- ipv6-wg - mailman.ripe.net

Fw: I-D ACTION:draft-ietf-ipngwg-uni-based-mcast-01.txt
by Thomas Trede 29 Jan '01

29 Jan '01

FYI. Regards, Thomas Trede ----- Original Message ----- From: <Internet-Drafts(a)ietf.org> To: <IETF-Announce: ;> Cc: <ipng(a)sunroof.eng.sun.com> Sent: Monday, January 29, 2001 12:44 PM Subject: I-D ACTION:draft-ietf-ipngwg-uni-based-mcast-01.txt > A New Internet-Draft is available from the on-line Internet-Drafts directories. > This draft is a work item of the IPNG Working Group of the IETF. > > Title : Unicast-Prefix-based IPv6 Multicast Addresses > Author(s) : B. Haberman, D. Thaler > Filename : draft-ietf-ipngwg-uni-based-mcast-01.txt > Pages : 5 > Date : 26-Jan-01 > > This specification defines an extension to the multicast addressing > architecture of the IP Version 6 protocol. The extension presented > in this document allows for unicast-prefix-based allocation of > multicast addresses. > > A URL for this Internet-Draft is: > http://www.ietf.org/internet-drafts/draft-ietf-ipngwg-uni-based-mcast-01.txt > > Internet-Drafts are also available by anonymous FTP. Login with the username > "anonymous" and a password of your e-mail address. After logging in, > type "cd internet-drafts" and then > "get draft-ietf-ipngwg-uni-based-mcast-01.txt". > > A list of Internet-Drafts directories can be found in > http://www.ietf.org/shadow.html > or ftp://ftp.ietf.org/ietf/1shadow-sites.txt > > > Internet-Drafts can also be obtained by e-mail. > > Send a message to: > mailserv(a)ietf.org. > In the body type: > "FILE /internet-drafts/draft-ietf-ipngwg-uni-based-mcast-01.txt". > > NOTE: The mail server at ietf.org can return the document in > MIME-encoded form by using the "mpack" utility. To use this > feature, insert the command "ENCODING mime" before the "FILE" > command. To decode the response(s), you will need "munpack" or > a MIME-compliant mail reader. Different MIME-compliant mail readers > exhibit different behavior, especially when dealing with > "multipart" MIME messages (i.e. documents which have been split > up into multiple messages), so check your local documentation on > how to manipulate these messages. > > > Below is the data which will enable a MIME compliant mail reader > implementation to automatically retrieve the ASCII version of the > Internet-Draft. >

1 0

Fw: I-D ACTION:draft-ietf-ipngwg-addr-arch-v3-03.txt
by Thomas Trede 29 Jan '01

29 Jan '01

FYI. Regards, Thomas Trede ----- Original Message ----- From: <Internet-Drafts(a)ietf.org> To: <IETF-Announce: ;> Cc: <ipng(a)sunroof.eng.sun.com> Sent: Friday, January 26, 2001 12:43 PM Subject: I-D ACTION:draft-ietf-ipngwg-addr-arch-v3-03.txt > A New Internet-Draft is available from the on-line Internet-Drafts directories. > This draft is a work item of the IPNG Working Group of the IETF. > > Title : IP Version 6 Addressing Architecture > Author(s) : B. Hinden, S. Deering > Filename : draft-ietf-ipngwg-addr-arch-v3-03.txt > Pages : 25 > Date : 25-Jan-01 > > This specification defines the addressing architecture of the IP > Version 6 protocol [IPV6]. The document includes the IPv6 addressing > model, text representations of IPv6 addresses, definition of IPv6 > unicast addresses, anycast addresses, and multicast addresses, and an > IPv6 node's required addresses. > > A URL for this Internet-Draft is: > http://www.ietf.org/internet-drafts/draft-ietf-ipngwg-addr-arch-v3-03.txt > > Internet-Drafts are also available by anonymous FTP. Login with the username > "anonymous" and a password of your e-mail address. After logging in, > type "cd internet-drafts" and then > "get draft-ietf-ipngwg-addr-arch-v3-03.txt". > > A list of Internet-Drafts directories can be found in > http://www.ietf.org/shadow.html > or ftp://ftp.ietf.org/ietf/1shadow-sites.txt > > > Internet-Drafts can also be obtained by e-mail. > > Send a message to: > mailserv(a)ietf.org. > In the body type: > "FILE /internet-drafts/draft-ietf-ipngwg-addr-arch-v3-03.txt". > > NOTE: The mail server at ietf.org can return the document in > MIME-encoded form by using the "mpack" utility. To use this > feature, insert the command "ENCODING mime" before the "FILE" > command. To decode the response(s), you will need "munpack" or > a MIME-compliant mail reader. Different MIME-compliant mail readers > exhibit different behavior, especially when dealing with > "multipart" MIME messages (i.e. documents which have been split > up into multiple messages), so check your local documentation on > how to manipulate these messages. > > > Below is the data which will enable a MIME compliant mail reader > implementation to automatically retrieve the ASCII version of the > Internet-Draft. >

