- ripe-atlas - mailman.ripe.net

Maximum daily spending boundaries?
by Sebastian Castro 12 Jan '17

12 Jan '17

Hi: While scheduling a few one-off measurements, I'm constantly hitting the "Maximum daily spending" limit, however I don't have any ongoing measurements and just a handful of one-off measurements going at a expense of ~5000 credits each. When is the daily spending is reset? Midnight in some time zone? Something different? This case seems to be a race condition or something like that, as few measurements attempts actually go through, while the rest is rejected. A consistent behavior seems to be "from here no other measurement will succeed" Cheers! -- Sebastian Castro Technical Research Manager NZRS Ltd. desk: +64 4 495 2337 mobile: +64 21 400535

2 1

Maximum (unknown) spending limit?
by Sebastian Castro 11 Jan '17

11 Jan '17

Happy New Year RIPE Atlas Users: Executing some measurements today, it started rejecting them with the message: Executing this measurement request would violate your maximum daily spending limit of {max} credits. Please stop some of your currently running measurements and try again. It's startling the {max} credits, like a template that didn't get replaced when processing the message, not the message itself as it's documented. A little 2017 bug perhaps? Cheers! -- Sebastian Castro Technical Research Manager NZRS Ltd. desk: +64 4 495 2337 mobile: +64 21 400535

2 1

JE country code
by Marty Strong 11 Jan '17

11 Jan '17

Hi Atlas list, I sent a probe to Jersey (https://atlas.ripe.net/probes/28215/), but it shows up as GB instead of JE. Seems like perhaps a geodb is wrong :)

6 9

RIPE Atlas APIs
by Robert Kisteleki 03 Jan '17

03 Jan '17

Dear colleagues, We've just published a RIPE Labs article about a reminder for the RIPE Atlas API version changes. You can read it here: https://labs.ripe.net/Members/kistel/ripe-atlas-api-changes Regards, Robert Kisteleki RIPE NCC

2 3

status-checks very slow?
by Stephane Bortzmeyer 03 Jan '17

03 Jan '17

Since yesterday 2200 UTC, status-checks seem very slow (around 15 seconds, which make my monitoring software Icinga timeout). New Year party hangover?

1 1

RIPE Atlas Probes at Hackerspaces
by Vesna Manojlovic 28 Dec '16

28 Dec '16

Dear all, here is an example of the possible communities that are now easier to build around RIPE Atlas probes. With the tagging of similar probes, existing communities can use additional tools for creating and analysing RIPE Atlas measurements, such as "IXP Country Jedi", to create their own interpretation of the available data. The example we used is - hackerspaces: "community-operated physical places, where people share their interest in tinkering with technology, meet and work on their projects, and learn from each other." We are hoping this is going to be an inspiration to the reader, and an invitation to play with the results and improve on the code. Longer story, with pictures, is available on RIPE Labs: https://labs.ripe.net/Members/becha/the-next-42-ripe-atlas-probes-at-hacker… Regards, Vesna

1 0

Http
by mostafa shahdadi 22 Dec '16

22 Dec '16

Sent from my iPad

1 0

New on RIPE Labs: Four Years of RIPE Atlas Anchors
by Mirjam Kuehne 22 Dec '16

22 Dec '16

Dear colleagues, Four years have passed since the RIPE NCC announced its plans to put RIPE Atlas anchors into production. Since the first anchors went online in 2013, we’ve been working hard to both maintain and expand the network. As a result, we currently have 238 anchors deployed across 66 countries! Please find more on RIPE Labs: https://labs.ripe.net/Members/alun_davies/four-years-of-ripe-atlas-anchors Kind regards, Mirjam Kuehne RIPE NCC

1 0

Success Story: Zoom-in on Germany
by Vesna Manojlovic 09 Dec '16

09 Dec '16

Dear community, we wrote an article as an example of how cross-pollination between two or more communities can create success. An overlap between IETF participants, RIPE Atlas users and listeners of a popular German podcast has led to growth in the deployment of RIPE Atlas probes. We are still interested in expanding this platform in areas and networks that need more coverage. For pictures & links, go here: https://labs.ripe.net/Members/becha/ripe-atlas-success-story-zoom-in-on-ger… Text is bellow. Regards, Vesna In July 2016, during the IETF meeting in Berlin, the popular "rfc podcast" had a special episode aired an interview with Daniel Karrenberg talking about the RIPE NCC and RIPE Atlas. Thanks to the podcast listeners, and with the help of promotion on Twitter, the episode prompted many, many, MANY applications for new RIPE Atlas probe hosts. Because of both summer vacations and a temporary shortage of probes, there was a delay in shipping - but when the new batch of probes arrived at our office, we started shipping them to applicants, most of whom were from Germany. Currently, with regard to the number of active probes, Germany is leading with more than 1,000. This is more than the USA, which was in the lead for the previous few years. If you want to zoom in to this success-story, you can take a look at this RIPEstat widget. There you can see that, between 22 September and 7 October, the number of activated probes jumped from 999 to 1,157. Thank you to all the hosts, in Germany and elsewhere, who are helping to build RIPE Atlas - the largest active measurements platform! Actions Although we are happy that there is so much enthusiasm in Germany, we are still interested in increasing diversity of coverage. To this end, we're looking to reach out to: - Regions, countries and areas within countries with fewer probes - Networks (ASNs) with fewer probes - Deploying RIPE Atlas anchors instead If you would like to apply for your own RIPE Atlas probe, there is a special link just for the readers of this RIPE Labs article :) If you already have a probe, and want to get in touch: - Check out the Community pages - Follow us on Twitter - Be active on the mailing list

