- ripe-atlas - mailman.ripe.net

Data visualization not working?
by Max Grobecker 29 Aug '13

29 Aug '13

Hi, is there any known reason/issue why new created measurements don't visualize the data? I'm pretty sure I ticked the "Visualize Data" box when creating a new measurement, but when I open my new measurement, the "RRD" tab is missing and in the settings the "Visualize" box is unchecked :-( Is it just me or do other people have the same issue? Greetings, Max

2 2

Reddit?
by Daniel Quinn 29 Aug '13

29 Aug '13

Hello everyone, I'm one of the developers on the RIPE Atlas project and I'm hoping some of you can help me figure out if we should have a presence on [Reddit](http://www.reddit.com/) and if so, where. I'm a pretty active member of that community, so I was appointed to ask the lot of you if we should bother setting up a subreddit, or if we should just frequent any particular subreddit to answer questions and/or promote RIPE Atlas. So, does anyone reading this fancy the idea of better outreach on Reddit? And if so, in what way would you recommend? Feel free to post your responses to the list, or just respond to me directly. We'll let you know if we decide to branch out in this way.

3 4

Success stories to share at RIPE67?
by Vesna Manojlovic 27 Aug '13

27 Aug '13

Hi RIPE Atlas active hosts & users, I know of two RIPE Atlas related talks that are still being considered for RIPE67 -- and there might be more! Do you have a success story to share? Plenary-talks CallForPapers is extended, and then there are working-group sessions too, MAT-wg being the most typical, but in the past there were presentations on using RIPE Atlas in IPv6-WG and DNS, and Routing-WG... If you need help with preparing slides, or doing extra measurements to prove your tests - do let us know! Good luck if you decide to present, and see you at RIPE67! Regards, Vesna -------- Original Message -------- Dear Colleagues, A list of currently accepted RIPE 67 Plenary talks, BoFs, Tutorials and Workshops is now published at: https://ripe67.ripe.net/programme/meeting-plan/draft-programme/ There are still few slots remaining for a final RIPE 67 programme and RIPE Programme Committee will accept new proposals until *9 September 2013*. This is our last call for you to submit your proposals. See https://ripe67.ripe.net/programme/cfp/ or find the original CFP below. Kind regards Filiz Yilmaz for RIPE Programme Committee ------------------ Call for Presentations A RIPE Meeting is an open event where Internet Service Providers, network operators and other interested parties get together. Although the meeting is mostly technical, it is also a chance for people to meet and network with others in their field. RIPE 67 will take place from 14-18 October 2013 in Athens, Greece. The RIPE Programme Committee (PC) is now seeking content proposals from the RIPE community for the plenary session presentations, BoFs (Birds of a Feather sessions), panels, workshops, tutorials and lightning talks at RIPE 67. The PC is looking for presentations covering topics of network engineering and operations, including but not limited to: * IPv6 deployment * Managing IPv4 scarcity in operations * Commercial transactions of IPv4 addresses * Data centre technologies * Network and DNS operations * Internet governance and regulatory practices * Network and routing security * Content delivery * Internet peering and mobile data exchange Submissions RIPE Meeting attendees are quite sensitive to keeping presentations non-commercial, and product marketing talks are strongly discouraged. Repeated audience feedback shows that the most successful talks focus on operational experience, research results, or case studies. For example, presenters wishing to describe a commercial solution should focus on the underlying technology and not attempt a product demonstration. The RIPE PC accepts proposals for different presentation formats, including plenary session presentations, tutorials, workshops, BoFs (Birds of a Feather sessions) and lightning talks. See the full descriptions of these formats at https://ripe67.ripe.net/programme/i-want-to-present/presentation-formats/ Presenters who are proposing a panel or BoF are encouraged to include speakers from several (perhaps even competing) companies and/or a neutral facilitator. In addition to presentations selected in advance for the plenary, the RIPE PC also offers several time slots for "lightning talks", which are selected immediately before or during the conference. The following general requirements apply: * Proposals for plenary session presentations, BoFs, panels, workshops and tutorials must be submitted for full consideration no later than 4 August 2013, using the meeting submission system (https://ripe67.ripe.net/submit-topic/). Proposals submitted after this date will be considered on a space-available basis. * Lightning talks should also be submitted using the meeting submission system (https://ripe67.ripe.net/submit-topic/) and can be submitted just days before the RIPE Meeting starts or even during the meeting week. The allocation of lightning talk slots will be announced in short notice - in some cases on the same day but often one day prior to the relevant session. * Presenters should indicate how much time they will require. See more information on time slot allocations per presentation format (https://ripe67.ripe.net/programme/i-want-to-present/presentation-formats/) * Proposals for talks will only be considered by the PC if they contain at least draft presentation slides (slides may be updated later on). For panels, proposals must contain a clear description, as well as the names of invited panelists, presenters and moderators. * Due to potential technical issues, it is expected that most, if not all, presenters/panelists will be physically present at the RIPE Meeting. If you have any questions or requests concerning content submissions, please email pc [at] ripe [dot] net.

