- ripe-atlas - mailman.ripe.net

Troubleshooting USB stick issues - reaching out
by Vesna Manojlovic 11 Jul '16

11 Jul '16

Dear colleagues, recently, some of the third version of RIPE Atlas probes have had an issue with their USB sticks. We're still investigating what may be causing this issue, and in the meantime we have a possible solution, outlined in this RIPE Labs article (and below in the email) https://labs.ripe.net/Members/philip_homburg/troubleshooting-ripe-atlas-pro… These steps might not be a surprise to the users on this list, but on the 4th of July we reached out to almost 5000 hosts of "abandoned" probes, and we see immediate positive results! As you can see from some screenshots I quickly made, number of active probes have increased - from 8883 on 1st July, to 9323 this morning. Allowing for normal fluctuations, this is still a considerable increase -- and we are grateful! Thank you for all the effort that you put into keeping the RIPE Atlas network strong by keeping your probes connected. Kind regards, Vesna (and the RIPE Atlas team) === Steps to power-cycle probe without USB stick: 1. Unplug the probe from its power source 2. Remove the USB stick from the probe 3. Plug in the probe WITHOUT the USB stick 4. Wait for ten minutes 5. Insert the USB stick After an hour, check SOS-messages & "Status" tab Note: Only on a network with working DHCP. If you have configured probe to use static IP, this setting would be lost if trying the steps. If this didn't help, try using a new, brand-name USB stick that is at least 4GB in size (it does not need any preparation but its contents will be erased so make sure it does not store anything crucial) If the problem is still there, please contact us at atlas(a)ripe.net

3 2

sometimes no RTT?
by Antranig Vartanian 08 Jul '16

08 Jul '16

Hi all! I'm new to RIPE Atlas, and right now using it for educational purposes :)) lately I've seen that some of my traceroute measurements do not have RTT. although it's not completely ignored by the hop (I get the data like from, size, ttl), but only rtt is missing :)) any idea how, why and when does this happen? :) for a live example, check Measurement #4458653. 48th probe's 11th hop's 1st query (counting from zero, btw) does not have rtt :) thanks in advance! side question: is there an (un)official IRC channel? :) -- Antranig Vartanian | PGP Key ID : 0xDAB81456 https://antranigv.am | https://cert.am (* do one thing and do it well *)

3 8

development server?
by Ollivier Robert 06 Jul '16

06 Jul '16

Hello, I've been hosting a probe for quite sometimes and now that APIv2 is out, I've writing a Go library to access it. Is there a development server I could hit instead of the regular one in order to clutter the DB with temporary/trash measurements? Thanks. -- Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto(a)keltia.net In memoriam to Ondine, our 2nd child: http://ondine.keltia.net/

3 2

Is the Atlas probe hackable?
by Hank Nussbacher 06 Jul '16

06 Jul '16

I received a report from one of our security monitoring systems about one of our probes (#17846) - https://atlas.ripe.net/probes/17846/ which appears to be infected with Tinba: > Security incident #1 - Tinba infection > Involved internal Hosts: > atlas-probe.cc.biu.ac.il 132.70.248.150 spotted since > 2016-06-30 > 23:58:54 till 2016-07-01 05:01:20 > Malicious activities found: > Tinba infection > related indication of compromise: > Communication with CnC > 192.112.36.4 > 192.203.230.10 > 192.228.79.201 > 192.33.4.12 > 192.36.148.17 > 193.0.14.129 > 198.41.0.4 > 198.97.190.53 > 199.7.83.42 > 199.7.91.13 > 202.12.27.33 Should we be worried? Thanks, Hank

4 4

Is there something up with atlas.ripe.net at the moment ?
by Steve Pointer 05 Jul '16

05 Jul '16

Hi I am trying to add a couple of new measurements, however it has been "...calculating" for about an hour now. Is there a known issue? Many Thanks Steve P -- Steve Pointer spointer(a)humdai.net

2 2

SSL Measurement shows time errors for Certs
by Paul van der Zwan 29 Jun '16

29 Jun '16

I have just created an SSL measurement with 20 probes and they all show the following error for the cert validity dates: Invalid date UTC . AFAIK the cert contains valid dates.. Any idea ? Thanks, Paul Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum

