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- Pavel Veselovskiy Email: pavelveselovskiy(a)gmail.com Phone: +7 927 686 12 32

3 2

Minor spelling error on probe settings popup
by Richard Craven 05 Feb '12

05 Feb '12

Hello Looking at http://atlas.ripe.net/atlas/myprobes.html and going to Probe's settings | notifications, it says "if downtime longer then (minutes):" but it should say "if downtime longer than (minutes):" "than", instead of "then". Best wishes

1 0

Transfer graphs
by Roman Mamedov 03 Feb '12

03 Feb '12

Hello, Is there any logic in the placement of the upper two graphs? http://ompldr.org/vY2xhZQ/2012-02-02T155731Z-atlas.png Looks like they were dropped randomly somewhere onto the page, without any concern of how they would fit with the rest of the content. -- With respect, Roman ~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Stallman had a printer, with code he could not see. So he began to tinker, and set the software free."

4 4

Possible issue with DNS/tests getting stuck?
by Kyriacos Sakkas 27 Jan '12

27 Jan '12

Dear all, I have a statically configured probe, FW version 4270. If the internet connection goes down/flaps the probe seems to get confused and stops communicating (is shown as Down) even when the connection is back up and stable, but can actually be pinged etc from inside and outside my network fine. I have a second probe that is on DHCP (FW 4280) on a different network, this one seems not to have the same issue, don't know which is the important differentiator. Wondering if anyone has similar issues and a solution other than switch it off and on again. Thanks to All, Kyriacos

2 2

Survey results on Atlas open-sourcing
by Richard L. Barnes 05 Jan '12

05 Jan '12

The brief survey I put out a couple weeks ago has gotten 34 responses. The response rate seems to be tailing off, so I've closed the survey. Here's a summary of results. First, the simple things: -- All but one respondent is an Atlas probe host. -- Respondents preferred source to binary release 26:4 (4 abstentions) The responses as to reasons for wanting the Atlas platform opened up are a little more challenging to read. There were four options that respondents, from which respondents could choose as many as they wanted. 0 - I'm not interested in RIPE NCC releasing the Atlas firmware 1 - So that parties other than RIPE to build probes that can feed into the Atlas system 2 - So that I can easily build Atlas-like probes for my own, independent measurement network 3 - So that I can re-use some Atlas features for a non-measurement-related purpose The response patterns, ordered by frequency Pattern Frequency 1 8 2+3 6 0 5 1+2 3 1+2+3 3 2 3 3 1 (who noted: "I don't care too much") Respondents could also fill in an "other" response for their reason. There were two major themes to these responses: -- Security, in the sense both of making the device more secure, and of assuring probe hosts of what the device is doing -- Contributions, i.e., that the community could contribute to probe development One respondent also noted in an "other" response that responses 1 and 2 are not necessarily mutually exclusive; a modified probe could feed both the RIPE system and a private system. Analyze as you will :) --Richard

8 14

Probe location
by Rodolfo kix Garcia 29 Dec '11

29 Dec '11

Hi, what's the method to set the probe location? When I set up my probe, I locate it in the nearest subway station (of course, is not there), but now in the map the probe is too near of my home. The probe location is moved about 300 meters. Are you using other method to locate the probe (IP addresses, Google wifi map,...)? Cheers. kix -- ||// //\\// Rodolfo "kix" Garcia ||\\// //\\ http://www.kix.es/

2 1

Reasons to celebrate - passed 1K active probes :)
by Vesna Manojlovic 28 Dec '11

28 Dec '11

Hi everyone, *you* are part of our big success: more then 1024 probes before the end of this year! We've published an article on Labs about that yesterday: https://labs.ripe.net/Members/becha/ripe-atlas-has-reasons-to-celebrate Thank you very much for participating in this exciting project, and Happy New Year! Vesna

8 19

Happy UDM & Happy New Year :)
by Vesna Manojlovic 23 Dec '11

23 Dec '11

Dear all, One more article on RIPE Labs: about User Defined Measurements: https://labs.ripe.net/Members/becha/happy-beta-testers-of-atlas-udm Thank you for your feedback and contribution! Regards, Vesna

1 0

New measurement target suggestion: 6to4 anycast
by Roman Mamedov 21 Dec '11

21 Dec '11

Hello, I'd like to suggest adding to the list of monitored addresses a new one: 192.88.99.1 - 6to4 anycast IPv4 to IPv6 gateway; https://en.wikipedia.org/wiki/6to4 https://tools.ietf.org/html/rfc3068 This could provide interesting data on what percentage of networks have this address blocked/inaccessible (resulting in broken operation of 6to4), and also what is the average latency to the closest 6to4 gateway across various countries/regions. The next step would possibly be the collection of statistics which ASes 'see' whose 6to4 gateways, this can be inferred from the AS of the traceroute hop that is right before the 192.88.99.1 on the trace. -- With respect, Roman ~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Stallman had a printer, with code he could not see. So he began to tinker, and set the software free."

4 3

Algortithm for probe detecting its offline
by Greg B - NANOG 20 Dec '11

20 Dec '11

Hi, I wanted to ask what is the algorithm / methodology used for a probe detecting / reporting it is offline? I ask, because this morning I intentionally rebooted my cable modem on the network the probe is attached to, which brought my internet down for about 1-2 minutes (I was using the internet immediately after the cable modem re-synched), but the probe is reporting that outage as a 29 minute outage rather than a few minutes. Any comments on why there should be such a large variance from my actual experience versus what the probe saw? -Greg

2 1