1 0

Probe 16917 started over
by Jacques Lav!gnotte. 08 Dec '16

08 Dec '16

after changing the usb memory stick. https://atlas.ripe.net/probes/16917/#!tab-general Regards, Jacques -- GnuPg : C8F5B1E3 WeUsePGP Because privacy matters http://weusepgp.info/

1 0

ipad air 2
by mostafa shahdadi 07 Dec '16

07 Dec '16

Sent from my iPad

1 0

ipad air 2
by mostafa shahdadi 07 Dec '16

07 Dec '16

Sent from my iPad

1 0

RIPE Atlas and nagios status-checks
by Robert Kisteleki 07 Dec '16

07 Dec '16

Dear All, The following message may be of interest to you if you're using Nagios (or variations like icinga) to query RIPE Atlas for status-checks. Yesterday morning our operations team made a change to the service configuration such that atlas.ripe.net only answers queries if they have proper Host: headers set. This is arguably a good operational practice, so we'd like to enforce it. However, one of the users running said nagios checks noticed that this causes 403 answers instead of the expected behaviour. We concluded that this is because the check_http plugin doesn't always set the Host: header. According to our statistics in total 12 users are affected, and since we could not foresee this problem, we temporarily reverted our configuration to the old settings. The fix on the client side is easy: one needs to add "-H atlas.ripe.net" parameter (or a similar change depending on forks and versions) to the checks. We'd like to ask our user to apply this change in the next two weeks in order to send well-formatted requests to our service. Thank you, Robert Kisteleki RIPE NCC

1 1

New on RIPE Labs: Countering RIPE Atlas Hardware Issues with Better Firmware
by Mirjam Kuehne 06 Dec '16

06 Dec '16

Dear colleagues, We're working on installing better firmware in order to counter hardware issues with RIPE Atlas. Please find more information on RIPE Labs: https://labs.ripe.net/Members/kistel/ripe-atlas-countering-hardware-issues-… Kind regards, Mirjam Kuehne RIPE NCC

1 0

tp-link probev3 tl-mr3020
by folkert 25 Nov '16

25 Nov '16

Hi, I have one of those tp-link probes, a v3 it looks like. Now when I got it, I was warned to put it on a 1A powersource. Now that is a bit of a problem so I started to measure its power usage to verify if I could maybe run it on a smaller power supply. What I measure is 0.14A upto 0.23A - that should easily be powered by a 0.5A power supply I think. As I'm not an electronics expert I'm now writing this message for confirmation: am I right about the power usage? Or ar there situations where it would be using a lot more power? Thank you, Folkert van Heusden -- ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com

3 2

Fifteen new RIPE Atlas anchors have joined the community
by Michela Galante 24 Nov '16

24 Nov '16

Dear colleagues, Fifteen new RIPE Atlas anchors have been activated since our last announcement in September, bringing the total number to 231: - us-bos-as26167, hosted by Markley Group in Boston, United States (IPv4-only anchor) - us-pct-as88, hosted by Princeton University in Princeton, United States (IPv4-only anchor) - tz-dar-as327844, hosted by Tanzania ISP Association in Dar es Salaam, Tanzania and ke-nbo-as37578, hosted by TESPOK in Nairobi, Kenya. These are the first two of five anchors that ISOC will sponsor. - dk-aal-as9158 and dk-cph-as9158, hosted by Telenor Denmark A/S in Aalborg and Copenhagen, Denmark - au-syd-as135150, hosted by bet365 in Sydney, Australia - ca-wnp-as16395, hosted by asn16395 in Winnipeg, Canada - us-ljl-as195, hosted by Center for Applied Internet Data Analysis (CAIDA) at the University of California, San Diego in La Jolla, United States - nz-akl-as38064, hosted by NZ Registry Services in Auckland, New Zealand - us-bos-as111, hosted by the Boston University in Boston, United States - kw-kwi-as42961, hosted by Zain Kuwait in Kuwait City, Kuwait - nl-ede-as12859-client, hosted by HCC in Ede, Netherlands - it-rom-as24796, hosted by NaMeX Consortium in Rome, Italy - us-fcn-as32934, hosted by Facebook in Forest City, United States. You can find the full list of anchors, a map of their locations, a list of the hosting organisations and more information about RIPE Atlas anchors online: https://atlas.ripe.net/anchors/list/ Interested in hosting a RIPE Atlas anchor? Learn more: https://atlas.ripe.net/get-involved/become-an-anchor-host/ We are particularly interested in deploying anchors in the Middle East, Western Asia, Latin America and Africa in order to add more geographical diversity to the measurement data. There are several organisations that want to host a RIPE Atlas anchor but don’t have the necessary funding. To learn more about sponsoring an anchor, or for any other questions, please contact us at atlas(a)ripe.net And don’t forget to let us know if you’re doing something interesting with RIPE Atlas data - we always want to hear about your use cases, research and experiences! Regards, Michela Galante RIPE NCC

