- ripe-atlas - mailman.ripe.net

[ietf-secretariat@ietf.org: New Non-WG Mailing List: hops -- Measuring deployability of new transport protocols]
by Stephane Bortzmeyer 26 Feb '15

26 Feb '15

It could be interesting to use Atlas probes for such measurements, no?

2 1

Re: [atlas] Fwd: Re: Proble locations (Changed because of Geo-IP)
by Chris Amin 25 Feb '15

25 Feb '15

Dear Martin, I'm sorry for this, we recently made a change which keeps the location of those probes which are geolocated (i.e. *without* a manually set address) up to date. Previously such probes were geolocated once, and never again. It was never the intention to overwrite manually given locations. Unfortunately, it seems that a number of probes were erroneously marked as being automatically geolocated when in fact their owners had carefully provided a location. We are now looking at our logs to see how many probes might have been affected by this, and whether we can automatically revert the location in those cases. As for your point about not being able to enter the location, there is a text box above the map popup which should allow you to enter a textual address. If this isn't working for you, please let me know. Apologies once again. Kind regards, Chris Amin RIPE NCC On Wed, 25 Feb 2015 01:10:30 -0800 (PST), Martin Winter wrote: > I have actually the address in it. > The earlier webpage had a way to enter Lat/Lon for probes (which I can't > find anymore). > > I think a simple Geo-Lokup based on addresses in description would have > done a much better job. > But a field to enter lat/lon in it and take this as a preference (if > entered) without going to overwrite it would be a good start. > > I mainly worry on whatever happend there in this process may have > misplaced a lot of probes to the wrong location. > Anyone else noticed that their probe moved to a new (wrong) location? > > - Martin > > > On Wed, 25 Feb 2015, Grewal, Jas wrote: > >> Agreed, how about including this critical information in the >> description field to get around this, perhaps? >> >> -----Original Message----- >> From: ripe-atlas [mailto:ripe-atlas-bounces@ripe.net] On Behalf Of >> Martin Winter >> Sent: 25 February 2015 07:29 >> To: ripe-atlas(a)ripe.net >> Subject: [atlas] Proble locations (Changed because of Geo-IP) >> >> So I've noticed that (at least some) probes got the location >> automatically updated based on Geo IP. >> However, this is frequently fundamentially broken. One of my probe >> moved from San Jose, CA to somewhere in the middle of Texas. (Broken >> Geo-IP location for AT&T DSL users). >> (The example I talk about is proble #10770) >> >> Kind of sad... not sure how many had this happening. Specially as I >> took care to put the exact lat/lon in the User interface in the past. >> Now I can only reposition it by dragging on a map - and that seems to >> be broken as well (at least it fails to save when I try to correct >> this probes location on Chrome) >> >> I wonder how many and why there was a decision to change the location. >> I think the location were much better before they got force-changed. >> >> - Martin Winter >> >> >> >> > > > > >

2 1

FastVPS Eesti OU (Jõhvi, Estonia) has joined RIPE Atlas Anchors
by Alastair Strachan 25 Feb '15

25 Feb '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called ee-jvi-as198068 and it is hosted by FastVPS Eesti OU in Jõhvi, Estonia. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ <https://atlas.ripe.net/anchors/list/> Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ <https://atlas.ripe.net/about/anchors/> Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Delta Softmedia Ltd (Sofia, Bulgaria) has joined RIPE Atlas Anchors
by Alastair Strachan 25 Feb '15

25 Feb '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called bg-sof-as197216 and it is hosted by Delta Softmedia Ltd in Sofia, Bulgaria. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ <https://atlas.ripe.net/anchors/list/> Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ <https://atlas.ripe.net/about/anchors/> Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Proble locations (Changed because of Geo-IP)
by Martin Winter 25 Feb '15

25 Feb '15

So I've noticed that (at least some) probes got the location automatically updated based on Geo IP. However, this is frequently fundamentially broken. One of my probe moved from San Jose, CA to somewhere in the middle of Texas. (Broken Geo-IP location for AT&T DSL users). (The example I talk about is proble #10770) Kind of sad... not sure how many had this happening. Specially as I took care to put the exact lat/lon in the User interface in the past. Now I can only reposition it by dragging on a map - and that seems to be broken as well (at least it fails to save when I try to correct this probes location on Chrome) I wonder how many and why there was a decision to change the location. I think the location were much better before they got force-changed. - Martin Winter

2 2

New on RIPE Labs: Stopping Support for Internet Explorer 8 on Windows XP in RIPE Atlas and RIPEstat
by Mirjam Kuehne 24 Feb '15

24 Feb '15

Dear colleagues, Microsoft ended support for Windows XP as of April 2014. We're about to change RIPE Atlas and RIPEstat to stop support for Internet Explorer 8 running on these systems. Please find some more information on RIPE Labs: https://labs.ripe.net/Members/kistel/stopping-support-for-internet-explorer… Kind regards, Mirjam Kuehne RIPE NCC

1 0

Brno University of Technology (CZ) has joined RIPE Atlas anchors
by Vesna Manojlovic 20 Feb '15

20 Feb '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called cz-brq-as197451 and is hosted by Brno University of Technology in Czech Republic. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ Thank you for participating in RIPE Atlas! Kind regards, Vesna Manojlovic Measurements Community Building Team RIPE NCC

1 0

Sagan: 'Response' object has no attribute 'edns0'
by Paul Vlaar 19 Feb '15

19 Feb '15

Hi all, I'm trying to do some basic DNS UDM result parsing using Sagan. I'd like to have an easy way to extract the NSID. I followed the instruction found here: https://www.ripe.net/ripe/mail/archives/ripe-atlas/2014-May/001475.html 'from ripe.atlas.sagan import Result result = Result("your-JSON-result-blob-here") print(result.responses[0].edns0.options[0].nsid)' That didn't work, as I get: AttributeError: 'Result' object has no attribute 'responses' So I figured I need to use a DnsResult, instead. I then have the following Python code: from ripe.atlas.sagan import DnsResult import json url = "https://atlas.ripe.net/api/v1/measurement-latest/1873691/" results = json.load(urllib.urlopen(url)) for probe in results: sagan_result = DnsResult(results[probe][0]) print(sagan_result.responses[0].edns0.options[0].nsid) This gives me: print(sagan_result.responses[0].edns0.options[0].nsid) AttributeError: 'Response' object has no attribute 'edns0' After some digging through the Sagan documentation, I found out that the way to do this should be: print(sagan_result.responses[0].abuf.edns0.options[0].nsid) This might be of help to others. ~paul

1 0

problems creating measurements with old web interface
by Klaus Darilion 13 Feb '15

13 Feb '15

Hi! Today I created some DNS tests with the old web interface. The creation process was fine, but the measurements did not work. (my target was ignored and "use probe's resolver" was automatically enabled). See UDMs: 1841832, 1841839, 1841840 btw: I can not stop 1841839 and 1841840 via the new web interface The DNS measurements only work if I create them via the new web interface. regards Klaus PS: IMO the new web interface is not very user friendly when choosing the probes - eg I failed to select 100 probes word wide (how to do this in the map)? It would be nice to have a textual alternative as my browser gets incredibly slow when showing all the probes on the map.

2 3

Larsen Data ApS (Ballerup, Denmark ) has joined RIPE Atlas Anchors
by Alastair Strachan 12 Feb '15

12 Feb '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called dk-blp-as197495 and it is hosted by Larsen Data ApS based in Ballerup, Denmark. Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ <https://atlas.ripe.net/anchors/list/> Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ <https://atlas.ripe.net/about/anchors/> Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0