May 2002 - ipv6-wg - mailman.ripe.net

Re: Getting addresses
by Peter B . Juul 10 May '02

10 May '02

On Fri, May 10, 2002 at 05:33:22PM +0200, Wilfried Woeber, UniVie/ACOnet wrote: > may I suggest that we discuss your situation off-line? I definitely > don't want to stop any discussion on a list, but I don't see a point in > re-opening the discussion *right now* and *right here* for your > situation. My apologies for raising the noise level. I just wanted to hear if something new had been agreed upon, and it seems it have. It seems we should be able to sort things out now. > Unless my background is wrong (and you are actually trying to achieve > something else) I'm pretty sure that we can find a *proper* way now with > this new policy to supply you with IPv6 addresses (for 6NET). Absolutely. I just wanted to know if the new policy had been approved. Peter B. Juul, Uniï¿½C (PBJ255-RIPE)

1 0

RE: Getting addresses
by Michel Py 10 May '02

10 May '02

> Peter B. Juul wrote > but the active guidelines - specifically the demand for three peers > in the default-free zone, a demand that can't be met for political > and economical reasons - made this impossible. There is no such thing as a default-free zone for IPv6 anyway. Not in the v4 sense, and there is no definition for IPv6 DFZ. I presented this at the 6bone meeting in Minneapolis, might want to have a look at it. http://arneill-py.sacramento.ca.us/ipv6mh/ietf53.ppt > Francis Dupont wrote > => sub-TLAs are for ISPs, not for NRENs. The solution for a NREN > is either to disguise itself as an ISP, Which is really easy to do. When you look at the requirements, you can even meet the 200 /48s assigned to end-users quickly, just get all your local linux chapter buddies and some of your co-workers and students and voila, you have 200 users and now you are an ISP. As far as I know, there is no requirement for the links to be native v6, so tunnels would work fine. Gee, you don't have to be a NREN, you can even get that for your home. </sarcasm> > or to join the 6bone. Or both. There are some experiments that you could run over 6bone address space and don't want your "production" v6 network to be affected. Michel.

2 1

Re: Getting addresses
by Wilfried Woeber, UniVie/ACOnet 10 May '02

10 May '02

Dear Philip, thanks for circulating the URL! >The document containing the revised allocation and assignment policy: > > IPv6 Address Allocation and Assignment Global Policy > ftp://ftp.cs.duke.edu/pub/narten/ietf/global-ipv6-assign-2002-04-25.txt > >was discussed (in the LIR WG meeting) and consensus was achieved within the >RIPE community (joining consensus achieved in APNIC's and ARIN's >communities).... > >I suspect the doc will answer your question. > >philip >-- Dear Peter, may I suggest that we discuss your situation off-line? I definitely don't want to stop any discussion on a list, but I don't see a point in re-opening the discussion *right now* and *right here* for your situation. Unless my background is wrong (and you are actually trying to achieve something else) I'm pretty sure that we can find a *proper* way now with this new policy to supply you with IPv6 addresses (for 6NET). I would expect that either the Danish NREN and/or NORDUnet would be involved in one way or another. Regards, Wilfried.

1 0

RE: Regarding IPv6 prefix filtering
by Michel Py 05 May '02

05 May '02

Sorry about the bad English; you should have read: I short: PA is not what you need in the long run. If you don't want to end up in the PI swamp, don't make my job impossible if you want me to deliver the local /48 allocation you need. Michel.

1 0

RE: Regarding IPv6 prefix filtering
by Michel Py 05 May '02

05 May '02

>>> neither are "use a /48 from each of the upstreams" >> Why not? All of the upstreams is probably overkill, but from three or >> four big ones? > For optimum routing, and neutrality, at least in the case of the > RIPE NCC (and maybe some of the IXes service networks), you want > all upstreams (90) to reach their network directly, not going over > other peers. So you either take 90 /48s, or take one, and announce > that to all the peers/ upstreams (which is mostly the same in these > situations). Note that we are not talking about 90 /48s here, but 90 /64s, one from each of the peers. So, you connect your DNS server with an 802.1Q compliant NIC, two-thirds of these 90 VLANS already exist in the exchange's L2 fabric. Where is your problem? > I can very well imagine a scenario where ISPs are willing to > accept more-specifics *in their own (RIR) region*, and filtering > out those from other regions. Except for global players (that > can't say "this is my region" because they're present everywhere) > this would result in near-perfect connectivity to all networks, > while not being forced to take all the crap. Gert, What you describe is a geographically based prefix filtering system. This does _not_ belong into PA space. It belongs to geographically aggregatable space, which like its name implies will be not only filtered based on geographical criteria but also aggregated. We have a project in ipv6mh called "geo for now" which is similar to what you describe and that we think is the short-term answer you and others are seeking. Aggregation of PA can _not_ be broke. Please allocate the resources of your brain into getting the solution out instead of futile attempts. Michel.