1 0

Emails Regarding Probe Connection Issues
by Alun Davies 17 Nov '16

17 Nov '16

Dear members of the RIPE Atlas community, It was recently called to our attention that certain emails we send out to RIPE Atlas probe hosts, concerning probe connection issues, have been somewhat abrupt in their tone. We are working to address the issue. While we devote a great deal of effort to ensuring that any correspondence we send out is both informative in content and appropriate in tone, we greatly appreciate feedback whenever it is felt that such goals have not been met. We would like to take this opportunity to once again thank all RIPE Atlas probe hosts for their ongoing participation. Best regards, Alun Davies (RIPE NCC)

7 7

New on RIPE Labs: Changes to RIPE Atlas API Keys
by Mirjam Kuehne 11 Nov '16

11 Nov '16

Dear colleagues, We’ve made some changes to RIPE Atlas API Keys with the aim of improving the experience of RIPE Atlas users. The changes are designed to boost transparency and efficiency in the way users are able to manage their API Keys. Please find more details on RIPE Labs: https://labs.ripe.net/Members/alun_davies/changes-to-ripe-atlas-api-keys Kind regards, Mirjam Kuehne RIPE NCC

1 0

Probe marked as offline, but it's online...
by Christian Schrötter 10 Nov '16

10 Nov '16

Hello Atlas users! I've connected my probe to a new network environment, to test everything before the big migration starts. It came up again immediately and displayed it's new network details at the WebUI. For the first time there was an IPv6-ULA prefix visible. The router (OpenWrt 15.05) supports full IPv6 via tunnel, but it's not advertised to the probe's VLAN and blocked by firewall rules. Everything seems to work, good! I've switched it off/on for several times, went back to the old router/modem and powered it on again. After some hours I've checked the WebUI again: My probe is offline! :-( I've tested it again on the new router: Offline! Once again on the old setup: Offline! Untouched default router/modem from my ISP: Offline! Current LED status: (from 1-5; power to button) > on > off > slow blink > on > on SOS-DNS-history from Wireshark: (switch port mirrored to my analysis interface) > Standard query 0x0002 AAAA U.*************.sos.atlas.ripe.net > Standard query response 0x0002 AAAA 2001:67c:2e8:11::c100:1337 > Standard query 0x0003 A U.*************.sos.atlas.ripe.net > Standard query response 0x0003 A 193.0.19.55 The probe is online and communicates with many servers. Looks like the built-in tests are running fine. There is NTP, DNS, ICMP, UDP and HTTP traffic. But it's still offline at the WebUI. I've double and triple checked everything on my side. Any ideas what's going wrong? -- With kind regards, Christian Schrötter

2 4

Latencymon widget: It is not possible to retrieve measurement information for this ID
by Marat Khalili 10 Nov '16

10 Nov '16

Latenchmon widget stopped working for me this morning with the message "It is not possible to retrieve measurement information for this ID". Same error displays for sample widget code from documentation <https://atlas.ripe.net/docs/tools-latencymon/#embed>: > |<script > src="https://atlas.ripe.net/resource/latencymon/latencymon-widget-main.js"></script> > <div id="place-here"></div> <script> initLatencymon( '#place-here', > {}, // Tool options, see table below for more info { > measurements:[1791207, 2083078] } // Query options, see table below > for more info ); </script>| Has something changed in API, or are these just temporary problems server-side? -- With Best Regards, Marat Khalili

3 3

Ethical considerations
by Robert Kisteleki 07 Nov '16

07 Nov '16

Dear All, As mentioned in my RIPE Atlas update during the RIPE 73 MAT working group, we'd like to draw RIPE Atlas users’ attention to relevant ethical considerations. We've just published a RIPE Labs article about this: https://labs.ripe.net/Members/kistel/ethics-of-ripe-atlas-measurements/ Regards, Robert Kisteleki RIPE NCC

