April 2012 - ripe-atlas - mailman.ripe.net

Feature-suggestion: "round-robin" probes
by Alexander Mayrhofer 11 Jun '12

11 Jun '12

Hello, i'm figuring how RIPE atlas could be most useful for assisting in monitoring our Ancast Network, and came up with the following idea: The Atlas network has a big advantage over other monitoring /measurement networks, which is obviously its sheer size (and topological diversity). Rather than using the Atlas network for pure performance measurements, i would love to be able to use Atlas for reachability measurements (and understand which Anycast location attracts traffic from which region, and how this changes over time). These reachability / topology discovery measurements do not need to be nearly as frequent as the performance measurements, but should utilize all available probes. So, instead of being able to use 10 probes to run a continous performance test (say, DNS query every 300 seconds), i would rather like to be able to use a very high number of probes (best case: "all"), but have each of the probe eg. perform just one traceroute per day (or, even once per week would be enough). This would give me an excellent overview about the topology, but is not possible using the current limits of the UDMs. However, instead of allowing users to allocate measurements to a much higher number of probes, this functionality would also be possible be adding some "probe round-robin" feature to the control infrastructure, for example "randomly allocate a new set of probes every xx seconds". If that feature would exist, i could implement the above reachability test with the following parameters: Test: traceroute Number of probes: 10 Measurement interval: 3600 Swap probe-set interval: 10800 (NEW feature) (which would re-allocate new probes every 3 hours, theoretically working through all 1500 probes about every month?). An obvious alternative would be functionality where i could "queue" "single-shot" measurements for the whole network (since chances are low i would get every probe if they are randomly assigned). comments? Suggestions? Alternatives? Alex Mayrhofer Head of R&D nic.at

5 13

Routing glitch between BSNL and F Root
by Anurag Bhatia 26 Apr '12

26 Apr '12

Hello, There has been some routing glitch in the F root server instance running in Chennai, India by niXi AS 24049. Govt. owned BSNL AS9829 routers are not hearing any BGP announcements and thus F root does not works at all on BSNL. anurag@laptop ~ $ traceroute f.root-servers.net -A traceroute to f.root-servers.net (192.5.5.241), 30 hops max, 60 byte packets 1 192.168.1.1 (192.168.1.1) [AS8151/AS28513] 1.552 ms 2.040 ms * 2 117.207.48.1 (117.207.48.1) [AS9829] 26.010 ms 28.433 ms 31.136 ms 3 218.248.173.42 (218.248.173.42) [AS9829] 34.497 ms 35.968 ms 38.372 ms 4 218.248.250.86 (218.248.250.86) [AS9829] 91.784 ms 94.430 ms 96.794 ms 5 * * * 6 * * * 7 * * * 8 * * * I have been hosting RIPE Probe #1032 and here is F Root connectivity data from proble: [image: Inline image 1] As we can see root server is not accessible at all from Jan and even in Nov, Dec last year it was available with over 300ms latency which indicates network was not using Chennai anycast node since latency between this test probe placed in Haryana (North India) and Chennai (South India) should be around 70ms. Thanks. -- Anurag Bhatia anuragbhatia.com or simply - http://[2001:470:26:78f::5] if you are on IPv6 connected network! Twitter: @anurag_bhatia <https://twitter.com/#!/anurag_bhatia> Linkedin: http://linkedin.anuragbhatia.com -- This message has been scanned by Kaspersky Anti-Virus. For more information about data security please visit http://www.kaspersky.com and http://www.viruslist.com

3 4

Request for RIPE Atlas probe DHCP change.
by Leo Bicknell 23 Apr '12

23 Apr '12

Could the RIPE Atlas probe DHCP client please be configured to send a ClientID, perhaps "RIPEAtlasProbe"? Many home gateways show a list of DHCP clients and list the client ID. It would make it much easier to identify which device is which using these tools. -- Leo Bicknell - bicknell(a)ufp.org - CCIE 3440 PGP keys at http://www.ufp.org/~bicknell/

