- ripe-atlas - mailman.ripe.net

DNS results visualisation
by Dave . 22 Aug '17

22 Aug '17

Hi, For the traceroute results there is a icon at the right side where you can get the complete traceroute. (View Latest Result) This is beautifully presented. Could we please have a similar icon for DNS results? Thanks, Dave Boonstra

2 2

measurement UI on 12hour clock?
by Rene Wilhelm 22 Aug '17

22 Aug '17

See attached screenshot. I created a couple of measurements which were to start at 16:05 local time, 14:05 UTC. The measurement page https://atlas.ripe.net/measurements however states a start time of 22-08-2017 02:05 UTC which is of course 12 hours in the past and had me worried for a bit I made a mistake filling in the form. Can this be fixed? it is confusing and looks a bit clumsy :) -- Rene

2 1

[rfc-editor@rfc-editor.org: RFC 8193 on Information Model for Large-Scale Measurement Platforms (LMAPs)]
by Stephane Bortzmeyer 22 Aug '17

22 Aug '17

This recent RFC on the data model for Internet measurements platform is of course of interest for RIPE Atlas. Note that their model separates controller and collector, which are one in Atlas.

1 0

New on RIPE Labs: Processing RIPE Atlas Results with jq
by Mirjam Kuehne 21 Aug '17

21 Aug '17

Dear colleagues, Please find this new article by Stephane Bortzmeyer on RIPE Labs: Processing RIPE Atlas Results with jq https://labs.ripe.net/Members/stephane_bortzmeyer/processing-ripe-atlas-res… Kind regards, Mirjam Kuhne RIPE NCC

1 0

Notify time setting does not work
by Marat Khalili 18 Aug '17

18 Aug '17

Probes have very handy feature of sending a notification when the probe is disconnected. I have mine set to 10 minutes, however last two such notifications only arrived 30 minutes after the probe was disconnected. Probe #26656 if that's important. One would think that probe itself was slow to react, but last time I monitored outage from the very beginning and the probe's page correctly showed "Disconnected for: 1 minute" and so on. Neither it is a case of slow email arrival, since according to Received header in the email it was indeed received from worker1.atlas.ripe.net 30+ minutes after disconnection time mentioned in the email body. Can it be that "Notify time" setting just doesn't work and some default value of 30 minutes is used? -- With Best Regards, Marat Khalili

4 7

Your probe is currently disconnected
by Conrad Kostecki 15 Aug '17

15 Aug '17

Hi! I've applied for an Atlas probe v3 and got one via postage. So, I've connected the probe to my network. I can see in my DNSMasq logs, that the probe gets successfully an IP address. It can be pinged without any problems. But that's all. Even after 24 hours it's still reported not connected. I can see multiple LEDs: 1 (power): on 2: off 3: slow blink 4: fast blink 5 (button): on I can't find that in the FAQ, the LEDs should light different. The FAQ also did mention to try first without USB and insert USB later. Or try to replace the USB. Both cases did not help. If I connect my ThinkPad instead the probe with the same network connection (cable and port), it can access the internet just fine without any problems.. I've no clou, what could be wrong. Any ideas? Thanks! Conrad Viele Grüße Conrad Kostecki

7 9

Updated RIPE Atlas measurements listing page
by Massimo Candela 09 Aug '17

09 Aug '17

Dear RIPE Atlas users, With the increasing number of measurements supported by RIPE Atlas, the measurement listing page [1] was slowing down. Today we deployed a new release with improved performance and functionality. The new page contains a re-arrangement of the tabs, allowing the user to more easily access the types of measurement they are interested in. The searching has also been improved, allowing more precise filtering of the measurements. If you experience any issues, try to refresh the cache for the page. And of course, let us know if you have any feedback about this change. Best regards, Massimo Candela Software Engineer - RIPE Atlas project [1] https://atlas.ripe.net/measurements/ <https://atlas.ripe.net/measurements/>

1 0

Test, please ignore
by Robert Kisteleki 08 Aug '17

08 Aug '17

1 0

Update to RIPE Atlas Anchors Article
by Michela Galante 08 Aug '17

08 Aug '17

Dear colleagues, We just published an update to the RIPE Labs article “The Next Generation of RIPE Atlas Anchors”. You can read it here: https://labs.ripe.net/Members/alun_davies/the-next-generation-of-ripe-atlas… Best regards, Michela Galante RIPE NCC

2 3

Join RIPE NCC Hackathon Version 6, 4-5. November, Copenhagen, Denmark
by Vesna Manojlovic 08 Aug '17

08 Aug '17

Dear colleagues, The sixth RIPE NCC hackathon will take place on Saturday and Sunday, 4-5 November 2017 in Copenhagen, Denmark. The topic is: IPv6! We're looking for creative thinkers: front-end developers, UI designers, network operators, researchers, hackers and other enthusiastic coders, to help us develop new tools that would enable deployment of IPv6 and visualizations based on IPv6 measurements data. All source code developed during the hackathon will be publicly licensed and available on GitHub, and will be free for the entire community to use. -------------------- How to Apply -------------------- Interested? Learn more and apply online today! https://atlas.ripe.net/hackathon/version6/#!application-form *The application deadline is 9.9.* (9th September) We look forward to seeing you there! Find out more in this RIPE Labs article: https://labs.ripe.net/Members/becha/join-the-ripe-ncc-hackathon-version-6 Regards, Vesna Manojlovic Community Builder RIPE NCC

1 0