November 2018 - ripe-atlas - mailman.ripe.net

Meta-information dumps for built-in measurements?
by Vasileios Giotsas 09 Nov '20

09 Nov '20

Is there any repository like https://ftp.ripe.net/ripe/atlas/measurements/ that contains meta-information about built-in RIPE Atlas measurements (the above repository contains meta-information only for public measurements)? I couldn't find anything similar in the new FTP repository at https://data-store.ripe.net/datasets/atlas-daily-dumps/ I guess using the API is an alternative but it would be more convenient to have such dumps Thanks, Vasileios

15 24

shared fate for my two probes
by Jay Borkenhagen 08 Feb '19

08 Feb '19

Hi, My two RIPE Atlas probes have been acting strangely over the past several months. Very frequently I receive automatic notices from the RIPE Atlas system that both of my probes have been "disconnected from the RIPE Atlas infrastructure" essentially simultaneously. Here's the history from 2018: probe 11171 2018-02-23 18:08:57 UTC. probe 11203 2018-02-23 18:10:23 UTC. probe 11171 2018-06-21 04:32:15 UTC. probe 11203 2018-06-21 04:30:59 UTC. probe 11171 2018-06-24 05:36:57 UTC. probe 11203 2018-06-24 05:37:04 UTC. probe 11171 2018-07-31 20:25:27 UTC. probe 11203 2018-07-31 20:25:32 UTC. probe 11171 2018-08-18 04:48:20 UTC. probe 11171 2018-09-15 02:31:26 UTC. probe 11203 2018-09-15 02:31:28 UTC. probe 11171 2018-10-15 23:03:50 UTC. probe 11203 2018-10-15 23:04:06 UTC. probe 11171 2018-11-16 14:42:28 UTC. probe 11203 2018-11-16 14:42:33 UTC. (Those last three events are eerily periodic.) Each time when I am finally able to visit inspect the probes (both are reported as "Firmware Version 4940 (1100)"), their LEDs are in the same state: --------------- Looking at the units with the on/off LED to the left: (1) the left-most (on/off) LEDs are on steadily. (2) the next LED is off. the next two LEDs are flashing at different frequencies: (3) the next flashes on approx. 48 times per minute (4) the next flashes on approx. 110 times per minute (5) the centers of the wide "WPS/RESET" LEDs are on steadily. --------------- Once these probes fail they remain offline until I try turning it off and on again. The probes are powered similarly: the RIPE-provided USB cable is plugged into an Apple iPhone USB power adapter, in turn plugged into a standard US 120v / 60 Hz AC receptacle. However, the AC power circuits feeding these receptacles come from two very different sources which should not share fate. Until today both probes have been plugged into ports on the same Cisco switch, but after today's disconnect I moved probe 11203 to a different physical switch that has the same VLANs. None of my other equipment experiences any troubles around the times when these events happen to my RIPE Atlas probes. In the past I have reported these events to atlas(a)ripe.net, but I doubt that the causes cited (e.g. "the problem is with your dns") have been accurate. (I do not blame the atlas(a)ripe.net folks who have responded. Something strange is happening here, and I haven't yet cracked it.) I'm curious whether anyone else sees similar behaviors, or has suggestions for ways to determine what is happening. Thanks! Jay B.

3 5

New on RIPE Labs: RIPE Atlas Probes: Delays in Distribution
by Mirjam Kuehne 08 Feb '19

08 Feb '19

Dear colleagues, The good news: RIPE Atlas is growing both in terms of geographical diversity and ASN coverage. What's more, RIPE Atlas is evolving, with a new generation of probe hardware having already passed the test phase and a pilot programme underway to assess the viability of VM anchors. The not so good news: With RIPE Atlas so much in demand, and with our current provider having ceased manufacturing the probe hardware, we've had to dramatically reduce the number of probes we're distributing. Please find more details on RIPE Labs: https://labs.ripe.net/Members/alun_davies/ripe-atlas-probes-delays-in-distr… Kind regards, Mirjam Kühne RIPE NCC

5 5

DNS Measurement Grouping by NSID
by Klaus Darilion 30 Nov '18

30 Nov '18

Hi! IIRC, the map of the DNS measurement allowed to group the dataset by NSID. Was this feature removed? OR is it now somewhere else? I.e.: https://atlas.ripe.net/measurements/17175212/?filter=&diversity-picker=3&ag… Thanks Klaus

4 6

Minor change to Atlas anchor DNS resolver configuration
by Anand Buddhdev 28 Nov '18

28 Nov '18

Dear colleagues, Each RIPE Atlas anchor runs a DNS resolver. This resolver is configured as the primary resolver for the anchor, with the following directive at the top of the resolver configuration (/etc/resolv.conf): nameserver 127.0.0.1 For ease of configuration management, we are changing this directive to: nameserver ::1 This change will not affect DNS resolution on the anchors in any way. However, any measurement that does DNS lookups using the anchor's primary resolver will contain "::1" instead of "127.0.0.1" in "src_addr" field of results. If you're using any code to parse such results, and specifically looking for "127.0.0.1", you'll need to adjust your code to also look for "::1". Regards, Anand Buddhdev RIPE NCC

1 0

no measurements
by Teun Vink 20 Nov '18

20 Nov '18

Hi, Are there any problems with the Atlas backend? All requests are answered with {u'info': u'Something went wrong with our back-end', u'type': u'redis- fail'} I don't see any working measurements in our webportal as well. Best regards, -- Teun Vink BIT | teun(a)bit.nl | +31 318 648 688 KvK: 09090351 | GPG: 0xFC8B25D6 | RIPE: TEUN-RIPE

2 3

New on RIPE Labs: Announcing RIPE Atlas VM Anchors
by Alun Davies 12 Nov '18

12 Nov '18

Dear colleagues, We just this morning published an article announcing that, as of today, we are accepting applications for anyone interested in hosting RIPE Atlas VM anchors. The article points you to all the information you’ll need to apply for and install a virtual anchor: https://labs.ripe.net/Members/alun_davies/announcing-ripe-atlas-vm-anchors <https://labs.ripe.net/Members/alun_davies/ripe-atlas-anchor-vms> Kind regards, Alun Davies RIPE NCC

5 6

Temporary problem with RIPE Atlas measurement creation
by Chris Amin 01 Nov '18

01 Nov '18

Dear RIPE Atlas users, Due to a complication during a deploy, there was a problem scheduling RIPE Atlas measurements from approximately 12:50 to 14:14 UTC. Most new measurements created during this time will not have been scheduled properly. The issue is now fixed for new measurements, so if your measurements didn't work during this time you can try to create them again and it should work. Apologies for any inconvenience caused. Regard, Chris Amin RIPE NCC

1 0