May 2013 - ipv6-wg - mailman.ripe.net

RIPE 554 Errata Page
by Wilhelm Boeddinghaus 17 Jan '14

17 Jan '14

Dear colleagues, as shortly discussed in Dublin I suggest to set up an errata page for the RIPE 554 document. Errors have been found, and we cannot change anything in the document without getting a new RIPE document number. But having to many different versions of the document confuses our audience. A errata page would make it possible to document minor but important changes of the content of the document. If the group says "yes" we could ask RIPE to help with a page like this. It should be easily reachable from the download page of RIPE554. Kind regards, Wilhelm Boeddinghaus

15 33

[training] RIPE NCC Webinars - new dates
by Training Mailbox 29 Aug '13

29 Aug '13

[Apologies for duplicate e-mails] Dear colleagues, We are pleased to announce the launch of new dates for our Webinars for LIRs. The RIPE NCC Webinars are live, one hour online training courses that allow participants to interact with our trainers without leaving their desks. We focus on the topics and issues most important for LIRs. Register now at https://www.ripe.net/lir-services/training/e-learning/webinars Participation is limited to 20 people, so don't hesitate if you want to take part! If you have questions, please email<e-learning(a)ripe.net>. We look forward to seeing you online. Kind regards, RIPE NCC Training Services

2 2

Re: [ipv6-wg] RIPE 554 Errata Page
by Merike Kaeo 28 May '13

28 May '13

OK, just got caught up on thread... On Tue 28/05/13 5:13 AM , Tim Chown <tjc(a)ecs.soton.ac.uk> wrote: > On 28 May 2013, at 13:00, "Jan Zorz @ go6.si" wrote: > > > On 5/28/13 1:12 PM, MarcoH wrote: > >> As was just discussing with Jan here in St Petersburg, I'm getting a > bit confused about where we are heading. > >> > >> Do we still want to compile a list of errors and find a way to "attach" > this to the 554 document as an errata? > >> > >> Or are we now gaining momentum to do a full revision and release a new > document superseding 554? Which of course should incorporate all the fixes > as well (and probably introduce some new mistakes) > >> > > This is a complex question now ;) > > > > I suggest that I make two lists - one with mistakes and errata material > in another one with significant changes suggestions. > > > > For a quick fix we could process "errata" small changes and when the > other list with bigger changes grows enough that we collectively decide we > need a new version of the document - we go and change it. > > > > Would that work? > > That sounds good. Works for me too. The one known issue for RIPE 554 is (and has been for a long time as Sander pointed out), the fact that we should have had RFC6105 instead of RFC 4862 since the intent was to make RA filtering mandatory. Jan has approached me a few times to see about helping edit a newer version and I am OK with that as long as there are enough changes to warrant a completely new document. We don't want to turn out a new RIPE doc every time one new v6 related RFC is published but certainly we should keep track of enhancements and modifications on best practices as deployments continue and then turn out a new document (and obsolete previous one(s)). - merike

2 1

Reminder:Cosmetic Surgery Project, new revised RIPE Policy, document for IPv6 database objects
by Emilio Madaio 28 May '13

28 May '13

Dear colleagues, As part of the Cosmetic Surgery Project, the RIPE NCC is moving forward with a review of the policy document ripe-513, "Value of the "status:" and "assignment-size:" attributes in INET6NUM objects for sub-assigned PA space". At the request of the proposers of the original policy proposal that produced ripe-513, we’re sending a reminder about the document review and inviting the IPv6 Working Group Mailing List and Database Working Group Mailing List subscribers to participate in the review process. A draft of the policy document is now online and ready for community review at: https://www.ripe.net/ripe/readability/improving-the-readability-of-ripe-doc… We encourage you to read the edited draft of ripe-513 and send any comments to <address-policy-wg at ripe.net> by 10 June 2013. Kind Regards, Emilio Madaio Policy Development Officer RIPE NCC

2 1

[training] RIPE NCC Training Courses July-September 2013
by Training Team 27 May '13

