- ipv6-wg - mailman.ripe.net

ripemtg-nat64 network at RIPE71: complain here ;)
by Jen Linkova 19 Nov '15

19 Nov '15

Hi guys, As you might have noticed there is a NAT64 SSID. This thread is for complains about that network. Please use ripemtg-nat64 SSID. Please let us know if smth goes wrong. if you have network issues while using that SSID and switching to dual-stack one fixes the problem - please reply to this thread (indeed you can create a new one, I was just thinking that keeping everything in one thread might make our life easier but I might be wrong...). -- SY, Jen Linkova aka Furry

15 29

New on RIPE Labs: Lost Stars: Why Operators Switch off IPv6
by Mirjam Kuehne 18 Nov '15

18 Nov '15

Dear colleagues, One of the measurements that we have been running for a long time is IPv6 RIPEness, where we measure the IPv6 activity of the RIPE NCC members. We award members with stars if they (for example) announce their IPv6 allocation in the global routing table. We discovered that 460 RIPE NCC members had recently stopped announcing their IPv6 prefix and asked them why. Please find the results on RIPE Labs: https://labs.ripe.net/Members/nathalie_nathalie/lost-stars-why-operators-sw… Nathalie Trenaman will present this in the IPv6 working group at RIPE 71. Kind regards, Mirjam Kuehne RIPE NCC

1 0

IPv6-only network during RIPE 71
by Ondřej Caletka 10 Nov '15

10 Nov '15

Dear WG, as the RIPE 71 approaches, I would like to revive discussion about the IPv6-only network during meeting, that has been kindly provided since RIPE 67. I think the technology is mature enough to be provided as a regular RIPE NCC service during the meeting - that means regular network name and, most important, a password that is propagated in the same way the normal Wi-Fi network password is. This is especially important for the one third of newcomers that have had a big troubles learning the password of the IPV6ONLYEXP network. After RIPE 70, I proposed a "drastic" approach [1], renaming the dual-stack meeting network to -legacy and promote the NAT64 network as the default. This is the same way they do it on FOSDEM since 2014 [2]. But maybe we could try a slow start first, keeping the dual-stacked network the default and offering the NAT64 network with some suffix like -v6only. Any ideas? -- Ondřej Caletka CESNET [1]: https://www.ripe.net/ripe/mail/archives/ipv6-wg/2015-May/002632.html [2]: https://archive.fosdem.org/2015/news/2015-01-31-ipv6-only-again/

22 38

Re: [ipv6-wg] RIPE Atlas and NAT64 (Was: IPv6-only network during RIPE 71)
by Jen Linkova 03 Nov '15

03 Nov '15

On Tue, Nov 3, 2015 at 3:18 PM, Gert Doering <gert(a)space.net> wrote: >> RIPE Atlas probe is a host. It should not care much if it's traffic is >> going via NAT64 box or not. > > Actually detecting NAT64 and flagging as such, and being able to run > tests on a group of NAT64-hidden probes might add value... I think there is a dirty hack to do it now: run a measurements from v6-enabled probes to v4-only host, check the results for the destination address they were using. But I agree, it would be nice to get a list of probes behind NAT64 w/o wasting time and credits ;) -- SY, Jen Linkova aka Furry