1 0

[bmanning@vacation.karoshi.com: Closure?]
by David Kessens 26 Jan '01

26 Jan '01

FYI: ----- Forwarded message from bmanning(a)vacation.karoshi.com ----- X-Virus-Scanned: Fri, 26 Jan 2001 08:24:42 -0800 Nokia Silicon Valley Email Exploit Scanner From: bmanning(a)vacation.karoshi.com Subject: Closure? To: v6wg(a)arin.net Date: Fri, 26 Jan 2001 16:14:29 +0000 (UCT) X-Mailer: ELM [version 2.5 PL1] Precedence: bulk Good morning folks. This is to remind you that ARIN is still holding out on accepting the IAB/IESG recommendations for inital IPv6 delegation/allocation sizes. There was some lively discussion at the last mtg but the concerns generally came down to... "this makes me nervous and I don't understand it all to well." Yes, there are operational concerns but quite frankly, the number of people in the ARIN region that are able/willing to explore IPv6 seems to be either very small, not willing to share experiences, or are happy with the 6bone delegations. ARIN has pretty much removed the barriers to entry with the zero-cost delegation policy in place. Unless a viable counter proposal or modification to the existing IAB/IESG proposal that has been accepted by RIPE and APNIC, I'm going to recommend to the ARIN council that silence is consent and ARIN should adopt the IAB/IESG proposal for a /48 being the default delegation size, subject to review, based on operational experience. --bill ----- End forwarded message ----- David K. ---

1 0

Fw: W.G. Last Call on "A flexible method for an IPv6 addressing plan"
by Thomas Trede 17 Jan '01

17 Jan '01

FYI. Regards, Thomas Trede ----- Original Message ----- From: "Bob Hinden" <hinden(a)iprg.nokia.com> To: <ipng(a)sunroof.eng.sun.com> Sent: Tuesday, January 16, 2001 11:29 PM Subject: W.G. Last Call on "A flexible method for an IPv6 addressing plan" > This is a IPng working group last call for comments on advancing the > following document as an Informational RFC: > > Title : A flexible method for an IPv6 addressing plan > Author(s) : M. Blanchet > Filename : draft-ietf-ipngwg-ipaddressassign-01.txt > Pages : 13 > Date : 30-Nov-00 > > Please send substantive comments to the ipng mailing list, and minor > editorial comments to the author. This last call period will end two > week from today on January 30, 2001. > > Bob Hinden / Steve Deering > > -------------------------------------------------------------------- > IETF IPng Working Group Mailing List > IPng Home Page: http://playground.sun.com/ipng > FTP archive: ftp://playground.sun.com/pub/ipng > Direct all administrative requests to majordomo(a)sunroof.eng.sun.com > -------------------------------------------------------------------- >

1 0

Fw: Request to Advance "Transmission of IPv6 Packets over IEEE 1394 Networks"
by Thomas Trede 17 Jan '01

17 Jan '01

FYI. Regards, Thomas Trede ----- Original Message ----- From: "Bob Hinden" <hinden(a)iprg.nokia.com> To: <Erik.Nordmark(a)eng.sun.com>; <narten(a)raleigh.ibm.com> Cc: <scoya(a)ietf.org>; <ipng(a)sunroof.eng.sun.com> Sent: Tuesday, January 16, 2001 11:13 PM Subject: Request to Advance "Transmission of IPv6 Packets over IEEE 1394 Networks" > Erik, Thomas, > > The chairs of the IP Next Generation working group, on behalf of the > working group, request that the following document be published as an > Proposed Standard: > > Title : Transmission of IPv6 Packets over IEEE 1394 Networks > Author(s) : K. Fujisawa, A. Onoe > Filename : draft-ietf-ipngwg-1394-00.txt > Pages : 7 > Date : 14-Nov-00 > > A working group last call for this document was completed on December 12, > 2000. > > Bob Hinden / Steve Deering > IPng Working Group Co-Chairs > > -------------------------------------------------------------------- > IETF IPng Working Group Mailing List > IPng Home Page: http://playground.sun.com/ipng > FTP archive: ftp://playground.sun.com/pub/ipng > Direct all administrative requests to majordomo(a)sunroof.eng.sun.com > -------------------------------------------------------------------- >