2 1

Re: Regarding IPv6 prefix filtering
by Gert Doering 04 May '02

04 May '02

Hi, On Sat, May 04, 2002 at 10:25:55PM +0200, Sebastian Willing wrote: > Gert Doering wrote: > > (For the IXes, the *peering mesh* LAN is. The services network is not) > > ...and I don't see any reason for the peering LAN to be announced to others > than the IX-member-ASs. So, a /48 (or less) should be no problem. You may > even choose to not announce it within your structure. That's why we have a special policy for neutral-but-unrouteable prefixes (at least "possibly unrouteable") for IXes - for the peering mesh *only*. Gert Doering -- NetMaster -- Total number of prefixes smaller than registry allocations: 45077 (47584) SpaceNet AG Mail: netmaster(a)Space.Net Joseph-Dollinger-Bogen 14 Tel : +49-89-32356-0 80807 Muenchen Fax : +49-89-32356-299

1 0

RE: Regarding IPv6 prefix filtering
by Michel Py 04 May '02

04 May '02

Gert, > Gert Doering wrote: > Maybe I should be more precise on that. We're talking for > example about the address space to be used by the RIPE NCCs DNS > servers, doing reverse delegation for 6.0.1.0.0.2.ip6.{int,arpa}. > The NCC is multi-homed to about 90 ISPs today, many of which are > now starting to offer IPv6 services, natively delivered over the > AMS-IX exchange. > People want to see this service so that they can do v6-only > stuff, without the need to go to ns.ripe.net's IPv4 address. I understand this. > 6to4 is not an answer in this scenario, For the specific example of DNS roots, it is definitely not the best. Your original post did say anything about that. > neither are "use a /48 from each of the upstreams" Why not? All of the upstreams is probably overkill, but from three or four big ones? What you are looking at here, in terms of redundancy, compared to the prefix leak, is _some_ resolution failures when one of these "five nines" upstreams is down, opposed to a total failure if the one ISP you choose to leak the prefix has a major routing issue. Large operators will lose a pop from time to time, I can remember some tier-1 losing the entire North American frame relay for 24 hours, can happen to anyone. By using one PA address, you still are vulnerable to some forms of single ISP failure. > "get a globally unique prefix" (because that network is *not* > special enough to warrant an exception from "end sites do not > get an allocation") Agree. > Which leaves "leak more-specific", which would solve that > problem quite well. As of today, I think that "use a /48 from each of the upstreams" is a less risky option than "leak more-specific". This is debatable; I predict that you will have a hard time convincing people that "leak more-specific" brings enough short-term gains (especially given the fact that it still is having most of your eggs in the same basket) to justify the precedent of breaking the aggregation. At the risk of giving people bad ideas, let me tell you what will hear a lot should that happen: "You guys did leak your prefix in the DFZ to multihome your DNS. Your DNS is no more important than my business, and since you have shown the example I will cut a deal with my upstreams so they leak my prefix in the DFZ, too; if you're not happy about it you, though. You should not have started it in the first place". For the same reasons that apply to 'that network is *not* special enough to warrant an exception from "end sites do not get an allocation"', that network is not special enough to warrant an exception to filtering policies that will lead to a huge mess. > there are stronger arguments for "PA leaking" vs. "using PI and keep > that forever". I might be mistaken, but I do not think that either one is an open option at this time. Still the basic issue is unchanged - some people do not want to rely > on just one upstream, and for others (like the NCC) it doesn't make > sense to confine their service to just one upstream. > So what exactly are you talking about? I am talking about locally unique, provider-independent, aggregatable addresses. > Any implementations out there that I could look at? Go here http://arneill-py.sacramento.ca.us/ipv6mh/ and look at MHAP. There is no running code per say but simulations are under way. I suggest you refrain from posting "it does not work" before you read and understand it. > I'm doing my best to help developing policies and techniques that > follow the pragmatic approach of "make it work today and avoid > doing irrevocable damage in the progress". This is very close to our line of thinking. However, breaking aggregation of PA space _does_ irrevocable damage in the sense that people will begin to build multihomed setups based on it. The argument "We can do it, but not end-sites" will not hold. Save for ISPs that receive a global allocation, any kind of "multihomed" setup you create today, DNS related or not, will need to be scrapped when IPv6 multihoming is deployed [if you want to undo the damage]. >From a business standpoint, if I can get my business multihomed by cutting a deal with secondary ISPs to announce my primary's PA block, and if my business makes it to revenue-generating production, the only thing I want to do is continue paying my secondary ISPs to continue leaking my prefix in the DFZ. And they will do, because they want to keep me as a customer. Allowing people to leak specific prefixes in the DFZ is pretty darn close to giving them their own. ISPs will not filter because they don't want to risk losing revenue, end-sites will not allocate resources to clean what's not broken on their end (the DFZ's routing table). Exactly the same mess situation we have with v4. Once a /48 leaks into the DFZ and is used for revenue-generating production, would you explain us what are you going to do to take it away? Michel.

