- ripe-atlas - mailman.ripe.net

Invalid JSON because of DNS TXT records
by Stephane Bortzmeyer 15 May '15

15 May '15

The DNS, as we know, is a jungle. People put anything in their TXT records, even control characters. Atlas faithfully returns this content in the JSON files (see measurement #2004707). Then they are no longer legal JSON (RFC 7159, section 7) and crash the JSON libraries. Who should fix it? My first guess is that Atlas should not produce illegal JSON files and therefore should escape such texts.

2 1

New on RIPE Labs: AMS-IX Outage during RIPE70 as Seen with RIPE Atlas
by Vesna Manojlovic 14 May '15

14 May '15

FYI -------- Forwarded Message -------- Subject: [mat-wg] New on RIPE Labs: AMS-IX Outage during RIPE 70 as Seen with RIPE Atlas Date: Thu, 14 May 2015 17:20:21 +0200 From: Mirjam Kuehne <mir(a)ripe.net> To: mat-wg(a)ripe.net Dear colleagues, Please find this new article on RIPE Labs including some visualisations of yesterday's AMS-IX network outage: https://labs.ripe.net/Members/kistel/the-ams-ix-outage-as-seen-with-ripe-at… Kind regards, Mirjam Kuehne RIPE NCCC

1 0

M-net Telekommunikations GmbH in Munich has joined RIPE Atlas Anchors
by Alastair Strachan 14 May '15

14 May '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called de-muc-as8767 and it is hosted by M-net Telekommunikations GmbH in Munich Germany Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ <https://atlas.ripe.net/anchors/list/> Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ <https://atlas.ripe.net/about/anchors/> Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Wikia in San Jose, USA has joined RIPE Atlas Anchors
by Alastair Strachan 06 May '15

06 May '15

Dear RIPE Atlas users, We're happy to announce that another RIPE Atlas anchor has joined the network and is now available as a target for probe hosts conducting their own user-defined measurements. The new anchor is called us-sjc-as22300 and it is hosted by Wikia in San Jose (USA) Anchoring measurements (ping, ping6, traceroute and traceroute6) are scheduled towards this anchor from all the other anchors as well as several hundred probes, providing a continual overview of regional reachability. Results of these measurements are available as raw data in JSON format, and visualised on the map and "seismograph" with many configurable features. You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ <https://atlas.ripe.net/anchors/list/> Learn more about RIPE Atlas anchors at: https://atlas.ripe.net/about/anchors/ <https://atlas.ripe.net/about/anchors/> Thank you for participating in RIPE Atlas! Kind Regards, RIPE Atlas Team

1 0

Geographic Selection of Probe
by Graham Beneke 28 Apr '15

28 Apr '15

Hi All Due to the huge number of probes in Europe there is always a heavy bias when selecting "whole world" for UDMs. In the past I could get around this by requesting numbers of probes from each region/continent. I can't figure out how to do this on the new interface. Using the wizard there does not seem to be a way to request a random subset of probes within the area selected. When using the manual probe selection I can't find what area codes I can use besides "WW" Am I missing something? -- Graham Beneke graham(a)apolix.co.za

2 1

New on RIPE Labs: Measuring Countries and IXPs in the SEE Region
by Vesna Manojlovic 24 Apr '15

24 Apr '15

Dear all, In this post we look at 10 countries in South East Europe and see how we can use RIPE Atlas to get a sense of routing and the interconnectedness of networks in these countries: https://labs.ripe.net/Members/emileaben/measuring-countries-and-ixps-in-the… Two prototype tools used here can benefit from your feedback & involvement: IXP-Jedi & OpenIPMap. Please take some time to play with the interactive grid (IXP-Jedi), e.g. for Romania: http://sg-pub.ripe.net/emile/ixp-country-jedi/RO-2015-04/ixpcountry/ Code: https://github.com/emileaben/ixp-country-jedi/ Or join the OpenIPMap to crowdsource geolocation of IP infrastructure: https://github.com/RIPE-Atlas-Community/openipmap Kind regards, Vesna

1 0

IPv6 auto-tagging failure?
by Bjørn Mork 21 Apr '15

21 Apr '15

Hello, I'm wondering a bit about the IPv6 auto-tagging. I recently reveived a v3 probe and connected it to a dual-stack enabled network. The probe was initially tagged as 2015-04-16 20:23 UTC Probe auto-tagged Your probe #22894 was automatically tagged as "system: IPv6 Capable" but then (on the next batch run?, after a couple of quick firmware upgrades (3.3.8 => 4650 => 4680): 2015-04-17 08:23 UTC Probe auto-untagged Your probe #22894 was automatically untagged as "system: IPv6 Capable" and there it has been since. This wouldn't worry me too much if it otherwise worked, but I noticed that the probe isn't listed with an "ASN v6" either. So I assume the missing tag prevents it from being used for v6 probing? AFAICS, the probe does take the announced prefix, and is actually *using* the provided IPv6 connectivity. The "Connection History" shows that it consistently uses its SLAAC address to connect to the controller. So why isn't it tagged as IPv6 capable/works etc? In desperation I tried different netwrok settings, static address, adding v6 DNS, and fiddling with the managed/other flags along with matching DHCPv6 config. Made no difference of course. If I understood correctly, the probe firmware won't currently do any DHCPv6, and v6 DNS is optional as long as there is a working v4 resolver available. Bjørn

3 2

RIPE Atlas accounting system renewal
by Robert Kisteleki 20 Apr '15

20 Apr '15

Dear Users, Today we're renewing our internal accounting system in RIPE Atlas. This change is almost exclusively internal, it hardly shows up on the public pages. If you see discrepancies regarding your credits tomorrow, then please let us know at atlas(a)ripe.net (ie. NOT this mailing list) so we can check. We'll privately contact the few users where we expect a more visible change. Regards, Robert & Johan & the rest of the team

1 0

Error when adding a measurement
by Edd Barrett 17 Apr '15

17 Apr '15

Hey, A friend offered me a v3 probe, and I am currently playing around with it, exploring what I can do. I think there may be a bug in the measurements setup process. When I try to add a measurement, I get a message: "AccBalance matching query does not exist." This is not a very user friendly message. Perhaps this is suggesting that I don't have enough credit? This leads me to another potential problem. On the landing page, after I login, there is a credit summary consisting of two icons and a kind of pie chart. If I mouseover "current balance" it says 0. If I click it, the resulting page says I have 50,000 credits (the welcome bonus). I suspect that I can't setup the measurement because some part of the system thinks I have no credit. Cheers -- Best Regards Edd Barrett http://www.theunixzoo.co.uk

2 1

Accounting switch
by Johan ter Beest 17 Apr '15

17 Apr '15

Dear Atlas users, We are in the middle of switching the accounting back-end. We expect this work to be finished by next week: Tuesday, April 21. There are two spots where you would be impacted: - Transferring credits Credits transferred will show up in the new system but not in the old. We have temporarily disabled the transferring of credits using the website. If you need to have some credits transferred urgently, you can email us at atlas-dev(a)ripe.net and we will make the transfer for you - When you register a new probe and are a first time probe host (ie, you have no credits at all) The 50.000 credits welcome bonus is applied to the new system while the measurements scheduling checks the old system resulting in an error. This is a fairly rare scenario as most of our hosts have credits already. When we spot this, we will contact the host and adjust his credits manually. There will be no danger of losing credits or measurements being stopped accidentally as a result of this switch. Thank you for your patience while we make this switch. Kind regards, Johan ter Beest RIPE Atlas Team

1 0