- ripe-atlas - mailman.ripe.net

Question about rt definition of DNS measurements
by Klaus Darilion 06 Oct '13

06 Oct '13

Hi! When doing DNS measurements I see that the average "rt" time is considerable higher when setting the DO bit. When I check my name servers manually with dig (with and without DO) I do not see any considerable differences. Thus, I wonder how "rt" is measured in the Atlas probes and if the probe does some DNS/DNSSEC relevant processing during the "rt" interval, or is it really just the time between sending and receiving of the packets on IP layer? Thanks Klaus

2 1

Announcing RIPE Atlas Service Terms Documentation for Anchor Hosts
by Vesna Manojlovic 03 Oct '13

03 Oct '13

Dear colleagues, In the process of transitioning RIPE Atlas anchors towards being a production service, we have developed two documents that describe the service terms: - Draft RIPE Atlas Service Terms and Conditions - Memorandum of Understanding - Hosting a RIPE Atlas Anchor Probe Please see the details in this RIPE Labs article: https://labs.ripe.net/Members/becha/ripe-atlas-anchors-terms-and-conditions If you are currently hosting an anchor, or if you are interested in hosting a RIPE Atlas anchor in the future, we would like to hear any feedback you have on these draft documents. Our goal is to finalise the documents by 11 October so that we can announce the production service at the upcoming RIPE 67 Meeting in Athens. Regards, Vesna -- Vesna Manojlovic BECHA(a)ripe.net Senior Community Builder @Ms_Measurements for Measurements Tools RIPE NCC http://ripe.net

1 0

Measurement of impact of the Russian censorship
by Max Tulyev 03 Oct '13

03 Oct '13

Hello Atlas, recently I found some of Websites was blocked in Ukraine with PutinWall outside Russia. These resources was not hosted in Russia as well. Further investigation shows that the trace to these resources are either through Russia, or (which is more interesting) through Russian-based carriers which are do filtering on their networks boundary which are outside Russia as well, for example, in Frankfurt. This is some impaced nets in Ukraine, but probably countries whole connected through Russia, like Kazakhstan, are more suffering. Is it possible to use Atlas probes to figure out impact of PutinWall to countries should not be impacted by Russian censorship? And may be the efficient of filtering inside Russia? That's the sample of censored URL: http://stervozzinka.dreamwidth.org/15580.html The task is to probe it from Atlas probes and put on map the mark is it accessible or not for the first result. The second stage is to figure out carriers do the filtering of trans-Russia connectivity. I believe it will be interesting for a lot of people. I see this test is possible, but possible only manually by the RIPE NCC staff.

1 0

Problems deleting measurements
by Klaus Darilion 03 Oct '13

03 Oct '13

Hi! I have problems with lots of measurements, I can not delete them. e.g: A) https://atlas.ripe.net/api/v1/measurement/1027747/ The status is "Failed" and in the web I can not Archive or Stop it. Also deletion via REST fails: curl -H 'Accept: application/json' -X DELETE https://atlas.ripe.net/api/v1/measurement/1027747/?key=01....6d {"error": {"code": 200, "message": "That measurement cannot be stopped."}} btw: is above REST call correct? Same problem for measurment 1012558 which is in status Stopped. B) Is "archive" in the web interface identical to "DELETE" via REST? E.g. the web interface offers me "Archive" for measurement 1029338 (and I am quite sure it would work), but the REST call fails with same result: curl -H 'Accept: application/json' -X DELETE https://atlas.ripe.net/api/v1/measurement/1029338/?key=01....d {"error": {"code": 200, "message": "That measurement cannot be stopped."}} Further, the web interface offers "Stop" and "Archive", but the REST call only offers "DELETE". So, how do I "Stop" via REST? For me it is confusing to have different terms in the web interface and REST API. C) 1031725: The measurement is currently (UTC 18:30) in status Ongoing. Start Time is UTC 19:45, Stop Time is 19:55. When I stop the measurement, the measurements stop time changes to the current time, but status is still Ongoing, and I can not Archive (not offered), but it still offers always Stop. But when I delete via REST, the measurement gets stopped (status Stopped in web interface). So does REST-DELETE is identical to "Stop" in web interface? If yes, how do I archive via REST? Further, DELETE a stopped message should not produce error "That measurement cannot be stopped.", but rather "That measurement is already stopped." D) For the web interface it would be cool to stop/archive/delete measurements more comfortable. Eg. select multiple measurements and then choose "stop and archive". Thanks Klaus Thanks Klaus