2 1

Re: Regarding IPv6 prefix filtering
by Gert Doering 04 May '02

04 May '02

Hi, On Sat, May 04, 2002 at 08:55:17PM +0200, Sebastian Willing wrote: > Gert Doering wrote: > > > Why couldn't the RIPE (or better, IANA) claim a /32 or something like this > > > to be used only for PI /48 networks? This way, we could filter out everything > > > more-specific then /48 in this network and everything more-specific then /?? > > > everywhere else. > > > > What would be the benefit of this? > > > > The drawbacks are: > > > > - it creates instant legacy objects (those will be around forever - there > > is no way they can disappear) > > > > - if someone filters out /48s, those networks are instantly dead. When > > using /48s out of aggregateable space, if someone filters them, the > > networks can still be reached via the aggregate block. > > You (as an upstream) could announce the whole claimed block as a kind of > gateway-of-last-resort - route to your downstreams. This is why people use /48s out of PA blocks. Because it's automatic, and the block-route is already pointing into the right direction and does not have to be generate by every single "upstream" ISP out there. > > The only "advantage" of PI is that it's "independent" and you can carry > > it around when changing ISPs. But everbody else has to pay for that. > > > > PI is *bad*. > > Okay, change it's name or reserve it for organasations like RIPE, DeNic, Switch, > Nic.at, DeCix and so on. No. None of them are more special than everybody else. (For the IXes, the *peering mesh* LAN is. The services network is not) Gert Doering -- NetMaster -- Total number of prefixes smaller than registry allocations: 45077 (47584) SpaceNet AG Mail: netmaster(a)Space.Net Joseph-Dollinger-Bogen 14 Tel : +49-89-32356-0 80807 Muenchen Fax : +49-89-32356-299

1 0

RE: Regarding IPv6 prefix filtering
by Michel Py 04 May '02

04 May '02

> Gert Doering wrote: > We're trying to get a proper DNS chain going - it's not too useful > to build this on top of v4, if the goal is to do away with v4 > dependency for fairly unimportant things like "the DNS chain". You are putting the car before the horse, IMHO. You want a solution for *now*. Besides multihomed 6to4 (that will likely still be available in 15 years, which leaves you time to redesign), what you have *now* is your DNS servers having multiple PA IPv6 addresses without the need to leak /48s in the DFZ and without filtering problems. It appears to me that if you want to design a multihomed DNS chain, there could be some value in knowing what multihoming is actually going to be; and it's not going to be leaking PA prefixes in the DFZ in any scenario considered today. > and people in the RIPE region are starting to > do serious work on this. I'm happy they are. As of myself, I began a long time ago. And, BTW, I'm from the RIPE region. The kind of partial redundancy you would get by leaking prefixes has been solved a year ago. What we are currently discussing are specific cases of catastrophic multiple-ISP failures. Whining about the lack of a v6 multihoming solution is not going to bring it to you faster. I am not the one that stalled the process. Have you considered participating in its development? Michel.

2 1

RE: Regarding IPv6 prefix filtering
by Michel Py 03 May '02

03 May '02

> Among those that do not filter you, you have ideal and > perfect connectivity. And give them a real good opportunity to squeeze all the money they want out of you the day you _really_ need them not to filter. > If I've overlooked a flaw, and there is a better way *today* that > does not instantly create non-removeable legacy problems, please > point this out 6to4 addresses off a multihomed IPv4 address. The 6to4 address is portable, the v4 connectivity today is typically better than native v6 is, and if you are building a v6 only mission-critical system, you are building a skyscraper on sand. You don't like tunnels? I have news for you: *today*, v6 is _mostly_ tunnels. Michel.

2 1