27 May '13

Dear Colleagues, Our training team travels the RIPE NCC service region to deliver training courses to our members without any additional cost. Over the next few months, we'll be in Rome, Chisinau, Munich, Moscow, Prague, London, Ljubljana, Yerevan, Malmö, Istanbul, Amsterdam. Visit the following page to register and to check which training courses we are giving in your area: https://lirportal.ripe.net/training/courses The RIPE NCC delivers the following training courses: - LIR Training Course - Database Training Course (new) - IPv6 for LIRs Training Course - Routing Security Training Course For more information visit: http://www.ripe.net/lir-services/training/courses With kind regards, Rumy Spratley-Kanis Training Services Manager

1 0

MERIT Darknet Experiment, Guidance Sought in Routing WG
by Daniel Karrenberg 15 May '13

15 May '13

Some of you may remember the short discussion here last November about the MERIT Darknet experiment and the subsequent change in our permission to MERIT. This RIPE meeting we have heard a presentation from MERIT/US-DHS about first results: https://ripe66.ripe.net/presentations/121-v6darknet-ripe2013.pdf Given this, the RIPE NCC is seeking guidance on what our permission to MERIT should be in the future. Here are a couple of slides which we will present in the routing-wg: https://ripe66.ripe.net/presentations/259-20130515-v6-darknet.key.pdf Any reactions are welcome. I suggest to have any discussion over on routing-wg(a)ripe.net. Daniel

1 0

New on RIPE Labs: Implementing Fifth Start IPv6 RIPEness
by Mirjam Kuehne 13 May '13

13 May '13

Dear colleagues, In this new article on RIPE Labs we present the first results of a fifth star for IPv6 RIPEness. This is a way to measure real IPv6 deployment in the RIPE NCC service region: https://labs.ripe.net/Members/emileaben/ipv6-ripeness-implementing-the-5th-… We would like to receive your feedback on a number of open question raised in the article. We also hope to see many of you at the IPv6 WG meeting in Dublin later this week where these results will be presented. Kind regards, Mirjam Kuehne RIPE NCC

1 0

RIPE 66 Draft Agenda version 2
by Marco Hogewoning 02 May '13

02 May '13

Dear Colleagues, Attached a copy of the latest draft agenda. As you may notice, this time round we opted for a couple of longer talks, which makes the speakers list a bit shorter than normal. Should there be any other topic you wish to discuss or you think we missed some important developments, please let us know. Your IPv6 WG Chairs, Marco, David and Shane Session 1 – Wednesday, 15 May 13:00 – 15:30 (Main Room) A) Welcome and Administrative Business B) “Implementing Full IPv6 Support: More than Binding to an AF_INET6 Socket” Bert Hubert, PowerDNS/Netherlabs C) "non-working clients" - TBC Andrew Yourtchenko, Cisco D) “The latest developments in DHCPv6″ Tomek Mrugalski, Internet Software Consortium Session 2 – Thursday, 16 May 09:00 – 10:30 (Side Room) A) "Measuring Effectiveness of Happy Eyeballs" - TBC B) "IPv6 RIPEness Fifth Star" Vesna Manojlovic, RIPE NCC C) IPv6 Measurements Panel Organisers: - Marco Hogewoning, RIPE NCC - Meredith Whittaker, Google/M-Lab Panellist: - Geoff Huston, APNIC - Mark Townsley, Cisco - Steve Nash, Arbor Networks (TBC) - Heidi Kivekäs, FICORA (TBC) X) Close

1 0

[training] New RIPE NCC IPv6 E-Learning tutorials
by Sandra Bras 02 May '13

02 May '13

[Apologies for duplicates] Dear colleagues, We are pleased to announce the launch of four new videos on IPv6 Transition Mechanisms as part of our online training. The topics include: - 6in4 - 6RD - NAT64 - DS-Lite You can watch them online at: https://www.ripe.net/lir-services/training/e-learning/ipv6/transition-mecha… Stay tuned! We plan to announce more exciting E-Learning news in the coming months. RIPE NCC E-Learning tutorials are provided as a free service available to everyone. If you have any questions, please feel free to contact us at: e-learning(a)ripe.net. Happy learning, Sandra Brás Trainer / E-Learning Project Manager

2 1