Dear Bob, I answer inline. Thank you for your comments. P.D. It seems that I have no rights to send emails to the Measurement Analysis and Tools Working Group: how I can join it? _______________________________________________________________ Dr. Ing. José Ignacio Alvarez-Hamelin CONICET and Facultad de Ingeniería, Universidad de Buenos Aires Av. Paseo Colón 850 - C1063ACV - Buenos Aires - Argentina +54 (11) 5285 0716 / 5285 0705 e-mail: ihameli@cnet.fi.uba.ar web: http://cnet.fi.uba.ar/ignacio.alvarez-hamelin/ _______________________________________________________________
On 25 Oct 2022, at 14:02, rjmcmahon <rjmcmahon@rjmcmahon.com> wrote:
I don't understand the information in the link. It looks like lines on a map to some form of dials which are too small to read.
I suppose that depends on the zoom of your browser, try to put 100% (command+ to zoom-in in chrome). You will see a 24 hour clock where some hours are green (no congestion), yellow (some congestion) or red (congestion). But all of that is just an example.
One can sample and create a Gaussian per the central limit theorem (CLT) if the underlying process probability density functions converge, i.e. can be integrated to 1. With that said, normalizing does lose information and doesn't say much about tails, outliers, etc.
The Stable distribution is a generalization over all the distributions. Consider that Gaussian has finite moments, and heavy-tailed distribution not, this is where Stable one enters as a generalization.
We should be careful in assuming only the tails matter and that all traffic follows heavy-tailed distributions. With bufferbloat it's the minimum of the latency PDF that shifts. Codel watches a minimum. "Jacobson suggested that average queue length actually contains no information at all about packet demand or network load.[3][5] He suggested that a better metric might be the minimum queue length during a sliding time window."
Well, it depends on which point of the network you really are, but there a lot where this is true. In the other hand, no heavy tailed distributions do not cause problems if you use statistical tools that suport anything. For example, the median (Q2) converges to the mean (fist statistical moment) for Poisson distributions.
We need statistical tools that also allow for the analysis of non-parametric distributions too. Hotelling T2 assumes the multivariate distributions are Gaussian. Kolmogorov-Smirnov tests can be used for non-parametric distributions. We find both are needed for SPC used by our automation systems.
Yes, I did a lot of this kind of test, and I found very interesting things, even in the very important links (important ISP with important CDN), verifying Stable distributions with certain parameters (even some ones with heavy-tailed distributions). The problem is how to do this a low computable cost, and this why you can use quartiles.
Sample subgroups of one really don't give sufficient information about any type of distribution, parametric or non-parametric.
Here I cannot understand: which are the subgroups?
Bob
Dear all, After some time in silence on the IPPM list, I like to make some comments here. As we presented in the draft-ietf-ippm-route-00 (now the RFC9198), the main problem is the traffic follows heavy-tailed distributions when it is seen from the end-to-end points: the origin of most of the issues in that video. Therefore, treating it as parametric distribution is not possible, unless you are dealing with a complex distribution like the Stable distribution: • B. Mandelbrot, “New methods in statistical economics,” Journal of political economy, vol. 71, no. 5, pp. 421–440, 1963. • ——, “The variation of certain speculative prices,” The journal of business, vol. 36, no. 4, pp. 394–419, 1963. (and so it will be extremely complex a high computing demands.) This is why we propose to use quartiles to characterize delays in the RFC9198. Then, I am doing some research to understand how the delay can change with network load, using the quartiles. You can see some measurements done during the pandemic, showing the congestion as a function of the time (24 hours maximum): https://cnet.fi.uba.ar/ignacio.alvarez-hamelin/RIPE-Atlas-measurement-246814... [you can zoom in and out, pan it, clicking on the Xs you can close dialogs, to reopen them click on the link] Best, Ignacio ___________________________________ _______________________________________________________________ Dr. Ing. José Ignacio Alvarez-Hamelin CONICET and Facultad de Ingeniería, Universidad de Buenos Aires Av. Paseo Colón 850 - C1063ACV - Buenos Aires - Argentina +54 (11) 5285 0716 / 5285 0705 e-mail: ihameli@cnet.fi.uba.ar web: http://cnet.fi.uba.ar/ignacio.alvarez-hamelin/ _______________________________________________________________
