- ripe-atlas - mailman.ripe.net

Many thanks :)
by Mike. 01 Dec '14

01 Dec '14

A short note to say 'thank-you' for the ability to configure the origination of an email message when the probe under my supervision has been offline for a short while. I was doing some work on my firewall today, and I neglected to re-plug the probe back into the USB port for power. The email informed me of my transgression. :) Mike.

3 2

Wikimedia Foundation (San Francisco, US) has joined RIPE Atlas anchors
by Michela Galante 01 Dec '14

01 Dec '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is us-sfo-as14907 and it is hosted by Wikimedia Foundation in San Francisco, United States. Congratulations to Wikimedia Foundation for their third anchor online! Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Software Probs
by Shahin Gharghi 29 Nov '14

29 Nov '14

Dear RIPE Atlas team I want to ask why don't you make software probes? RIPE NCC have to spend a lot of money on RIPE Atlas. They can easily make RIPE Atlas VMWare image or an RPM,deb package and even windows service. So people can install them on their servers. The other way to save probes is making probes multi-home. For example I have 4 probes in one place to monitor 4 different IP prefixes and paths. I know because of the hardware limits we can't use sub-interfaces but we can set 4 IP addresses manually and add 4 any route by the source, then we can save 3 other probes. -- Shahin Gharghi

5 5

MIX (IT) has joined RIPE Atlas anchors
by Michela Galante 27 Nov '14

27 Nov '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called it-mil-as16004 and it is hosted by Milan Internet eXchange (MIX) in Milan, Italy on behalf of RIPE NCC since they are one of our k-root hosts and RIS Remote Route Collector locations. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind regards, Measurements Community Building Team RIPE NCC mcb(a)ripe.net

1 0

Wikimedia Foundation (Carrollton, US) has joined RIPE Atlas anchors
by Michela Galante 26 Nov '14

26 Nov '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called us-cax-as14907 and it is hosted by Wikimedia Foundation in Carrollton, United States. Congratulations to Wikimedia Foundation for their second anchor online! Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Wikimedia Foundation (United States) has joined RIPE Atlas anchors
by Alastair Strachan 26 Nov '14

26 Nov '14

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called us-qas-as14907 and it is hosted by Wikimedia Foundation in Ashburn, United States Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

2 1

Be careful with probe 4981
by Thomas Holterbach 24 Nov '14

24 Nov '14

Hi, I am going to perform some tests on our atlas probe (id 4981, ASN 3130) during the next two or three weeks. Please note that during this period, measurements from or toward this probe might be inaccurate. Thank you for your attention, Thomas

1 1

Fwd: [AFRINIC-announce] AFRINIC-RIPE Atlas Initiative
by Vesna Manojlovic 21 Nov '14

21 Nov '14

FYI -- Cooperation between AfriNIC & RIPE NCC / RIPE Atlas. Vesna -------- Original Message -------- Subject: [AFRINIC-announce] AFRINIC-RIPE Atlas Initiative Date: Fri, 21 Nov 2014 17:33:48 +0400 From: AFRINIC Communication <comm-announce(a)afrinic.net> To: announce(a)afrinic.net Dear Members/Colleagues, Following the MoU signed with the RIPE NCC in Abidjan, AFRINIC has launched an initiative to increase the number of probes and anchors in the AFRINIC service region. The “AFRINIC/RIPE Atlas Initiative” aims to support Internet measurements both globally and within our region. We are therefore relying on our members' support to help us build this network. We would also like take this opportunity to thank all those members who are already hosting probes and anchors and are keeping them online. How to Get Your AFRINIC/RIPE Atlas Probe ------------------------------------ For those who would like to support this initiative, AFRINIC and the RIPE NCC have implemented a new channel of distribution to make it easier for AFRINIC members to apply and receive their probe. If you would like to apply to host a probe, all you need to do is register online and make a request. After evaluation by the AFRINIC/RIPE NCC Atlas Team, probes will be shipped directly to successful applicants. Please note that this initiative is exclusively for AFRINIC members. More Information -------------- More information about the initiative and how to apply for and host a probe can be found athttp://www.afrinic.net/en/initiatives/afrinicripe-atlas If you are attending the AFRINIC-21 Meeting taking place from 22-28 November in Mauritius, you can also ask any AFRINIC staff member for more information about this initiative. Kind regards, AFRINIC Communications Team ................................... Chers membres/collègues, Suite au protocole d'accord signé avec le Registre Internet Regional Europeen, RIPE NCC, à Abidjan, AFRINIC a lancé une initiative visant à accroître le nombre de sondes Atlas dans la région de service d'AFRINIC. L'initiative "AFRNIC -RIPE Atlas " vise à soutenir les mesures de l'Internet au niveau mondial et au sein de notre région. Nous comptons donc sur le soutien de nos membres pour nous aider à construire ce réseau. Nous profitons de l'occasion pour remercier les membres qui hébergent déjà des sondes tout en les gardant en ligne. Comment obtenir votre sonde Atlas. Pour ceux qui sont prêts à soutenir cette initiative, AFRINIC et RIPE NCC ont mis en place une nouvelle chaîne de distribution pour les membres d'AFRINIC qui peuvent facilement faire une application et obtenir leurs sondes. Si vous souhaitez héberger une sonde, tout ce que vous devez faire est de vous inscrire en ligne et soumettre votre demande. Apres évaluation par l'Equipe d'AFRINIC-RIPE Atlas, les sondes seront directement envoyés aux candidats selectionnés par l’Equipe du projet. Plus d'informations ...................................... Plus d'informations sur l'initiative et comment faire une application pour héberger une sonde à :http://www.afrinic.net/en/initiatives/afrinicripe-atlas Si vous participez à la Réunion d'AFRINIC-21, qui se tiendra du22-28 novembre à Maurice, vous pouvez contacter le personnel d'AFRINIC pour plus d'informations sur cette initiative. L'Equipe de Communication d'AFRINIC _______________________________________________ announce mailing list announce(a)afrinic.net https://lists.afrinic.net/mailman/listinfo.cgi/announce

1 0

Using Atlas for Monitoring of Anycast DNS
by Klaus Darilion 21 Nov '14

21 Nov '14

Hi! I want to monitor an Anycasted authoritative name server: - are all nodes responding - are all nodes in routing ... So I thought about starting a long term DNS measurement with plenty of probes and NSID queried. Then, checking the results I should see every possible NSID if there are for more probes than Anycast-nodes. Does anybody have done that (or similar) already and want to share code? Can the RIPE Atlas Status Checks be used for such monitoring? Thanks Klaus

5 7

Maximum daily spending limit reached
by Ruwaifa Anwar 20 Nov '14

20 Nov '14

I'm getting this error:- "Executing this measurement request would violate your maximum daily spending limit of 1000000.0 credits". I have double checked my request. It's expected credit consumption is way less than daily limit and I don't have any other UDM running. Is there a bug in v1 API? _______________________ Regards, Muhammad Ruwaifa Anwar

3 2