- ripe-atlas - mailman.ripe.net

tracing from anchor nodes
by Klaus Darilion 02 Jul '14

02 Jul '14

Hi! According to DNSMON [1] r.ns.at IPv4 is not reachable from us-bos-as11488. Are there any tools available to analyse the problem from the anchor? E.g. performing a traceroute from the respective anchor node? Thanks Klaus [1] https://atlas.ripe.net/dnsmon/group/at.?dnsmon.session.color_range_pls=0-66…

3 3

Paris-traceroute variations
by Juan Antonio Cordero Fuertes 30 Jun '14

30 Jun '14

Not sure this is the right place to ask this... sorry if it is not. I'm trying to configure Paris-traceroute measurements, and it is not clear for me what is the meaning of the *paris* parameter. In https://atlas.ripe.net/docs/udm/ it is said that it corresponds, for values from 1 to 16, to "the number of variations to be used for a Paris traceroute <http://www.paris-traceroute.net/>". What is this? Does it correspond to the number of initial probes to be used by paris-traceroute? I am unable to figure it out from the RIPE Atlas docs... any indication would be appreciated. Thanks, Juan Antonio Cordero

5 8

IPv6 ICMP - denied packets
by Joachim Tingvold 24 Jun '14

24 Jun '14

Hi, I recently installed a probe at home, and now my router spits out loads of 'denied icmpv6'-messages. After going through the logs for the last two days, I have ~1900 entries of denies towards the probe -- all of them more or less like this (with different source); ### Jun 22 2014 22:30:22.863 CEST: %IPV6_ACL-6-ACCESSLOGDP: list ipv6-inbound/2100 denied icmpv6 2A01:4F8:130:24A4::13:76 (Po1.102) -> {PROBE-IPV6-ADDRESS} (1/4), 8 packets ### I've got an ACL applied ingress on the link to my ISP, and the relevant part is shown below; ### ipv6 access-list ipv6-inbound sequence 2000 permit icmp any any echo-reply sequence 2005 permit icmp any any echo-request sequence 2010 permit icmp any any packet-too-big sequence 2015 permit icmp any any time-exceeded sequence 2020 permit icmp any any destination-unreachable sequence 2025 permit icmp any any parameter-problem sequence 2100 deny icmp any any log-input ### This ACL conforms to RFC4890[1] (except the Mobile IPv6 part). Of the 1900 entries, all of them are ICMPv6 type 1. ~300 of them have the code bit[2] set to 1, and ~1600 of them are set to 4. These are the top sources; ### 367 2001:500:2::C 313 2001:500:2D::D 289 2A01:4F8:130:24A4::13:76 289 2001:500:3::42 196 2A01:4F8:121:30A4::78:15 161 2001:DC3::35 100 2001:7FE::53 67 2001:7FD::1 60 2001:500:2F::F ### All of these are DNS root servers (except those starting with 2A01:4F8, which are some Atlas-thingies). It seems to me that the Atlas-probe sends quite some amount of ICMPv6-packets to the root DNS-servers (and even Atlas' own boxes), that are being returned with errors. Why does the probe do this, and does it actually rely on these replies? [1] <http://www.ietf.org/rfc/rfc4890.txt> [2] <http://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xml#icm…> -- Joachim

3 3

AFRINIC (MU) has joined RIPE Atlas anchors
by Michela Galante 18 Jun '14

18 Jun '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called mu-plu-as327681 and it is hosted by AFRINIC in Port Louis, Mauritius. This is the third anchor hosted by an RIR on behalf of the RIPE NCC. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind regards, Measurements Community Building Team RIPE NCC mcb(a)ripe.net

1 0

Selecting only anchors for UDM
by Ondřej Caletka 12 Jun '14

12 Jun '14

Hello list, is there a way to run an UDM on Anchors only? I think it would be a good feature, especially for precise latency measurement. Cheers, Ondřej Caletka

10 18

Using RIPE Atlas to Debug Network Issues
by Vesna Manojlovic 12 Jun '14

12 Jun '14

Dear colleagues, Please find the use-case for RIPE Atlas in debugging network issues, in this RIPE Labs article written by Tim Kleefass from BelWü, who is hosting a RIPE Atlas anchor. (and who holds the record for the shortest time from purchasing the anchor to it going live!) https://labs.ripe.net/Members/tim_kleefass/how-fast-the-ripe-atlas-anchor-h… Regards, Vesna

1 0

Speed tests?
by Brian Rak 11 Jun '14

11 Jun '14

Are there any plans to allow testing download speed from the probes? I guess this could cause problems for people who have the probes on metered bandwidth plans.

12 12

Lemuria Communications (US) has joined RIPE Atlas anchors
by Michela Galante 10 Jun '14

10 Jun '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called us-dal-as7366 and it is hosted by Lemuria Communications in Dallas, United States. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind regards, Measurements Community Building Team RIPE NCC mcb(a)ripe.net

1 0

Empty from feild
by john 06 Jun '14

06 Jun '14

Hello All, Quick question about the data format. What would cause a measurement to have an empty from field but contain data? An example would be probe_id 13663 from measurement 1672218[1]. A cursory glance seems to happens a lot more with V6 Thanks John [1]https://atlas.ripe.net/api/v1/measurement-latest/1672218/

3 4

NTT Communications (US, Seattle and Atlanta) have joined RIPE Atlas anchors
by Michela Galante 06 Jun '14

06 Jun '14

Dear RIPE Atlas users, We're happy to announce that two more RIPE Atlas anchors have joined the network and are now available as targets for probe hosts conducting their own user-defined measurements. The new anchors, both hosted by NTT Communications in United States, are: us-sea-as2914, in Seattle us-atl-as2914, in Atlanta Congratulations to NTT Communications for their third and forth anchor online! Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards these anchors from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind regards, Measurements Community Building Team RIPE NCC mcb(a)ripe.net

1 0