On Oct 23, 2022, at 02:17, Glenn Fishbine via Rpm <rpm@lists.bufferbloat.net> wrote: As a classic died in the wool empiricist, granted that you can identify "misery" factors, given a population of 1,000 users, how do you propose deriving a misery index for that population? We can measure download, upload, ping, jitter pretty much without user intervention. For the measurements you hypothesize, how you you automatically extract those indecies without subjective user contamination. I.e. my download speed sucks. Measure the download speed. My isp doesn't fix my problem. Measure what? How? Human survey technology is 70+ years old and it still has problems figuring out how to correlate opinion with fact. Without an objective measurement scheme that doesn't require human interaction, the misery index is a cool hypothesis with no way to link to actual data. What objective measurements can be made? Answer that and the index becomes useful. Otherwise it's just consumer whining. Not trying to be combative here, in fact I like the concept you support, but I'm hard pressed to see how the concept can lead to data, and the data lead to policy proposals. [SM] So it seems that outside of seemingly simple to test throughput numbers*, the next most important quality number (or the most important depending on subjective ranking) is how does latency change under "load". Absolute latency is also important albeit static high latency can be worked around within limits so the change under load seems more relevant. All of flent's RRUL test, apple's networkQuality/RPM, and iperf2's bounceback test offer methods to asses latency change under load**, as do waveforms bufferbloat tests and even to a degree Ookla's speedtest.net. IMHO something like latency increase under load or apple's responsiveness measure RPM (basically the inverse of the latency under load calculated on a per minute basis, so it scales in the typical higher numbers are better way, unlike raw latency under load numbers where smaller is better). IMHO what networkQuality is missing ATM is to measure and report the unloaded RPM as well as the loaded the first gives a measure over the static latency the second over how well things keep working if capacity gets tight. They report the base RTT which can be converted to RPM. As an example: macbook:~ user$ networkQuality -v ==== SUMMARY ==== Upload capacity: 24.341 Mbps Download capacity: 91.951 Mbps Upload flows: 20 Download flows: 16 Responsiveness: High (2123 RPM) Base RTT: 16 Start: 10/23/22, 13:44:39 End: 10/23/22, 13:44:53 OS Version: Version 12.6 (Build 21G115) Here RPM 2133 corresponds to 60000/2123 = 28.26 ms latency under load, while the Base RTT of 16ms corresponds to 60000/16 = 3750 RPM, son on this link load reduces the responsiveness by 3750-2123 = 1627 RPM a reduction by 100-100*2123/3750 = 43.4%, and that is with competent AQM and scheduling on the router. Without competent AQM/shaping I get: ==== SUMMARY ==== Upload capacity: 15.101 Mbps Download capacity: 97.664 Mbps Upload flows: 20 Download flows: 12 Responsiveness: Medium (427 RPM) Base RTT: 16 Start: 10/23/22, 13:51:50 End: 10/23/22, 13:52:06 OS Version: Version 12.6 (Build 21G115) latency under load: 60000/427 = 140.52 ms
On 23 Oct 2022, at 08:57, Sebastian Moeller <moeller0@gmx.de> wrote: Hi Glenn, base RPM: 60000/16 = 3750 RPM reduction RPM: 100-100*427/3750 = 88.6% I understand apple's desire to have a single reported number with a single qualifier medium/high/... because in the end a link is only reliably usable if responsiveness under load stays acceptable, but with two numbers it is easier to see what one's ISP could do to help. (I guess some ISPs might already be unhappy with the single number, so this needs some diplomacy/tact) Regards Sebastian *) Seemingly as quite some ISPs operate their own speedtest servers in their network and ignore customers not reaching the contracted rates into speedtest-servers located in different ASs. As the product is called internet access I a inclined to expect that my ISP maintains sufficient peering/transit capacity to reach the next tier of AS at my contracted rate (the EU legislative seems to agree, see EU directive 2015/2120). **) Most do by creating load themselves and measuring throughput at the same time, bounceback IIUC will focus on the latency measurement and leave the load generation optional (so offers a mode to measure responsiveness of a live network with minimal measurement traffic). @Bob, please correct me if this is wrong.
On Fri, Oct 21, 2022, 5:20 PM Dave Taht <dave.taht@gmail.com> wrote: One of the best talks I've ever seen on how to measure customer satisfaction properly just went up after the P99 Conference. It's called Misery Metrics. After going through a deep dive as to why and how we think and act on percentiles, bins, and other statistical methods as to how we use the web and internet are *so wrong* (well worth watching and thinking about if you are relying on or creating network metrics today), it then points to the real metrics that matter to users and the ultimate success of an internet business: Timeouts, retries, misses, failed queries, angry phone calls, abandoned shopping carts and loss of engagement. https://www.p99conf.io/session/misery-metrics-consequences/ The ending advice was - don't aim to make a specific percentile acceptable, aim for an acceptable % of misery. I enjoyed the p99 conference more than any conference I've attended in years. -- This song goes out to all the folk that thought Stadia would work: https://www.linkedin.com/posts/dtaht_the-mushroom-song-activity-698136666560... Dave Täht CEO, TekLibre, LLC -- You received this message because you are subscribed to the Google Groups "discuss" group. To unsubscribe from this group and stop receiving emails from it, send an email to discuss+unsubscribe@measurementlab.net. To view this discussion on the web visit https://groups.google.com/a/measurementlab.net/d/msgid/discuss/CAA93jw4w27a1.... _______________________________________________ Rpm mailing list Rpm@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/rpm
ippm mailing list ippm@ietf.org https://www.ietf.org/mailman/listinfo/ippm
Rpm mailing list Rpm@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/rpm