1 0

agenda for IPv6 working group RIPE38
by David Kessens 17 Jan '01

17 Jan '01

Hi, Below follows the final version of the agenda for the ipv6 wg. Please let me know if you have any other topics that you want to have discussed, we can still add them if time allows, but they won't show up at the official printed version of the meeting agenda. Thanks, David K. --- Agenda for the IPv6 Working Group Meeting RIPE38, Amsterdam Wednesday January 24, 2001, 14:00-17:30 1st part 14:00-15:30 A. Administrative stuff - appointment of scribe - agenda bashing (David Kessens) B. Status of the 6bone (David Kessens) C. DNS and IPv6 (Roy Arends, Nominum) 2nd part 16:00-17:30 D. European Union projects regarding IPv6 (Gordon Lennox, European Union) E. Revised ietf bcp based on ripe/apnic input (Randy Bush) F. Are /35's enough as initial allocations ?!? (Bernard Tuy) G. Developments/initiatives regarding IPv6 in the RIPE region and beyond (input from the audience) Z. AOB ---

1 0

final version of the IPv6 joint policy meeting minutes
by David Kessens 12 Jan '01

12 Jan '01

Hi, Please see below for the final version of the minutes of the joint session of the ipv6 wg and lir wg regarding ipv6 allocation policies at RIPE37. The only changes made to the draft are typographical. I would like to thank Vesna for taking the minutes. Thanks, David K. --- IPv6 joint policy meeting RIPE ipv6-wg & lir-wg Wednesday, 13 September 2000 RIPE 37 Chair: David Kessens Agenda i Statement of current policy draft ii IAB/IESG recommendations iii Panel discussion iv AOB =i= Statement of current policy draft -- Joao Damas, RIPE NCC One year ago 3 Regional Internet Registries produced document that outlines allocation of IPv6 address space. * size of end user assignments * multihoming considerations * what is the meaning of 80% usage in ipv6? We need the clear picture of these issues to move forward. [chair: Bob Hinden tries to present the opinion of the IAB/IESG as closely as possible, but he is not the official spokesman of those bodies] = ii = IAB/IESG Recommendations on IPv6 Address Allocation - Bob Hinden URL: http://www/ripe/meetings/archive/ripe-37/presentations/ripe-ipv6-hinden/ We do not have real issue on service provider allocations size. Our recommendation is: /48 fixed boundary for all subscribers. This is consistent with responsible stewardship of the IPv6 Address space. Reasoning: - allocation policies influence the deployment; policies should make deployment easy, not slow - renumbering is (still) not painless or automatic Exceptions: - very large subscribers should get multiple /48:s, or /47 - transient nodes (roaming, dial-up) (/64) - explicitly no interest in subnetting Justifications for fixed boundary: - easy to change ISP:s (does not require restructuring of subnets) - straightforward renumbering - compatible with current multihoming proposals - allows easy growth of subscribers - reduces burden of ISP:s and RIR:s to judge customers' needs - no need for details of customers' networks - no need to judge rates of consumption - no scarcity of subscriber's space: no need for NAT - allows single reverse DNS zone (for all prefixes) Conservation: - does this waste IPv6 address space? No. - this distribution had better H ratio (RFC1715) then many others today - still, only one of the Format Prefixes (001) is going to be used; it leaves 85% of total IPv6 space for future usage and possible stricter policy Multihoming: IETF is still looking for input on this issue. = iii= Panel discussion: 1. Stephen Burley (UUNET) 2. Steve Deering (ipng) 3. Joao Damas (RIPE NCC) 4. Bob Hinden (ipng) 5. Randy Bush (ngtrans) 6. Juergen Rauschenbach (ipv6 forum) Q: What is criteria for ISP allocation? How much IPv6 address space does an ISP get? A: (Randy) This proposal is not changing other parts of policy. All will still get a /35. Normal slow start. Q: (Dave Pratt) Could you clarify what is meant by the 80% rule? A: (Bob) 80% of number of customers (ISP needs to allocate 80%, not the subscribers) Q: (Dave) I guess what I really mean is to do with ISP/LIR addressing hierarchy. It's difficult to build in hierarchy if aiming for 80% utilisation before more addresses will become available. Steve: H-ratio may be more appropriate rather than a percentage. A: I would suggest 20%. For example with 20% you can reserve