2 1

Re: [ipv6-wg] ipv6-wg Digest, Vol 50, Issue 3
by Timothy Roy 03 Nov '15

03 Nov '15

I agree with all on this one, It is time to rock and roll with IPV6 and as was stated earlier, if someone does not like they can choose the other one. I think it will be a boost for IPV6 (if all goes well). -----Original Message----- From: ipv6-wg [mailto:ipv6-wg-bounces@ripe.net] On Behalf Of ipv6-wg-request(a)ripe.net Sent: 03 November 2015 15:00 To: ipv6-wg(a)ripe.net Subject: ipv6-wg Digest, Vol 50, Issue 3 Send ipv6-wg mailing list submissions to ipv6-wg(a)ripe.net To subscribe or unsubscribe via the World Wide Web, visit https://www.ripe.net/mailman/listinfo/ipv6-wg or, via email, send a message with subject or body 'help' to ipv6-wg-request(a)ripe.net You can reach the person managing the list at ipv6-wg-owner(a)ripe.net When replying, please edit your Subject line so it is more specific than "Re: Contents of ipv6-wg digest..." Today's Topics: 1. Re: IPv6-only network during RIPE 71 (Sander Steffann) 2. Re: IPv6-only network during RIPE 71 (Sander Steffann) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Nov 2015 11:54:33 +0100 From: Sander Steffann <sander(a)steffann.nl> To: Shane Kerr <shane(a)time-travellers.org> Cc: Marco Hogewoning <marcoh(a)marcoh.net>, "ipv6-wg(a)ripe.net IPv6" <ipv6-wg(a)ripe.net> Subject: Re: [ipv6-wg] IPv6-only network during RIPE 71 Message-ID: <72AAB357-AD25-4B1C-8BAC-4CC6F70836AE(a)steffann.nl> Content-Type: text/plain; charset=us-ascii Hi Shane, Op 3 nov. 2015, om 03:21 heeft Shane Kerr <shane(a)time-travellers.org> het volgende geschreven: > tl;dr Don't so cautious. Removing the "experimental" tag from IPv6 won't > ruin the RIPE meeting. +1 Well said :) Sander ------------------------------ Message: 2 Date: Tue, 3 Nov 2015 11:58:07 +0100 From: Sander Steffann <sander(a)steffann.nl> To: Philip Homburg <pch-ripeml(a)u-1.phicoh.com> Cc: "ipv6-wg(a)ripe.net IPv6" <ipv6-wg(a)ripe.net> Subject: Re: [ipv6-wg] IPv6-only network during RIPE 71 Message-ID: <C18918DD-63AC-4966-92C1-9CF78822E0FD(a)steffann.nl> Content-Type: text/plain; charset=us-ascii > (Can't wait for a request for Atlas to support NAT64, that's going to > be > interesting) Request! Cheers, Sander PS (in Dutch): iets met slapende honden wakker maken ;) End of ipv6-wg Digest, Vol 50, Issue 3 **************************************

1 0

: IGF Best Practice Forum document review “Creating an Enabling Environment for IPv6 Adoption"
by Marco Hogewoning 03 Nov '15

03 Nov '15

Dear colleagues, As mentioned in my email on 24 August, over the past few months we have been working on a project to document some high-level best practices on IPv6 adoption, titled “Creating an Enabling Environment for IPv6 Adoption.” This work is part of the Internet Governance Forum (IGF) inter-sessional efforts to create more tangible outcomes for the IGF by collecting and documenting best practices on a variety of topics. With the IGF 2015 taking place next week from 10-13 November, this project is drawing to a close and the final draft document is now published and open for review. The document is available at: http://review.intgovforum.org/?p=3987 You can use this same website to submit any comments. Comments will close on 14 November 2015, after which a final version of the document that incorporates any comments received will be released and made available for distribution. On day two of the IGF (11 November) from 09:00-10:30 local time (UTC-3) there will also be a session in which the main contributors will discuss the document and its main conclusions on what they believe are enabling factors that contribute to IPv6 adoption. Just like all sessions at the IGF, remote participation for this session will be available via http://www.intgovforum.org. Please follow the instructions that will be posted on that website. Finally I would like to thank all the RIPE community members that have contributed to this project, by responding to our survey or by making direct contributions on the mailing list or conference calls. Regards, Marco Hogewoning RIPE NCC - External Relations

1 0

New on RIPE Labs: IPv6 on the March
by Mirjam Kuehne 25 Sep '15

25 Sep '15

Dear colleagues, In this new RIPE Labs article Tony Smith from APNIC is looking at the increase in IPv6 deployment now ARIN has depleted their free pool of IPv4 addresses: https://labs.ripe.net/Members/mirjam/ipv6-on-the-march Kind regards, Mirjam Kuehne RIPE NCC

