April 2016 - ripe-atlas - mailman.ripe.net

Plan to Implement RIPE Atlas WiFi Measurements
by Robert Kisteleki 09 Oct '17

09 Oct '17

Dear colleagues, We wanted to update the community and let you know that we plan to start work on the proposed experiment with WiFi measurements in mid-2016. As we communicated in a recent RIPE Labs article, we will work with GÉANT as a test partner to learn more about the operational effects of introducing WiFi measurements to the RIPE Atlas system, in addition to the benefits we believe this could provide for the entire RIPE Atlas community. Please see the article for more details if you are interested: https://labs.ripe.net/Members/suzanne_taylor_muzzin/ripe-atlas-wifi-measure… We will continue to update you once we’ve begun work on this plan, and we welcome your comments in the meantime. Regards, Robert Kisteleki RIPE NCC

3 3

RIPE Atlas Interface Hackathon, 21-22 May, Copenhagen
by Vesna Manojlovic 23 Jan '17

23 Jan '17

Dear colleagues, Calling all front-end developers, UI designers, network operators and other enthusiastic coders! The next RIPE Atlas hackathon takes place 21-22 May in Copenhagen, the weekend before the RIPE 72 Meeting. We're looking for creative thinkers to help us develop new interfaces for RIPE Atlas. All source code developed during the hackathon will be publicly licensed and available on GitHub, and will be free for the entire community to use. -------------------- How to Apply -------------------- Interested? Learn more and apply online today! https://atlas.ripe.net/hackathon/Interface/?pk_campaign=hackathon&pk_kwd=li… *The application deadline is 23 March* Please note that we are unfortunately unable to provide travel or accommodation funding. We look forward to seeing you there! Regards, Vesna and the RIPE Atlas Team

1 4

Probe marked as offline, but it's online...
by Christian Schrötter 10 Nov '16

10 Nov '16

Hello Atlas users! I've connected my probe to a new network environment, to test everything before the big migration starts. It came up again immediately and displayed it's new network details at the WebUI. For the first time there was an IPv6-ULA prefix visible. The router (OpenWrt 15.05) supports full IPv6 via tunnel, but it's not advertised to the probe's VLAN and blocked by firewall rules. Everything seems to work, good! I've switched it off/on for several times, went back to the old router/modem and powered it on again. After some hours I've checked the WebUI again: My probe is offline! :-( I've tested it again on the new router: Offline! Once again on the old setup: Offline! Untouched default router/modem from my ISP: Offline! Current LED status: (from 1-5; power to button) > on > off > slow blink > on > on SOS-DNS-history from Wireshark: (switch port mirrored to my analysis interface) > Standard query 0x0002 AAAA U.*************.sos.atlas.ripe.net > Standard query response 0x0002 AAAA 2001:67c:2e8:11::c100:1337 > Standard query 0x0003 A U.*************.sos.atlas.ripe.net > Standard query response 0x0003 A 193.0.19.55 The probe is online and communicates with many servers. Looks like the built-in tests are running fine. There is NTP, DNS, ICMP, UDP and HTTP traffic. But it's still offline at the WebUI. I've double and triple checked everything on my side. Any ideas what's going wrong? -- With kind regards, Christian Schrötter

2 4

Fwd: Probe 2317 is down (home fibre)
by Colin Johnston 25 Jul '16

25 Jul '16

seems fine to me ? dont have connectivity to ripe site though from BT network range in uk what is telia upto ? Colins-iMac:~ colinj$ traceroute www.ripe.net traceroute to www.ripe.net (193.0.6.139), 64 hops max, 52 byte packets 1 bthomehub (192.168.1.254) 1.913 ms 1.078 ms 1.078 ms 2 * * * 3 * * * 4 31.55.185.196 (31.55.185.196) 16.187 ms 15.477 ms 15.443 ms 5 195.99.127.142 (195.99.127.142) 15.557 ms 195.99.127.130 (195.99.127.130) 16.274 ms 195.99.127.128 (195.99.127.128) 16.602 ms 6 vhsaccess2-pos1-0.faraday.fixed.bt.net (195.99.127.9) 16.979 ms 16.611 ms 195.99.127.25 (195.99.127.25) 17.097 ms 7 166-49-211-240.eu.bt.net (166.49.211.240) 16.413 ms 166-49-211-236.eu.bt.net (166.49.211.236) 16.225 ms 166-49-211-238.eu.bt.net (166.49.211.238) 15.821 ms 8 213.248.82.249 (213.248.82.249) 16.880 ms 15.785 ms 15.470 ms 9 ldn-bb2-link.telia.net (62.115.137.194) 16.633 ms 213.248.82.249 (213.248.82.249) 15.631 ms 15.400 ms 10 ldn-bb3-link.telia.net (80.91.248.90) 15.776 ms ldn-bb2-link.telia.net (213.155.136.62) 16.815 ms adm-bb4-link.telia.net (62.115.142.221) 22.936 ms 11 adm-b2-link.telia.net (62.115.141.51) 25.759 ms adm-b2-link.telia.net (80.91.253.182) 22.263 ms adm-b2-link.telia.net (62.115.141.17) 21.979 ms 12 adm-b2-link.telia.net (80.91.253.182) 22.481 ms adm-b2-link.telia.net (62.115.141.9) 22.344 ms adm-b2-link.telia.net (62.115.141.63) 27.606 ms Colin > Begin forwarded message: > > From: RIPE Atlas (no reply) <no-reply(a)ripe.net> > Subject: Probe 2317 is down (home fibre) > Date: 21 June 2015 20:30:07 BST > To: colinj(a)mx5.org.uk > > Dear Dear colin johnston, > > Your probe 2317 has been disconnected since 2015-06-21 18:49:16 UTC. > > This is an automatically generated email from RIPE Atlas. It was sent to you because you asked to be notified if your probe becomes disconnected for more than 30 minutes. > > If you want to change this, or disable this notification altogether, please go to https://atlas.ripe.net/probes/2317/, and click the "edit" button under "Notifications". > > Kind regards, > > RIPE Atlas Team > atlas(a)ripe.net