1 0

Probe not taking UDMs for months but no issue reported
by gboonie 06 Nov '16

06 Nov '16

Hi, My probe 24434 had an issue without me being aware because there was no notification. But even if there was, it was hard to detect. The only reason I found out was because I looked at a long running measurement that did not return data. On the other side, the built in measurements seemed fine. So first though was that something prevented the probe to perform DNS tests to the network's resolvers. I've attached a laptop to the connection but all worked fine. So rebooted the probe and found that the USB storage went to read-only. But why does it only detect this after a reboot? This probably means that the probe probably only checks at startup what the status is of the USB key. The other thing that is odd is that the probe kept earning credits. Here is a graph with the proof that it did stop taking UDMs early august. *My request: Please improve the probe's detection of issues. I do not mind replacing a USB dongle at all but I do find it annoying that the probes can be in this state where it is not down but also not taking any UDMs.* Thanks, Dave Proud owner of 3 probes.

1 0

Atlas Anchor contact role accidentally cleaned (Was: Clean-up of unreferenced objects in the RIPE Database)
by Ondřej Caletka 03 Nov '16

03 Nov '16

Dne 6.9.2016 v 15:32 Tim Bruijnzeels napsal(a): > Dear colleagues, > > In compliance with data protection rules and the desire to maintain a “clean” database, we plan to remove unreferenced objects from the RIPE Database. We have recently been working on an improved implementation, and we are now ready to re-start the process. > > In order to be eligible for deletion, objects must have no incoming references (or be a person-maintainer or role-maintainer pair) and must have had no incoming references from any aut-num, domain, inet(6)num, route(6), as-set, filter-set, inet-rtr, peering-set, route-set, rtr-set, as-block, key-cert or irt object during the last 90 days. Hello Tim, hello RIPE Atlas team, I just found out that my RIPE Atlas Anchor contact role object CAAO-RIPE has been cleaned from the RIPE database. This object is registered as a RIPE Atlas Anchor contact in the RIPE Atlas systems. Could you perhaps somehow undelete such role object? Would it be possible to prevent such clean up in the future? Best regards, Ondřej Caletka CESNET

3 6

Probe reconnecting problem
by Nils Ohlmeier 03 Nov '16

03 Nov '16

Hello, is there any known problem around probes reconnecting after the uplink connectivity got lost? My probe was offline for several days even though my local network worked fine. I'm assuming that the uplink was dead for some time. And I waited a few days to see if the probe would recover by itself, but eventually gave up and power cycled it. Is there anything I could do to debug such a problem in case it should happen again? Cheers Nils

2 1

Do you have any Probe version 2 [Lantronix XPort] available for distribution?
by ripe＠brite.cz 03 Nov '16

03 Nov '16

Hi team, I will have the opportunity to install a probe on very remote place. Due to limited space in the place of installation, and also very limited reachability in case of USB failure, I would like to install only the previous version of probe, without USB flash drive. Do you have one or two Probes [not based on TP Link router] available? Thank you Jiri

2 1

Fwd: Your RIPE Atlas Probe (ID: 24870) is not connected to our network
by Jonathan Brewer 02 Nov '16

02 Nov '16

Hi Team, It'd be great if you could change the tone of the alert messages below. Admit some fault. Ask for help. The majority of disconnects I've seen have been due to device failure, nothing to do with " everything is set up correctly on your side" and messages like this do nothing to encourage me or the networks I've convinced to host probes to help fix the problems. It really hurts that I've lost so many probes that took so much effort to get installed - and these messages don't help. Thanks, Jon ---------- Forwarded message ---------- From: RIPE Atlas <atlas(a)ripe.net> Date: 30 October 2016 at 20:41 Subject: Your RIPE Atlas Probe (ID: 24870) is not connected to our network To: jon.brewer(a)gmail.com Dear RIPE Atlas probe host, Thank you for participating in RIPE Atlas! This is the second reminder that your probe () is not connected to our infrastructure and has been disconnected since 2016-10-09 05:44 UTC. Could you please check whether everything is set up correctly on your side? You may be able to find more information about the possible cause of the problem here: https://atlas.ripe.net/probes//#!tab-status <https://atlas.ripe.net/probes/24870/#!tab-status> If you believe everything is correctly set up and your probe is still reported as disconnected after 24 hours when you log in at https://atlas.ripe.net, please contact us at atlas(a)ripe.net Best regards, RIPE Atlas Team ********** You are receiving this message because you applied for or were given a RIPE Atlas probe. We will only send messages when your probe becomes disconnected for an extended period of time.