1 0

Garbage Measurements
by Michael Stevens 26 Aug '13

26 Aug '13

Hello, at the moment I'm seeing a lot of measurements on my both probes, that doesn't have any live target and, sometimes, have even invalid targets like 2001:db8:0:dead:beef::1 which is part of the IPv6 for documentation purposes. I've made a screenshot here: http://i.imgur.com/PRXHsOZ.png Can someone from RIPE check this out? Not sure if there is someone abusing RIPE Atlas in a nasty way. Michael

5 5

Crediting for probe uptime
by Robert Kisteleki 23 Aug '13

23 Aug '13

Dear All, In the last two days we noticed a hickup in the crediting procedure (the one that gives credits to probe hosts and sponsors). We believe the proper fix is in place now. We just finished crediting everyone for the time period in question, which means all of the probes generated more than usual credits -- compensating for the missing ones lately, and some interest :-) We apologise for the inconvenience this may have caused. Regards, Robert Kisteleki

1 0

On RIPE Labs: Future of the RIPE NCC technical services
by Vesna Manojlovic 23 Aug '13

23 Aug '13

Dear colleagues, please take a look at the Labs article by Kaveh Ranjbar, which touches upon the future of the RIPE Atlas services: https://labs.ripe.net/Members/kranjbar/future-of-ripe-ncc-technical-services Regards, Vesna

1 0

IPv6 Report - Blank
by Tom Kacprzynski 22 Aug '13

22 Aug '13

Hello, Is anyone else having the issue of downloading IPv6 measurement reports? I ran few of them and the file is empty. I tried downloading both formats JSON and Fragment. I also tried downloading the public measurement without any luck either. Thanks -- *Tom Kacprzynski*

2 2

Geo locations confirmed
by Marco Davids (SIDN) 20 Aug '13

20 Aug '13

Hi, Are any of the geo-locations of Atlas probes confirmed, double-checked, or verified by RIPE? Or do we just have to take for granted, whatever the owner of the probe enters in the probe's settings ? Thanks, -- Marco

2 1

v3 Probe got disconnected and won't reconnect
by Axel Fischer 14 Aug '13

14 Aug '13

Hi, on 2013-08-11 at 05:15:30 UTC one of our probes (ID: 11707) got disconnected. It is connected via a switch to a router within our network. I can see the link up (it remained up all the time) but see the 3rd LED (Network Test) and 4th LED (Connecting) blinking. The MAC was visible on the switch port and router. I powercycled the probe but no change except that the MAC is no longer visible on the router. With a laptop instead of the probe it works fine. Is the probe broken? How can this state be fixed? Regards, Axel -- Axel Fischer Network Engineer 1&1 Internet AG Brauerstrasse 48 D-76135 Karlsruhe http://www.1und1.de (AS8560) Hauptsitz Montabaur, Amtsgericht Montabaur, HRB 6484 Vorstand: Ralph Dommermuth, Frank Einhellinger, Robert Hoffmann, Andreas Hofmann, Markus Huhn, Hans-Henning Kettler, Uwe Lamnek, Jan Oetjen, Christian Würst Aufsichtsratsvorsitzender: Michael Scheeren Member of United Internet Diese E-Mail kann vertrauliche und/oder gesetzlich geschützte Informationen enthalten. Wenn Sie nicht der bestimmungsgemäße Adressat sind oder diese E-Mail irrtümlich erhalten haben, unterrichten Sie bitte den Absender und vernichten Sie diese Email. Anderen als dem bestimmungsgemäßen Adressaten ist untersagt, diese E-Mail zu speichern, weiterzuleiten oder ihren Inhalt auf welche Weise auch immer zu verwenden. This E-Mail may contain confidential and/or privileged information. If you are not the intended recipient of this E-Mail, you are hereby notified that saving, distribution or use of the content of this E-Mail in any way is prohibited. If you have received this E-Mail in error, please notify the sender and delete the E-Mail.

3 2

Probe sharing
by Martin Stanislav 08 Aug '13

08 Aug '13

Hi, This spring RIPE Atlas update [1] introduced a new feature called probe sharing. Probe sharing should work for colleagues within the same LIR and is to be set via: "My Probes" -> "Probe's Settings" -> "General Configuration" -> Select your LIR in the "Share with" field. I've set the "Share with" field to our LIR ID for all three local probes. But a colleague of mine, in spite of being able to login to the Lirportal, sees an error message below every time he tries to access the probe list at https://atlas.ripe.net/atlas/myprobes.html The error message: "You are not logged in as a RIPE NCC member". Is there anything I've missed? Possible delay in privilege propagation from the Lirportal to Atlas section? Thanks. Martin [1] https://labs.ripe.net/Members/kistel/new-ripe-atlas-features-april-2013

4 4