1 0

Re: [ipv6-wg] [ipv6-wg-chair] ipv6 deployment startup
by Jen Linkova 22 Sep '15

22 Sep '15

Hi Nadim, On Sat, Sep 12, 2015 at 9:59 PM, Nadim Houeiss <nadim(a)win-dsl.com> wrote: > looking to start the deployment of ipv6 only network for a new part in my > network , i need to have info about wish solution will be the best to be > used for NAT64 techniques for new ipv6 only end users will be able to reach > ipv4 different services and web servers on the web. As far as I know most network vendors (Cisco, Juniper etc) support NAT64 on their equipment. However don't forget that you'd need DNS64 as well, so I'd suggest to check if the DNS solution you are using currently supports DNS64. >From my experience the main issue is not choosing a vendor for NAT64 but dealing with broken applications: - applications which assume than "no IPv4 address" means "no Internet connectivity" and not even trying to establish any connections if the device does not receive Ipv4 address; - applications which are using IPv4 literals; - applications which ask for "A" DNS RR only, so DNS64 does not help etc. > looking forward for your reply, BTW I'm removing ipv-wg-chairs@ (as it is just an alias which is used to reach RIPE IPv6 Working group chairs) and adding RIPE IPv6 mailing list. -- SY, Jen Linkova aka Furry

2 1

[training] RIPE NCC Webinars - new dates
by Training Services 22 Sep '15

22 Sep '15

Dear colleagues, We are pleased to announce the launch of new dates for our Webinars. The RIPE NCC Webinars are live and take only one hour. You can interact with our trainers without leaving your desk. We focus on the topics and issues most important for LIRs. Register now at https://www.ripe.net/support/training/learn-online/webinars Participation is limited to 20 people, so don't hesitate if you want to take part! If you have questions, please email <training(a)ripe.net>. We look forward to seeing you online. Kind regards, RIPE NCC Training Services

1 0

[training] IP Address Space Course this November in Bucharest
by Training Services 08 Sep '15

08 Sep '15

Dear colleagues, We are happy to announce that a RIPE NCC training course will take place on the Sunday before the RIPE 71 Meeting in Bucharest this November. This course will focus on how to obtain and manage IP address space. The course is free of charge and is open to anyone interested. The course will cover the most frequently asked questions that the RIPE NCC receives about IP address space. ----------------- Course details ---------------- IPv6 Address Space Basics: How to Obtain and Manage Your IP Addresses Sunday, 15 November 2015, 10-16:00 JW Marriott Bucharest Grand Hotel ---------------- Course goals ---------------- By the end of this course, you will be able to: - Manage your IPv4 and IPv6 addresses according to current RIPE Policies - Understand how to obtain IPv4 addresses through transfers - Protect your address space from hijacking ---------------------------------------- Who will benefit from this course? ----------------------------------------- Anyone interested in the policies and procedures around address space in the RIPE NCC service region will find this course useful. No prior knowledge of the topic is necessary. ------------------------- Course outline: ------------------------- - Becoming a RIPE NCC member (why and how) - Obtaining IP addresses (IPv4 and IPv6) - IP address space transfers, mergers and acquisitions - IPv6 basics - Address space hijacking - Resource Certification (RPKI) ---------------------------- Additional information ---------------------------- - Free of charge - Coffee and lunch will be provided - Delivered by the RIPE NCC’s Training Services and Registration Services departments ----------------------------------------- Registration for RIPE NCC members ----------------------------------------- If you are a RIPE NCC member and interested in attending this course, please visit our website on the following page to register: <https://lirportal.ripe.net/training/register/courseCode/LIR20150032> ------------------------------------ Registration for non-members ------------------------------------- If you are not (yet) a member, please fill out the following information and send this to <training(a)ripe.net>: - Email: - Course name: - Full name : - Vegetarian: yes/no Be quick - we only have 45 seats available on a first come, first served basis! If there is enough interest, we will continue to offer courses on different topics of interest alongside future RIPE Meetings. Kind regards, RIPE NCC Training Services

1 0