5 7

USB drive
by Michael Ionescu 13 May '16

13 May '16

Hi all, I have a probe that's been down for several days now. I did contact RIPE about it, but support has been superficial. I also didn't yet find the level of technical detail I need in the information on the website and in this list's archives. The 8GB drive, when reformatted on a windows box with FAT32 as per support instructions, surprisingly only comes out with a 1GB partition. Inspecting the drive under linux, I find multiple partitions, with only the first containing an a fat32 filesystem: Platte /dev/sdc: 7927 MByte, 7927234560 Byte 244 Köpfe, 62 Sektoren/Spur, 1023 Zylinder, zusammen 15482880 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Festplattenidentifikation: 0xc3072e18 Gerät boot. Anfang Ende Blöcke Id System /dev/sdc1 2048 2099199 1048576 b W95 FAT32 /dev/sdc2 2099200 4196351 1048576 83 Linux /dev/sdc3 4196352 6293503 1048576 83 Linux On first glance, the others contain ext2 filesystems # fsck -N /dev/sdc? fsck von util-linux 2.20.1 [/sbin/fsck.vfat (1) -- /dev/sdc1] fsck.vfat /dev/sdc1 [/sbin/fsck.ext2 (2) -- /dev/sdc2] fsck.ext2 /dev/sdc2 [/sbin/fsck.ext2 (3) -- /dev/sdc3] fsck.ext2 /dev/sdc3 but on further inspections do not contain a valid magic number in their superblocks, so they are effectively unformatted. I would therefore suspect that they are not being used by the probe. Now the question: What is the correct layout supposed to look like (primary/secondary, size, ID, FS-type)? I would like to get my probe back up and running. Bonus question: What can I expect to find in point of files/data on the drive, that would tell me whether the probe was working correctly until I cut power and removed the drive? Thanks, Michael

3 6

LatencyMON Widget Y axis in milliseconds
by Marat Khalili 10 May '16

10 May '16

I'm using LatencyMON <https://atlas.ripe.net/docs/tools-latencymon/> widget to monitor my network performance. It's very convenient. Unfortunately, it always loads with latency shown in %% (of what?), not in milliseconds, so I have to make one extra click in order to view actual milliseconds. Is there some hidden switch that would make milliseconds the default? Shouldn't it be initially default in the first place? -- With Best Regards, Marat Khalili

2 4

An article/FAQ entry about probe troubleshooting
by Ondřej Caletka 01 May '16

01 May '16

Hi all, it seems that failing probes are getting more and more to be an issue, possibly due to USB flash drive failure. I think it would be nice if there was an article / FAQ entry with some official troubleshooting procedures, so we could just send a link to anybody complaining about non functional probe. Is there something like this on the roadmap? Perhaps we as the community could make something up: - how to check whether the port probe is connected to has proper IP and DNS parameters and is allowed to establish a SSH session to TCP port 443 in the Internet (beware of DPI firewalls that allow HTTPS but not SSH over 443) - how to check the LED status and the SOS list at the probe page (the current LED explanation in the FAQ is too techy and even power users like me still don't understand all presented states :) ) - how to diagnose USB flash drive failure, how to force reformatting the flash drive and how to replace it with a new one What do you think? Cheers, Ondřej Caletka CESNET

9 11

Atlas probe down and probe replacement
by Vladimir-M. Obelic 30 Apr '16

30 Apr '16

After a power outage i'm not getting the probe up. It's not even trying DHCP. What is the procedure for a probe replacement? Thanks Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum

2 4

New on RIPE Labs: How Elasticsearch and Kibana Help us Analyse RIPE Atlas Data Logs
by Mirjam Kuehne 29 Apr '16

29 Apr '16

Dear colleagues, RIPE Atlas backend applications run on more than 40 servers. Each day these machines can produce thousands of application logs of any kind of severity level. In order to be able to track down serious errors, warnings or even unusual behaviour, we decided some time ago to try Elasticsearch as a logging sink. In this article we will look at the design of such a system and describe how we can easily make sense from an ocean of logs: https://labs.ripe.net/Members/andreas_strikos/how-elasticsearch-and-kibana-… Kind regards, Mirjam Kuehne RIPE NCC

1 0

Failure Rate on Atlas Probes
by Jonathan Brewer 22 Apr '16

22 Apr '16

Hi All, What's the known failure rate of Atlas probes, and the mean time before failure? At a guess 20% or more of the probes I've been working with have failed within their first year of deployment. Sometimes they come back with a power cycle, sometimes they don't. Regards, Jon

1 0