4 5

ATLAS as mechanism for route policy discovery
by Alexander Asimov 23 Apr '12

23 Apr '12

Hello. During last decade much attention was paid to topology discovery at inter-domain routing level. But most of these projects are only targeted on physical links discovery; at the same time there was little opportunity to check the real use of links by single AS. The knowledge of Autonomous System relationships from single AS view could be used in many cases. For example it could be used during designing AS or for traffic flow engineering purposes. In case to solve this problem we have invented several active probing algorithms for discovering real routing policy map from single AS view. One of them is based on using spoofed source IP. We send an echo request with record route option and source IP from our address space and as the result we can see the part of reverse trace from destination. This helps to understand which links are used by our AS. It is a kind of snapshot. This information is used in iteration process and the all data results in model of AS relationships which could be reversed to single view for every AS. At the current moment we cover with help of our nodes about 40% of transit AS, but with help of RIPE Atlas we will be able to cover more than 90%, and give back to community a tool for traffic flow prediction at interdomain routing level. Spoofing is obviously bad in most of cases, but not this time. We need opportunity to strictly spoof only one IP from our address space. The list technical requirements of our proposal: 1. 178.248.239.238 always will be used as spoofed address; 2. There will be about 15 experiments every day; 3. Each experiment will last not more than 10 minutes; 4. The total approximate packet generation activity from all nodes will be about 500 packets per second; 5. We need opportunity to have different measurement plans (list of destinations) on different nodes. We work with Planet Lab nodes in the same way: every day there is a new .gz archive with list of targets for all nodes, every node unpacks it and use then only a sublist of destinations, but the packet generation script is same on all nodes. We're open to discussion on procedures described above. Best regards, Alexader Asimov

1 0

Measure DNS resolve times
by Daniel AJ Sokolov 10 Apr '12

10 Apr '12

Hello, My ISP has changed something and as a result DNS lookups have slowed down considerably. How would I set up a User Defined Measurements to perform certain lookups on a nameserver and measure the response times? Thank you Daniel AJ -- Follow me on twitter @newstik http://twitter.com/newstik

3 2

RIPE Atlas User-Defined Measurements Are Here!
by Ann Barcomb 04 Apr '12

04 Apr '12

Dear Atlas Hosts and Sponsors, We are pleased to announce our first roll-out of user-defined measurements (UDM) for RIPE Atlas. As of today, all hosts and sponsors on this mailing list are invited to run custom measurements. Over the coming weeks we will continue to roll out UDM to a wider audience. To access UDM, either click on the link at the top right when you are logged in to the RIPE Atlas website, or go directly to: https://atlas.ripe.net/atlas/udm.html For the time being, we have created a fairly low rate limit, which we expect to increase over time. More information about limits and other aspects of the UDM system can be found in the documentation: https://atlas.ripe.net/doc/udm Discussion and questions about UDM can be directed to this mailing list (ripe-atlas(a)ripe.net) or to atlas-dev(a)ripe.net. You may also be interested in joining us at the UDM "Birds of a Feather" (BoF) session at RIPE 64 in Ljubljana, on Thursday, 19 April after the Measurements, Analysis and Tools (MAT) Working Group session. https://ripe64.ripe.net/programme/meeting-plan/bof/ Happy measuring! - The RIPE Atlas team

9 18

labs.ripe.net dead?
by damkol＠gmail.com 04 Apr '12

04 Apr '12

Hello. 29.03.2012 labs.ripe.net stopped respond to icmp. https://zpm02.atlas.ripe.net/atlas/rrd.png?prb_id=741&msm_id=1007&type=week… >From other places with other internet connections also not respond to icmp. -- damkol(a)gmail.com

3 2

Re: [atlas] Probe 2317 is down
by Colin Johnston 02 Apr '12

02 Apr '12

fixed internal network :) Can a request for enhancement be made for notification of probe goes up to the owner email ? Colin On 31 Mar 2012, at 08:30, RIPE Atlas wrote: > Dear colin, > > Your probe 2317 is down since 2012-03-31 06:56:49 UTC > > This is an automatically generated email from RIPE Atlas. It was sent to you because you asked to be notified if your probe goes is down for more than 30 minutes. > > If you want to change this, or disable this notification altogether, please go to https://atlas.ripe.net/atlas/myprobes.html, click on probe 2317, in the opened tab select Probe's Settings -> Notifications and change your settings. > > Atlas team

2 1

change ownership of probe
by Thanos Tsakalos 02 Apr '12

02 Apr '12

Hello to all, Is there a way to change the ownership of a probe? Will it be ok if the probe is re-registered under the new email address (mac and pin are known) ? Or is there any other method to do it properly? Thank you, Triantafyllos

2 1