addresses for 8 regions, and not worry if 6 of the 8 sites have small take up rates. A: (Steve) "you can start without hierarchy, and then add it later when the need arises". A: We could add hierarchy later, but maybe not really (same problems later as at start). We should be designing our networks correctly from the beginning. A: Discussion of possibility of H ratio's also being applied also to the LIR/ISP address range. Randy points out that with allocating /48s in a /35, the H ratio might be different, but the principle still holds, and there is a believe that there are enough addresses in IPv6 (also mentions in passing that the same believe existed in the early days of IPv4) Q: (Wilfried Woeber) Thank you for the clear document and clarification. Remaining issue: number of bits available for infrastructure. There should be a recommendation to start with the least significant bits. A: (Steve) We need an analysis regarding building an efficient hierarchy in the top 8 bits. If the community agrees on the /48 boundary, we may have to review the size of the initial allocation (/35 subTLA size). Joao explains why the /35 has been chosen. One gets 8192 NLA ranges, which can each by itself be structured and managed. This means it is actually more than if one gets a /19 in IPv4. Randy wonders why WW thinks one has a different problem in v6 than today in v4. The ISP he works for aggregates per pop, very strict and successful about it, but announce a /19 or shorter per pop. /35 feels as comfortable. Tries to understand if people don't feel comfortable with that and why. A: 13 bits (/35) is fine, it allows for aggregation per pop, the problem is the 80% usage rate. Randy: isn't the problem the percent, not matter how much it is? A: Problem is if the pops grow at different speed. A: Gert Doering, space net, Germany: We started with /19. By now, we have /16 and few /19:s, and they are not aggregated. We have resellers, and they have theirs. It fragments awfully. I am in favour of /56; or, I do not mind /48 if we can get bigger prefix (more bits) in the front. I do not need more space, but more possibility to build the hierarchy and aggregate. Joao: You have /29 contiguous block reserved to grow into. Gert: I don't see the need for slow start. There are so many /29s that the routing tables would explode before the /29s were exhausted. Bob suggests that might be solvable by rethinking the 80% usage rate (so that ISPs are not penalised for taking a long-term view from the start). Randy: He is in Frankfurt and Bon, and peers with Jurgen at both places, and announces same /35 at both places and Jurgen does not know to which one to send traffic. Chair: Want to refocus back on the recommendations of the draft. People seem to be OK with the /48. Let's move on. Need to come up with something to put in the multihoming section. For now, IPv4 method of multihoming should be used, as a short term recommendation. There is also the option to use multiple prefixes. The philosophy should be that addresses are cheap, so if someone wants to experiment with the multi address multihoming, let them and give them the addresses. Q: (Dave Pratt) Present PI space is authorised by RIPE and does NOT come from provider assigned space. I think this is a good rule (until better multihoming techniques are developed) that should be continued for IPv6. Alain Durand: Wants to emphasise that it's early in deployment and we need lots of feedback regarding whether multihoming techniques etc work. Be generous with /48s. Randy: From the proposal "if they need more address space, they get multiple /48:s". I would suggest /47. Steve: Looking to create a team to investigate how to measure usage. Maybe find a H ratio measure to apply instead of the 80% rule. Joao: the conservation is not the only issue here. WW: We want to keep the routing table small. (...) Randy: Small number of providers having TLA does not look good from the market point of view and it would create the small club who owns the Internet. A: The requirement is not only to aggregate well (shrinks the table), but also to find neutral mechanism of allocation; how to get into that club. Chair: Do you have enough info on /48 proposal? (yes) Chair: OK recommendation of this group is that /48 assignments should go ahead. This will be taken to ARIN and APNIC.