1 0

Probe pickup at meeting?
by Joe Provo 27 Oct '16

27 Oct '16

Hey, Are any $SMALLNUM probes available for pickup tonight/tomorrow? I found I only have one "to be distributed" probe left, and in a couple weeks will be taking holiday in Columbia (in current coverage voids :-). Cheers! Joe -- RSUC / GweepNet / Spunk / FnB / CotSG / Usenix / NANOG

2 1

Actual measurement interval much larger than planned
by Wenqin SHAO 20 Oct '16

20 Oct '16

Dear list, I encountered some cases where the actual time interval between two neighbouring measurements being much larger than the scheduled value. Have you witnessed similar cases? I appreciate explanations on underlying reasons. Here goes an example: from ripe.atlas.cousteau import AtlasResultsRequest filters = dict(msm_id=1010, probe_ids=[16981], start=1470055258, stop=1470056217) is_success, results = AtlasResultsRequest(**filters).create() if is_success: for mes in results: print mes.get('timestamp', -1) The above code requests some built-in ping measurements (240s interval) made by probe 16981 and prints their timestamps. See below for the execution result: 1470055259 1470055499 1470055978 1470056216 Four measurements are retrieved within the given time range. I noticed that time interval between the 2nd and the 3rd measurement is 479s much larger than the planned value 240s. How come? Many thanks for your attention. Best regards, wenqin

4 9

Re: [atlas] ripe-atlas Digest, Vol 62, Issue 14
by Andre Heinrichs 19 Oct '16

19 Oct '16

On Wed, Oct 19, 2016 at 12:00 PM, <ripe-atlas-request(a)ripe.net> wrote: > Date: Tue, 18 Oct 2016 12:24:25 +0200 > From: Philip Homburg <philip.homburg(a)ripe.net> > To: ripe-atlas(a)ripe.net > Subject: Re: [atlas] probe offline - troubleshooting requested > Message-ID: <3af3a709-9198-06d7-19a1-ae367d03a58e(a)ripe.net> > Content-Type: text/plain; charset=utf-8 > > On 2016/10/18 7:46 , Andre Heinrichs wrote: >> Any ideas what I could try to get the probe reconnected? >> >> Just to be complete: Here are the last lines of the SOS history: >> 62.109.121.35 2016-10-18 05:43:27 A 3h 59m >> 62.109.121.35 2016-10-18 05:43:27 AAAA 3h 59m > > The best thing to try is to reflash the USB stick (i.e. connect the > probe without USB stick, wait for a out 10 minutes and insert the USB > stick). > > Unfortunately, corruption of the filesystem on the USB stick can result > in weird behavior, like your probe is showing. SOS works fine but it > doesn't connect. Just for the record: the probe works again after I did the USB fix Philip described. I'm guessing the status tab only showed the hint about Firewall trouble because that would have been another possible cause for the symptoms. Thanks, Andre

2 1

New on RIPE Labs: Orange Blacklisting: A Case for Measuring Censorship
by Mirjam Kuehne 19 Oct '16

19 Oct '16

Dear colleagues, Please find a short a article on measuring censorship on RIPE Labs: https://labs.ripe.net/Members/stephane_bortzmeyer/orange-blacklisting-a-cas… Kind regards, Mirjam Kuehne RIPE NCC

1 0

probe offline - troubleshooting requested
by Andre Heinrichs 18 Oct '16

18 Oct '16

Last night my probe (#29384) was declared offline after the daily Internet disconnection my FritzBox executes to keep the provider from disconnecting me after 24 hours online. According to the SOS history the probe gets DNS requests out but somehow fails to connect completely. I tried rebooting every network component i could locally get my hands on but that didn't seem to help much. The LEDs on the probe don't actually fit any of the descriptions from the FAQ: They are On, Off, fast(er) blink (at least if compared to shortly after booting (Network Test?), On, On. I'm guessing it means the network somehow managed to fail. Although I don't notice anything missing from what I did on the network this morning. Any ideas what I could try to get the probe reconnected? Just to be complete: Here are the last lines of the SOS history: 62.109.121.35 2016-10-18 05:43:27 A 3h 59m 62.109.121.35 2016-10-18 05:43:27 AAAA 3h 59m TIA, Andre, currently not in reach of the probe

2 1

Shall we continue non-public measurements in RIPE Atlas?
by Mirjam Kuehne 18 Oct '16

18 Oct '16

Dear colleagues, "Non-public measurements" is a feature of RIPE Atlas that allows users to use the infrastructure to measure things while not sharing those results with the public. Is that still a useful feature? Should it exist in the future? For more details, see this new post on RIPE Labs: https://labs.ripe.net/Members/kistel/non-public-measurements-in-ripe-atlas Please also take the polls at the end of the article. Kind regards, Mirjam Kuehne RIPE NCC

1 0

Temporary Reduction of Available History on RIPE Atlas and RIPEstat
by Romeo Zwart 18 Oct '16

18 Oct '16

Dear colleagues, Today, Tuesday, 18 October 2016, between 09:00 and 10:00 UTC, the back-end storage cluster for RIPE Atlas and RIPEstat will be switched to a backup environment. This is part of planned maintenance work. The backup facility has a more limited amount of storage space, which means that RIPEstat and RIPE Atlas, including specific applications like DNSMON and DomainMon, will not serve data older than one year. We expect this to have no impact on ongoing RIPE Atlas measurements, scheduling new measurements, or the retrieval of more recent data from RIPE Atlas, RIPEstat or DNSMON. We apologise for any inconvenience. Kind regards, Romeo Zwart