2 2

Probe uptime reporting issues
by Robert Kisteleki 01 Oct '13

01 Oct '13

Dear All, On 21 September we deployed a new software version on our core infrastructure components. Unfortunately this contained a bug that we didn't catch in time, which caused "probe uptime reports" not to be propagated properly. This affected the "monthly probe uptime reports" as well as -- in some cases -- the amount of credits received for a probe. We've fixed the bug and re-sent the missing uptime entries. Please let us know (in an email to atlas(a)ripe.net, mentioning your email address and probe ID) if you received less credits than you should have, and would like to receive compensation. In order to improve our process, we're working on an internal test suite that will help us catching these kind of errors in time. We aplogise for the inconvenience this issue may have casued. Regards, Robert Kisteleki for the RIPE Atlas team

1 0

Credits transfer no longer working?
by Stephane Bortzmeyer 30 Sep '13

30 Sep '13

Did anyone notice problems with credit transfers? I run a RIPE Atlas workshop tomorrow abnd I tried to transfer credits to attendants, people with a RIPE account, both in the same LIR and outside. Nothing is credited on their side.

4 4

finding a probe
by Randy Bush 27 Sep '13

27 Sep '13

remote hands plugged an old style probe in. i see it on the ether port they claimed, its mac is 00:80:a3:91:4b:0d (my others are all 00:20, hmmm) i plug the dhcp-issued address 198.180.152.27 into the page at https://atlas.ripe.net/register/ it tells me there is no probe there how to debug? randy

1 0

REST API Problems for DNS measurements with DO and TCP
by Klaus Darilion 26 Sep '13

26 Sep '13

Hi! I managed to create DNS measurements via the REST API, but fail to set the DO and protocol:TCP option. According to the documentation (https://atlas.ripe.net/doc/measurement-creation-api/) the relevant properties are use_EDNS0 and use_tcp. So I tried it with { "definitions": [ { "is_public": true, "is_oneoff" : false, "target": "194.0.25.13", "description": "a.dns.nic.versicherung_IP4_TCP_noDO", "type": "dns", "af": 4, "interval": 300, "use_EDNS0": false, "use_TCP": true, "use_probe_resolver": false, "use_NSID": true, "query_class": "IN", "query_type": "SOA", "query_argument": "versicherung", "udp_payload_size": 1024, "protocol": "TCP", "do": true } ], } but that does not work - the generated measurements do not use TCP and DO. When I create the measurement via the web interface and review the measurement via the REST API, I see that other properties are set: "do" and "protocol". E.g: # curl https://atlas.ripe.net/api/v1/measurement/1027747/ {"all_scheduling_requests_fulfilled": true, "can_visualise": false, "creation_time": 1380018470, "description": "TEST via WEB", "do": true, "dst_addr": "194.0.25.13", "dst_asn": "1921", "dst_name": "194.0.25.13", "interval": 240, "is_oneoff": true, "is_public": true, "msm_id": 1027747, "nsid": true, "participant_count": 1, "protocol": "TCP", "query": {"class": "IN", "type": "SOA", "value": "versicherung."}, "resolve_on_probe": false, "resolved_ips": ["194.0.25.13"], "result": "/api/v1/measurement/1027747/result/", "start_time": 1380018470, "status": {"id": 7, "name": "Failed"}, "stop_time": 1380018904, "type": {"id": 6, "name": "dns"}, "udp_payload_size": 512} So I tried to create measurements with the "do" and "protocol" properties, but these properties are again ignored. If I am doing something wrong, so please give me some hints. Otherwise the API documentation is wrong and these properties can not be set via REST, only via the web interface - and should be fixed. Thanks Klaus

3 6

IPv6, RA and static IPv6 assignment
by Mike. 19 Sep '13

19 Sep '13

Are there any plans to allow the probe's listening for RA to be disabled so that I can configure a static IPv6 address, router and DNS server without RA overwriting my values?

4 4

Add E-Mail notification when a probe is back up (for more than 60 minutes)
by Roman Mamedov 19 Sep '13

19 Sep '13

Hello, Got one of these: > Your probe 73 has been disconnected since 2013-09-19 09:26:19 UTC. > > This is an automatically generated email from RIPE Atlas. It was sent to you because you asked to be notified if your probe becomes disconnected for more than 60 minutes. > > If you want to change this, or disable this notification altogether, please go to https://atlas.ripe.net/atlas/myprobes.html, click on "My Probes" and then on probe 73. In the opened tab, select "Probe's Settings" and then "Notifications" to change your settings. > > Kind regards, > > RIPE Atlas Team > What's unusual this time, is that I did not change anything in my network setup, and I can still ping the probe both on its local v4 and global v6 addresses. So one way of action would be to unplug and replug the probe in hope that it sorts out itself; 2nd course of action would be to simply wait and see if it reconnects on its own. If I choose this, I have to keep the Atlas website open in a browser tab, refreshing from time to time to see if the readings changed to "Connected". So what baffles me about this, why can't I get a simple E-Mail notification same way as "it went down", to tell me that "ok now it's back up"? -- With respect, Roman

1 0