1 0

RIPE NCC Webinars - new dates
by Vesna Manojlovic 29 Jun '16

29 Jun '16

Dear colleagues, If you are interested in a RIPE Atlas webinar: - new date for summer is announced: 16.8. (below) - description & additional material is available here: https://www.ripe.net/support/training/learn-online/webinars/advanced-ripe-a… You can register on-line if you are an LIR; otherwise, please contact <training(a)ripe.net>. Regards, Vesna -------- Forwarded Message -------- Subject: [ncc-announce] [training] RIPE NCC Webinars - new dates Dear colleagues, We are pleased to announce the launch of new dates for our Webinars. The RIPE NCC Webinars are live and take only one hour. You can interact with our trainers without leaving your desk. We focus on the topics and issues most important for LIRs. Register now at https://www.ripe.net/support/training/learn-online/webinars Participation is limited to 20 people, so don't hesitate if you want to take part! If you have questions, please email <training(a)ripe.net>. We look forward to seeing you online. Kind regards, RIPE NCC Training Service

1 0

More than 200 RIPE Atlas anchors now online
by Michela Galante 29 Jun '16

29 Jun '16

Dear colleagues, Thanks to thirteen new RIPE Atlas anchors being activated over the last two months, we have now reached an important milestone: more than 200 anchors online! Learn more about what anchor measurements can do for you: https://atlas.ripe.net/anchors/about/ We have also started decommissioning anchors with older hardware and working with hosts to replace them with updated hardware. We'd like to thank Nick Hilliard for helping us test our decommissioning procedure and becoming the first anchor host to update to the new hardware for as2128, hosted by INEX in Dublin, Ireland. Since our last announcement, the following anchors have become active: - cz-brq-as24971, hosted by Master Internet s.ro.o in Brno, Czech Republic - nl-ams-as1200, hosted by AMS-IX B.V. in Amsterdam, Netherlands - ca-wtl-as4508, hosted by NeuStyle Corporation in Waterloo, Canada - ie-ork-as2128, second anchor for INEX, hosted in Cork, Ireland - lv-rix-as52048, hosted by DATACLUB S.A. in Riga, Latvia - dk-taa-as51468, hosted by One.com in Tastrup, Denmark - ie-dub-as2128, hosted by INEX in Dublin, Ireland (replaces older hardware) - us-rno-as3851, hosted by University of Nevada in Reno, United States - nl-dft-as31019, hosted by Meanie in Delft, Netherlands - ru-mot-as13238, hosted by Yandex LLC in Mytishchi, Russia - de-bwe-as680, hosted by TU Braunschweig, Gauss-IT-Zentrum in Braunschweig, Germany - nl-ams-as35733, hosted by EURid VZW in Amsterdam, Netherlands - us-abn-as51468, hosted by One.com in Ashburn, United States - kh-pnh-as7712, hosted by Sabay Digital Coperation (sponsored by APNIC) in Phnom Penh, Cambodia The map of all anchor locations is available at: https://atlas.ripe.net/anchors/map/ You can access the anchoring measurements for all anchors at: https://atlas.ripe.net/anchors/list/ And here are all of the anchor hosts: https://atlas.ripe.net/get-involved/community/#!tab-anchor-sponsors We are still accepting new applications from organisations interested in hosting a RIPE Atlas anchor, and are particularly interested in deploying anchors in the Middle East, Western Asia, Latin America and Africa in order to add more geographical diversity to the measurement data. To apply for your own RIPE Atlas anchor, please visit: https://atlas.ripe.net/get-involved/become-an-anchor-host/ It’s also possible to sponsor an anchor for organisations that want to host one but don’t have the necessary funding. To learn more about sponsoring an anchor, please contact us at atlas(a)ripe.net Regards, Michela Galante Measurements Community Building RIPE NCC

1 0

written off Probe #20578
by FREDDY BULOW 28 Jun '16

28 Jun '16

hello, is it gonna be my probe on, I just received the probe. because I have this message on the interface of the count : Note: this probe is Most Likely not operational, and hast Such it has-been written off as of 2015-05-27 1:02 UTC. The Most Likely reason for this is que le host couldn't be contacted. Thank you for your help. Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum

2 1

accounting glitch for probe 15105
by Kasper Pedersen 28 Jun '16

28 Jun '16

Tonight Freddy Bulow's post made me take a look at 15105. I was certain it would be up, but that was only halfway what I found. It was listed as being down since June 16th, and the uptime graph was showing an 8-day hole. It was, however, showing traffic on the graph, and locally I was also seeing normal probe traffic. Here's a pcap: https://highlyexperimental.kitsune.dk/201606242131.pcap At packet 765 I powercycled the probe, it came back up, and now showed 0 minutes up. That was expected, but what also happened was that the uptime graph filled in to no longer show downtime, the log entry showing the probe going down on the 16th disappeared (yes, really), and a new one showed it going down on the 24th with a few seconds downtime. The only thing left is the 8-day hole in the credit log, that did not change. /Kasper Pedersen Beware of corner cases. They tend to have sharp corners. Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum

2 1