1 0

Problems with f.root-servers.net in Russia?
by Marat Khalili 18 Oct '16

18 Oct '16

Sorry for slight offtopic, but does anybody know what is up with Russian instance of F root server? I observe periods of very high packet loss since 11th of October. I used to measure my own internet connectivity pinging it, but seems like by internet works better than that of the root server. Here's a measurement with 50 Russian probes, 34 of them show "Unreachable" right now: https://atlas.ripe.net/measurements/6886549/#!probes -- -- With Best Regards, Marat Khalili

2 1

Out of date system probe tags
by Chris Amin 17 Oct '16

17 Oct '16

Dear all, Some of you have noticed that certain system tags (see below) remained applied to probes when they should have been removed. This is because the process that adds and removes these tags was temporarily disabled following the service issues that we experienced earlier in the month. This process has now been re-enabled after verifying that it was not a cause of the service downtime, and these tags have been applied correctly. The affected tags were: * Flaky connection * Firewall problem suspected * DNS problem suspected * No flash drive * Readonly flash drive * Hardware problem suspected Kind regards, Chris Amin RIPE NCC

1 0

Connect/disconnect timestamps on probe page disappeared
by Marat Khalili 13 Oct '16

13 Oct '16

Connect/disconnect timestamps on a probe page like https://atlas.ripe.net/probes/26656/#!tab-network disappeared this morning; durations still shown. Probably some problem with server side scripts? -- -- With Best Regards, Marat Khalili

2 1

firmware download test?
by Yang Yu 12 Oct '16

12 Oct '16

Hi, I have 2 probes that are connected but shown as offline even after several power cycles. I performed USB stick troubleshooting procedures by removing the USB stick and saw NO-USB SOS message. But after inserting the USB stick there wasn't any new SOS messages. Plugged the USB stick to computer and saw corrupted file system. Formatted the stick and inserted it back, still no SOS messages. What kind of filesystem layout is expected on the stick? From what I read the probe should automatically partition/format the stick. Maybe the stick is bad. I do see a good amount of packet loss between the probe's network and the registration server. How robust is the firmware download process (e.g does it abort on TCP RST)? Is there any way to manually load the firmware? Thanks. Yang

3 4

New on RIPE Labs: What Can You Do with One Million RIPE Atlas Credits?
by Mirjam Kuehne 12 Oct '16

12 Oct '16

Dear colleagues, Ever wondered what to do with all those RIPE Atlas credits you earned? Find out on RIPE Labs how you can best spend your credits to check your services' connectivity and troubleshoot potential issues. https://labs.ripe.net/Members/becha/what-can-you-do-with-one-million-ripe-a… Kind regards, Mirjam Kuehne RIPE NCC

1 0

Re: [atlas] ripe atlas probe v1 cat sylvester (Colin BT)
by Colin Johnston 10 Oct '16

10 Oct '16

smaller pic now to so hopefully auto approved :) Managed to raise over 2500 pounds for Byte Night NW (Action for Children) https://www.facebook.com/ByteNight <https://www.facebook.com/ByteNight> contact myself if want to donate Here is Sylvester on Bus to event, sleeping out and on Bus back home. yours Colin Johnston

1 0

Service downtime
by Robert Kisteleki 06 Oct '16

06 Oct '16

Hello, We seem to experience a database backend problem, rendering the whole service unavailable. We're busy fixing it and investigating the cause. Ill report on progress as soon as I have more information. Regards, Robert

1 1

ripe.atlas.net issues
by Max Mühlbronner 06 Oct '16

06 Oct '16

"Oops - this page experienced an error while loading." My atlas / My probe does not work, the checks are failing. (Since ~12 minutes) Please don't tell me that it's maintenance work again, without any announcement? ;) Max M.