1 0

RIPE 37 ipv6 wg final minutes
by David Kessens 12 Jan '01

12 Jan '01

Hi, Please see below for the final version of the minutes of the ipv6 wg session from the last RIPE meeting. The only changes made to the draft are typographical. I would like to thank Vesna for taking the minutes. Thanks, David K. --- IPv6 Working Group Chair: David Kessens RIPE 37 Amsterdam, 13 September 2000 Agenda: A Administrative stuff - appointment of scribe (Vesna Manojlovic) - list of attendees - agenda bashing B Status of 6bone (David Kessens) http://www.kessens.com/~david/presentations/ C RPSL & IPv6 (Joachim Schmitz, routing-wg chair) There is a need to include ipv6 in the routing registries on the functional level. In the routing-wg , ipv6 is being looked into. There is still a question of whether we need separate ipv6 Routing Registry. There are specific issues to be dealt with. There is RPSL, but it is developed for IPv4. It is suited to describe routing policies and protocols. We designed a proposal for RIPE NCC activity plan to take care of RR for IPv6. Central and structured approach with RPSL are some of the requirements. Proposal includes development of RPSL definitions and needs to include them into RIPE database. I would like to invite you to take part in it. Q: Was the document sent to the list? A: Not, so far. I do not see any reason not to do it. D IP Transition Strategies (Alain Durand, co-chair of the IETF NGtrans WG) http://www.ripe.net/ripe/meetings/archive/ripe-37/presentations/RIPE37/inde… Toolbox for transition mechanisms is developed: - networks 1. ipv6 as layer3 protocol 2. ipv6 over ipv4 3. tunnels (automatic, 60ver4, configured, tunnel broker, 6to4) - stacks hybrid, not dual - applications - some interoperability is needed - tools (translators, DSTM) E News from IPv6 Forum (Juergen Rauschenbach) http://www.ripe.net/ripe/meetings/archive/ripe-37/presentations/jr-IPv6ripe… F Addressing plan of the real world F1: IPv6 address plan at DFN (Juergen Rauschenbach) http://www.ripe.net/ripe/meetings/archive/ripe-37/presentations/dfn-v6-adr/… Q: As a private person, can I participate in the dial-up part of it? A: We have contractual partners, but for the testing purposes we may discus it - to allow you to take part. Q: Native or tunnels? A: Initially - tunnels, just for universities to try out. Q: What kind of routing equipment? A: cisco, and [...] but we want to go for cisco-based solutions. F2: Deploying a IPv6 Backbone (Bernard Tuy, Renater) Q: Why did you use /126 for tunnel? A: Cisco. Q: Question to RIPE NCC: are you going to implement the ipv6 root name server? Wilfried Woeber: group of people is working on making one of the name servers ipv6 "compatible".. There are still problems with resolver libraries, clients.. lost capability to use ipv6 transport for DNS. There is no resolver in bind9. We have subTLAs. We want them in the real world. We do need routing registry. G IPv6 connectivity in the terminal room (Monica Cortes, RIPE NCC) If you have IPv6 configured on your laptop, and are connected to LAN here, you can use IPv6. In September 99 we had tunnel to 6bone. (surfnet) January: Intel, bsdi, tunnel - straightforward. applications not smooth. May: In Budapest, moving the box - Solaris 8 , intel; tunnel to ncc, from there to surfnet. there was a tutorial there, showing the setup of tunnel. there was an ipv6 only box, able to connect to the internet through that tunnel. Next time we will have a nameserver. Now we have a web server... H v6 native exchange points - INXS (Muenich) - AIX from october 2000 - LINX plans to provide ipv6 exchange in 2000 I European developments, initiatives... (input from the audience) no input this time J Future plans for the working group (input from the audience) Chair: 6over4, 6to4... a lecture Would people appreciate that? Little tutorial? Bernard Tuy - very good idea. Chair: OK, one volunteer?!? People who did IPv6 tutorial last time want to do it next time, too & v6 demo setup in terminal room Bernard: 50-60 people were attending, and nobody at demo. Disappointing. Chair: we need more publicity, to let people know what is going on. Any more topics? Wilfried Woeber: v6 DNS. Z AOB nothing

1 0

draft agenda (v1) for IPv6 working group RIPE38
by David Kessens 12 Jan '01

12 Jan '01

Hi, Below follows the draft agenda (v1) for the ipv6 wg. Please let me know if you have any other topics that you want to have discussed or if you want to volunteer for a presentation. Thanks, David K. --- Agenda for the IPv6 Working Group Meeting RIPE38, Amsterdam Wednesday January 24, 2001, 14:00-17:30 1st part 14:00-15:30 A. Administrative stuff - appointment of scribe - agenda bashing (David Kessens) B. Status of the 6bone (David Kessens) C. DNS and IPv6 (Jim Reid, Nominum) 2nd part 16:00-17:30 D. European Union projects regarding IPv6 (Gordon Lennox, Joao da Silva, European Union) E. Are /35's enough as initial allocations ?!? (Bernard Tuy) F. Developments/initiatives regarding IPv6 in the RIPE region and beyond (input from the audience) Z. AOB ---

