Based on the outcome of some discussion during the presentation of the dom-prefix at the last RIPE database workgroup meeting I have added/changed the following. 1: Prefixes or NSAPs are to be formatted with dots. The first dot defines the AFI and comes after the first two digits. Every next four digits should be seperated by dots. 2: The cost associated with default routing should be interpreted such that the prefered path has the lowest cost. - Henk Steenman ----------------------------- Cut here ------------------------------------- CLNS routing-domain object for the RIPE database Version 1.3 Feb 1994 Henk Steenman Henk_Steenman@sara.nl +31 20 5928038 CLNS routing-domain object Page 2 Introduction. ____________ In the RARE lower layer technology work group for CLNS it was recognised that in order to coordinate routing between CLNS routing domains a central registry for such domains was necessary. At a meeting of the work group at the 27 IETF in Amsterdam it was decided to write a registry specification. At this meeting the RIPE NCC offered to extend their database for IP domains/networks with CLNS related objects if a sound proposal came forward. Below a description of a database object for CLNS routing domains is defined. The object can be used to describe some general information of a CLNS routing domain such as NSAP prefix, name, description and responsible persons. It can also be used to describe routing policies in a manner comparable to that for IP domains ( AS's ) as defined in the paper RIPE 81 [1]. The attributes describing routing policy are intended to be set-up such that routing tables for static inter-domain routing can be derived from them or excisting routing can be checked against the described policy. It is desired that tools are made to serve these tasks. It is understood that the object as described below is subject to change when CLNS routing developes. An example of this could be the future availability of IDRP for dynamic inter-domain routing. In an appendix, some generally used combinations of the Authority and Format Identifier (AFI) and the Initial Domain Identifier (IDI) are shown. The RIPE database expects NSAPs or prefixes to be formatted with dots, seperating the first two and then every next four digits. CLNS routing-domain object Page 3 Object Description _________________ dom-prefix: Defines an unique routing domain, characterised by a NSAP prefix , within a certain prefix hierarchy. Example: dom-prefix: 39.528f.1100 dom-name: String representing the routing domain. Format: Text string. Example: dom-name: SURFnet-CLNS descr: Description of the organisation and place of its location Format is equal to the descr attribute as defined for IP autonomous systems in [1]. bis: Format : < bis NET > < dom-prefix > NET of boundary intermediate system to between two domains Example: SURFnet BIS for EuropaNet bis: 39.528f.1100.1000.2000.0000.0001.0000.0c04.29b4.00 39.528f.1103 CLNS routing-domain object Page 4 dom-in: Description of accepted routing domain prefixes, from other domain BIS. Analogue to "as-in" in [1]. Format:< dom-prefix > < cost> <routing policy expression > For every BIS you peer with, there should be such an entry <dom-prefix> is the routing domain prefix where the BIS you peer with belongs to. <cost> is a relative cost to discriminate between different routes to the same domain. The lowest cost gives the most preferred route. <routing policy expression > can be expressed in the following way's 1: list of "dom-prefixes" Example: dom-in: 39.528f.1103 100 39.124F 47.0005 2: KEYWORD Only one keyword for the moment ANY - accept everything you get announced. 3: A logical expression of 1 and/or 2. The following operators should be defined AND OR NOT Parenthesis are used to group rules. Example: dom-in: 39.528f.1103 ANY AND NOT 39.756f Accept all announcements from EMPB BIS except for the Switzerland routing domain. CLNS routing-domain object Page 5 dom-out: Routing domain prefixes announced to other BIS'. Analogue to the "as-out' tag in [1]. Format : < dom-prefix > <routing policy expression > <dom-prefix> is the routing domain prefix where the BIS you peer with belongs to. <routing policy expression > As defined with the dom-in tag. Example: dom-out: 39.528f.1103 39.528f.1100 AND NOT 39.528f.1100.0009.10 Advertise to Europanet the SURFnet-CLNS routing domain but not the PTT-Research routing domain. default: Indication how default routing is done default: < dom-prefix> <cost> <dom-prefix> again is the prefix of the domain where the BIS peer is in. <cost> indicates which default path is preferred. The lower cost gives the preffered path Example: default: 39.528f.1103 10 Default everything is routed to 39.528f.1103 CLNS routing-domain object Page 6 admin-c: Administrative contact. Format equal to admin-c in [1]. tech-c: Technical contact Format equal to tech-c in [1]. guardian: e-mail and/or postal address of domain guardian. Analogue to AS guardian in [1]. source: Source of the information. Equal to source field in [1]. remark: remarks or comments Equal to remark field in [1] changed: Who and when of last change. Equal to change field in [1]. CLNS routing-domain object Page 7 Example: _________ dom-prefix: 39.528f.1100 descr: SURFnet-CLNS domain. bis: 39.528f.1100.1000.2000.0000.0001.0000.0c04.29b4.00 39.528f.1103 dom-in: 39.528f.1103 100 ANY AND NOT 39.528f.1100.0009.10 dom-in: 39.528f.1100.0009.10 100 39.528f.1100.0009.10 dom-out: 39.528f.1103 39.528f.1100 AND NOT 39.528f.1100.0009.10 dom-out: 39.528f.1100.0009.10 39.528f.1100 default: 39.528f.1103 10 admin-c: Victor Reijs tech-c: Henk Steenman guardian: domain-guardian@surfnet.nl source: RIPE changed: henk@sara.nl 930716 SURFnet accepts from EMPB ( 39528f1103 ) all prefixes but one, 39.528f.1100.0009.10, which is PTT-research that is connected to both EMPB and SURFnet. From PTT-research SURFnet only accepts the PTT-research prefix. SURFnet announces to EMPB, 39.528f.1100 but not 39.528f.1100.0009.10. To PTT-research only 39.528f.1100 is announced. Translated to static routing; on the SURFnet BIS connected to PTT- research, there is a static route to 39.528f.1100.0009.10. And on the SURFnet BIS connected to EMPB there is a static route to all other know prefixes. On both the PTT-reserach and EMPB BIS's connected to SURFnet there is a static route to 39.528f.1100. CLNS routing-domain object Page 8 Appendix A. ___________ Definition of NSAP structure is defined in OSI 8348 Ad2 [2]. In general: NSAP's are always an integer number of octets where the AFI is always one octet and the IDI is always an integer number of octets. NSAP's are hierarchical structured and once the AFI is decided upon, structuring of the rest of the NSAP is up to authorities down the tree. Two common AFI are 47 and 39 and can be described by some general rules. AFI: 39 Describes that the following two octets are the ISO DCC country codes. Since these codes are always described by three digits, padding with an "f" is necessary to complete the 2 octets. Further structure is done by the authority for each country and there is no general rule. AFI: 47 IDI: 4 defines OSINET. Followed by a two byte organisation identifier. IDI: 5 defines US-GOSIP Version 1 defines a two byte organisation identifier. Version 2 defines a one byte data format identifier, a two byte zero field a three byte administrative authority a two byte routing domain id. CLNS routing-domain object Page 9 References __________ [1] : RIPE-81, Representation of IP routing Policies in the RIPE database, Tony Bates, Jean-Michel Jouanigot, Daniel Karrenberg, Peter Lothberg and Marten Terpstra, Feb. 1993 [2] : OSI 8348 Ad2 Network Services Definition, Addendum 2, covering Network Layer Addressing. --------