5 7

SSL error on OpenIPMap
by Anurag Bhatia 04 Oct '16

04 Oct '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello everyone. Is it just me or anyone else getting SSL error on OpenIPMap? I can see that SSL cert of atlas.ripe.net is valid but when we open OpenIP Map, it calls one specific map image from fastly on HTTP resulting in "mixed content" making Chrome to throw SSL error. This is the URL of that image:http://stamen-tiles-c.a.ssl.fastly.net/toner-lite/3/5/5.png It does seems to be available on https already and so probably someone at RIPE need to update URL to call https in URL and avoid the false positive it's giving. Thanks. - -- Anurag Bhatiaanuragbhatia.com -----BEGIN PGP SIGNATURE----- Version: Mailvelope v1.5.2 Comment: https://www.mailvelope.com wsFcBAEBCAAQBQJX7qbdCRDAbdUkJF5Y4gAAP7oP/R+c7QMQEIt7c0/fLnKx IrvoSxS0RlivGHQBcQY4DcQvXNU0SsBdjUTG3hOJP/OyCERG9Uar8xRFXKAB LHrUGPa9rGdxHtJFJYL0fgKc0o0aELBkaot3unJPBRwGtp5Acyfx3Yv9CUF+ fqxq27tRnRtXklqVfYw5aWC20CC4EHEme3vv0+QsdasJ0s1mi1zehI1c60yI RQqZ35MaB9flyMyxU1L2CaKHh0BnZs0ssSxGsr/s2cfqhfu5KPzagi/obsEs 6mhwtkTPD1Y/649QAzs2E3vpZ83tn8fkExU54hHznpBy4QmNIAx7pnlwtOrX 8ou7Rn1Yt7V5NiSHGkr31sPJfMfHXErZ6NAl/Z7uPcs9+ofAkAEBh5H7pINr BFwZzX6DsqNiq1Q+F9sU385D5144Y4YE/vDIDXYXhSgbHv9NeqIph7Ceitt9 Ap4wx7eOh/8ONLddUdqf4/M0m9ORsFc4fRAhFkLCzLdUlXpDqAGGgxSFIcg4 NiInbdyZCO1Ula7TQCPR0qtTDJQ75w93wj5STM2uZjlVd5K6QUB4bmz8S/QX oEMLOSmjcWybQH+dBSJ25VVynCu7sRkSUyhyE2wwrb2adDw8pS0QMG5cyjhZ DX+XP9KGoFi6xYFCQypXO+bkSsh84OBKrxo+fFfznFTYFkDZ6yae/ZKSfC/o urP4 =coGp -----END PGP SIGNATURE-----

2 2

Inconsistent system tags
by Johannes Matheis 30 Sep '16

30 Sep '16

Hello, I got IPv6 connectivity for my probe 4365 a few days ago (2016-09-26) when I first noticed the system tag "IPv6 Doesn't Work". As the system tags aren't updated more often than every four hours I started some successful IPv6 measurements on that probe and settled back for four days. Now the probe is still flagged as IPv6 not working. In the meantime I noticed the tag "v2" but the general information tab tells me the system architecture is probev1… Actually I don't know if it's a v1 or v2, but it's still an old Lantronix one, so it's not completely wrong :-) Is there a possibility to re-trigger the assignment of the system tags for this probe or some other solution? Thanks! jomat

2 1

Initiating a TCP, UDP, and ICMP traceroutes from the same probe at the same time
by Zakaria Al-Qudah 30 Sep '16

30 Sep '16

Hi Folks, I am planning an experiment where I need each probe to perform TCP, UDP, and ICMP traceroutes at the same time. I could not see how I can do it using the Ripe Atlas website. Is there any way to do it? Best regards, Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum

3 2

Making public probes’ IP addresses public in web interface
by Andreas Strikos 30 Sep '16

30 Sep '16

Hello, We made a change a few weeks ago to the RIPE Atlas web interface to align it more closely with the API. As a result, you can now see the IP addresses for public probes, regardless of whether you are a logged in user or not. This information is displayed on the public probes’ detailed information pages, under the “Network” tab. Previously, public probes' IP addresses were not shown, even for logged in users. Nothing has changed in the API or the web interface for probes that are not shared publicly. We understand that some of you were surprised by this change and we apologise for not communicating it earlier. However, I want to make it clear that the IP addresses of public probes have always been available via the API, whether you are a logged in user or not. We decided to include it via the web interface so that our users could access the same information regardless of which interface they decide to use. RIPE Atlas is meant to be a public platform that openly provides data to everyone interested. In this spirit, we encourage everyone to make their probes public. However, if you decide that you *don’t* want to share your probe publicly, you can change this setting by going to your probe’s detailed information page (go to "My Atlas" and click on your probe’s ID), clicking on the “Edit” button under the “General Information” tab, and deselecting the “Shared Publicly” box. Please note that personal information such as MAC addresses and email addresses will never be shown, regardless of whether you decide to share your probe publicly or not. You can learn more about what information is made public in RIPE Atlas in this RIPE Labs article: https://labs.ripe.net/Members/becha/proposing-making-ripe-atlas-data-more-p… Please let us know if you have any questions or concerns. Regards, Andreas Strikos RIPE NCC

1 0

Fifteen new RIPE Atlas anchors - including the first IPv4-only anchor
by Michela Galante 19 Sep '16