1 0

RIPE 37 ipv6 wg minutes
by David Kessens 23 Dec '00

23 Dec '00

Hi, Please see below for the minutes of the ipv6 wg session from the last RIPE meeting. The minutes will be declared final by Januari 5 if I don't receive any comments other than typographical errors and other minor corrections. I would like to thank Vesna for taking the minutes. Thanks, David K. --- IPv6 Working Group Chair: David Kessens RIPE 37 Amsterdam, 13 September 2000 Agenda: A Administrative stuff - appointment of scribe Vesna Manojlovic - list of attendees - agenda bashing B Status of 6bone (David Kessens, http://www.kessens.com/~david/presentations/) C RPSL & IPv6 (Joachim Schmitz, routing-wg chair) There is a need to include ipv6 in the routing registries on the functional level. In the routing-wg , ipv6 is being looked into. There is still a question of whether we need separate ipv6 Routing Registry. There are specific issues to be dealt with. There is RPSL, but it is developed for IPv4. It is suited to describe routing policies and protocols. We designed a proposal for RIPE NCC activity plan to take care of RR for IPv6. Central and structured approach with RPSL are some of the requirements. Proposal includes development of RPSL definitions and needs to include them into RIPE database. I would like to invite you to take part in it. Q: Was the document sent to the list? A: Not, so far. I do not see any reason not to do it. D IP Transition Strategies Presented by: Alain Durand Co-chair of the IETF NGtrans WG http://www.ripe.net/ripe/meetings/archive/ripe-37/presentations/RIPE37/ Toolbox for transition mechanisms is developed: - networks 1. ipv6 as layer3 protocol 2. ipv6 over ipv4 3. tunnels (automatic, 60ver4, configured, tunnel broker, 6to4) - stacks hybrid, not dual - applications - some interoperability is needed - tools (translators, DSTM) E - News from IPv6 Forum (Juergen Rauschenbach) [presentation] F - Addressing plan of the real world F1: (Juergen Rauschenbach) [presentation] Q: As a private person, can I participate in the dial-up part of it? A: We have contractual partners, but for the testing purposes we may discus it - to allow you to take part. Q: Native or tunnels? A: Initially - tunnels, just for universities to try out. Q: What kind of routing equipment? A: cisco, and [...] but we want to go for cisco-based solutions. F2: Deploying a IPv6 Backbone Bernard Tuy, Renater [presentation] Q: Why did you use /126 for tunnel? A: Cisco. Q: Question to RIPE NCC: are you going to implement the ipv6 root name server? WW: group of people is working on making one of the name servers ipv6 "compatible".. There are still problems with resolver libraries, clients.. (frustrated comment) lost capability to use ipv6 transport for DNS. There is no resolver in bind9. We have subTLA:s. We want them in the real world. We do need routing registry. G - IPv6 connectivity in the terminal room (Monica Cortes, RIPE NCC) If you have IPv6 configured on your laptop, and are connected to LAN here, you can use IPv6. In September 99 we had tunnel to 6bone. (surfnet) January: Intel, bsdi, tunnel - straightforward. applications not smooth. May: In Budapest, moving the box - Solaris 8 , intel; tunnel to ncc, from there to surfnet. there was a tutorial there, showing the setup of tunnel. there was an ipv6 only box, able to connect to the internet through that tunnel. Next time we will nave nameserver. Now we have web server... H - v6 native exchange points - INXS (Muenich) - AIX from october 2000 - LINX plans to provide ipv6 exchange in 2000 - (Bernard) - ask him later! I - European developments, initiatives... (input from the audience) J - Future plans for the working group (input from the audience) no input this time 1. Chair: 6over4, 6to4... a lecture Would people appreciate that? Little tutorial? Bernard - very good idea. Chair: OK, one volunteer?!? 2. People who did IPv6 tutorial last time want to do it next time, too & v6 demo setup in terminal room Bernard: 50-60 people were attending, and nobody at demo. Disappointing. Chair: we need more publicity, to let people know what is going on. Any more topics? WW: v6 DNS. Z - AOB nothing

1 0