19 Sep '16

Dear colleagues, Fifteen new RIPE Atlas anchors have been activated since our last announcement in June, bringing the total number to 216: - us-abn-as54054, hosted by Deteque LLC in Ashburn, United States - us-sgu-as46309, hosted by Gartner Inc in Saint George, United States - lu-kay-as35733, hosted by EURid VZW in Kayl, Luxembourg - de-ham-as35258, hosted by akquinet Outsourcing in Hamburg, Germany - ua-iev-as24725, hosted by Hostmaster LLC in Kiev, Ukraine - ca-wnp-as18451, hosted by les.net in Winnipeg, Canada - de-dus-as12676, hosted by HKN GmbH in Düsseldorf, Germany - uk-lon-as34587, hosted by bet365 in London, United Kingdom - us-lax-as15133, hosted by Verizon Digital Media in Los Angeles, United States - us-lwc-as2495, hosted by KanREN Inc in Lawrence, United States - lb-bey-as12812, hosted by the American University of Beirut in Beirut, Lebanon (IPv4-only anchor) - pg-pom-as17828, hosted by Telikom PNG (sponsored by APNIC) in Port Moresby, Papua New Guinea - ch-zrh-as9092, hosted by Open Systems in Zurich, Switzerland - nl-ams-as34106, hosted by TMG/Telegraaf in Amsterdam, Netherlands - dk-hje-as39642, hosted by WNB ApS in Højer, Denmark You can find the full list of anchors, a map of their locations, a list of the hosting organisations and more information about RIPE Atlas anchors online: https://atlas.ripe.net/anchors/list/ As a follow-up to some discussion on this list, we wanted to reiterate that we made the decision to support IPv4-only anchors because the goal of RIPE Atlas is to measure as much of the Internet as possible, and right now, that includes IPv4-only networks. We also believe that measuring networks before and after they enable IPv6 provides useful data. IPv4-only anchors are clearly marked as such, and we will implement checks to ensure these anchors become IPv6-capable as soon as their ASNs begin announcing IPv6. In the meantime, the RIPE NCC will continue to actively promote IPv6 deployment through our training courses, IPv6 Act Now website, IPv6 Roadshows and other programs, and our IPv6 Program Manager will follow up with any hosts requesting an IPv4-only anchor to help them in any way possible. We believe that supporting IPv4-only anchors will provide a more comprehensive understanding of the Internet and that the entire Internet community will benefit from more measurement data. You can learn more in this RIPE Labs article: https://labs.ripe.net/Members/suzanne_taylor_muzzin/ipv4-only-ripe-atlas-an… Interested in hosting a RIPE Atlas anchor? Learn more: https://atlas.ripe.net/get-involved/become-an-anchor-host/ We are particularly interested in deploying anchors in the Middle East, Western Asia, Latin America and Africa in order to add more geographical diversity to the measurement data. There are several organisations that want to host a RIPE Atlas anchor but don’t have the necessary funding. To learn more about sponsoring an anchor, or for any other questions, please contact us at atlas(a)ripe.net And don’t forget to let us know if you’re doing something interesting with RIPE Atlas data - we always want to hear about your use cases, research and experiences! Regards, Michela Galante RIPE NCC

1 0

"Invalid target" error for RFC 1918 space
by Yang Yu 18 Sep '16

18 Sep '16

Hi, I got "Invalid target" error when I tried to create a measurement to see how far some RFC 1918 prefixes got propagated (carrier not properly filtering customer announcement). What is considered invalid for each measurement type? Thanks. Yang

4 4

New on RIPE Labs: Using RIPE Atlas to Monitor Game Service Connectivity
by Mirjam Kuehne 14 Sep '16

14 Sep '16

Dear colleagues, Annika Wickert, a network engineer at a gaming company, describes how she used RIPE Atlas to monitor her company's services and improve their customers' experience - and even decided to become a RIPE Atlas sponsor! https://labs.ripe.net/Members/annika_wickert/using-ripe-atlas-to-monitor-ga… Kind regards, Mirjam Kuehne RIPE NCC

1 0

meaning of error message in Ping measurements
by Wenqin SHAO 13 Sep '16

13 Sep '16

Dear list, Could someone please help me figure out what these error messages in result field of ping measurement mean? - error: sendto failed: Invalid argument (related to name resolve?) - error: sendto failed: Bad file descriptor Many thanks. Best regards, wenqin

2 2

Re: [atlas] Rate limits on Atlas
by Emile Aben 09 Sep '16

09 Sep '16

On 08/09/16 14:01, Anant Shah wrote: > Hi Emile, > > Roya and I are working on a geolocation paper and want to use the atlas > probes to ping target IPs. > > I think I am hitting the rate limit on atlas even with 99 concurrent > measurements. All my measurements now show Forbidden status. Is there a > way to increase the limit? yes, ask the team at atlas(a)ripe.net (cc-ed). the folks there can extend limits (not unlimited of course, these limits are there for a reason :) ), but would need some info from you: - what is the experiment you'd like to perform - what would you want the new limit to be (and why what you want to do can't be done with the current limits and/or existing measurements) - when does your experiment end (ie. when can we put the limits back to the default) - promise us that you'll acknowledge RIPE Atlas in a paper - send us a link/copy of the paper once it's published (i hope i'm not forgetting things :) ) cheers, emile

1 0