- db-wg - mailman.ripe.net

Re: [db-wg] Removing personal data from bulk output from the RIPE Database
by Tore Anderson 09 May '13

09 May '13

* denis(a)ripe.net > Unfortunately no dump will help you with this process. The "changed:" > attribute is almost useless. For what you want to do it IS useless. The > syntax requires all objects to have at least one mandatory "changed:" > attribute. The user can set the date to almost anything. It can be > tomorrow or ten years ago. When the object is changed, there is no > requirement to make any changes to this date or add any additional > "changed:" attributes. It is user generated and only has meaning to the > user. What you want to do would only work if these were auto generated > timestamps by the update software. But that is not the case. That may be so. But to turn it around - are you of the opinion that the LIRs to a great extent are deliberately supplying incorrect changed dates? If "no", it would be good enough for me, really. For my uses, an approximation will suffice. To be honest, I would actually be more concerned about the number being wrong because of LIRs assigning addresses to their customers without registering the assignments in the database, than I would be about LIRs registering their assignments, but with incorrect dates. BTW - the update software *does* generate time stamps. At least, I always send only my e-mail address, the bot does the rest. Tore

1 0

Re: [db-wg] Removing personal data from bulk output from the RIPE Database
by Tore Anderson 09 May '13

09 May '13

(Apologies for breaking threading, I just subscribed to the list.) In general, the proposal seems fine to me and I agree with its goals. In preparing for my APWG presentation next week, I've been wanting to find the answer to the question «how many IPv4 PA Assignments have been registered between dates A and B?». I thought I could do this by examining the inetnum database export - but that didn't work out, due to the fact that all the "changed:" attributes gets rewritten to "unread‌‌(a)ripe.net 20000101". So while I don't care about the e-mail addresses, I'd need the dates to be left intact. Also, the current algorithm folds all changed attributes into a single one. It's not clear from the Labs article whether or not this practise will stop - I hope it will. Would it by any chance be possible to get a sneak preview of the new inetnum dump, so that I could find the numbers I want before heading to Dublin? If so that would be greatly appreciated! Best regards, Tore Anderson

2 1

Reclaim Functionality for Resource Holders
by Denis Walker 29 Apr '13

29 Apr '13

Dear colleagues, With the new RIPE Database software now in place, the RIPE NCC has been able to automate a process that was previously handled manually. This process now allows resource holders to reclaim any operational database object related to the resources allocated and assigned to them by the RIPE NCC. You can find more details in a new article on RIPE Labs: https://labs.ripe.net/Members/denis/reclaim-functionality-for-resource-hold… Regards Denis Walker Business Analyst RIPE NCC Database Group

2 1

RIPE66 DB-WG Draft Agenda V1
by Wilfried Woeber 17 Apr '13

17 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear DB-WG folks, Chairpersons, "Meeting"! This is the 1st draft of an agenda for the DB-WG Meeting at RIPE66 in Dublin, May 15, 2013. For time slot allocations please refer to the most up-to-date meeting plan at https://ripe66.ripe.net/programme/meeting-plan/ The DB-WG Meeting is scheduled for *Wednesday*, starting at 09:00 local time / 08:00 UTC in the morning. The length of our timeslot is 90 Minutes. The overall (draft) RIPE 66 meeting outline is already available at https://ripe66.ripe.net/programme/meeting-plan/ Please feel free to propose additional topics to be discussed! I'd also suggest that you submit your points of view regarding the topics on the proposed agenda on the mailing list, preferably before the WG meeting's start :-) Best regards, hope to see you soon in Dublin, Wilfried. ________________________________________________________________________ A. Administrative Matters . Welcome . select scribe . finalise agenda . approval of minutes from previous WG meeting(s) . review of action list B. Data Base Operational Update (Kaveh Ranjbar, RIPE NCC) C. New DB-Software functionality - in beta - proposed D. Status update on IETF WEIRDS activities (N.N. t.b.c.) Y. Input from other Working Groups and/or Task Forces - review of abuse contact stuff (N.N. t.b.c.)) Z. AOB ________________________________________________________________________ 17.04.2013 16:00 UTC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (MingW32) iQCVAwUBUW7IBd/RXX7wrLNpAQJymwP8D1Vt3oXoSkrfFuX05mNS2FLNIwucVYha uiAV89Zzk7uTxXa8dAQDpJgrVXIqaqaUgTjqpl1k8kYC85iuFsC8SEvjqQyx4czI oO99voS2x/qDXKI3nJj++4nuvswdDutYxSS5/ETk46sNWR8lsscMJ3Y8li1ttLEt eAJzPP8s9SQ= =YObZ -----END PGP SIGNATURE-----

1 0

Object Tags: a new feature proposal
by Kaveh Ranjbar 17 Apr '13

17 Apr '13

Dear colleagues, We would like to propose a method for providing metadata about objects in the RIPE Database. This new feature will enable a lot of flexibility to inform users about the state of each object and will help improve the quality of data in the RIPE Database. It can also provide a mechanism to fine-tune RIPE Database query outputs, which will give users who have less knowledge about address hierarchy, placeholder objects, etc. easier access to the data they are looking for. You can find more information about this proposal, along with some examples, at: https://labs.ripe.net/Members/kranjbar/ripe-database-object-tags Please kindly provide us with your feedback. Kind regards, Kaveh Ranjbar RIPE NCC Database Group Manager

1 0

Access to historical data in the RIPE database
by Nigel Titley 16 Apr '13

16 Apr '13

Following the announcement and the general positive feedback on this list, the RIPE NCC will be shortly enabling access to historical data in the RIPE database. Best regards Nigel

2 1

Addition of long query options
by Kaveh Ranjbar 05 Apr '13

05 Apr '13

Dear colleagues, With the latest RIPE Database software release, we introduced the choice of longer names for query options. Now each existing query option has an equivalent long name starting with a double dash. These names are more descriptive than the single character options. For example, "-x", which represents exact match searches, has "--exact" as its longer equivalent. The existing behaviour doesn't change; these long names can be used in addition to the short ones, which are all still valid. Using these longer names allows for more descriptive queries. When a query is passed on to a colleague or when it is coded inside a script, the reader will have a better understanding of what the query is searching for without having to consult the documentation. It also allows more flexibility to introduce new query options as more features are added to the RIPE Database. Below you will find the full list of RIPE Database query server options. This list can be generated any time with the query "whois -h whois.ripe.net help" as well. Kind Regards, Kaveh Ranjbar, RIPE NCC Database Group Manager. ... % The following options are available: % % -x, --exact <ip-lookup> % Requests that only an exact match on a prefix be performed. If no % exact match is found no objects are returned. % % -l, --one-less <ip-lookup> % Returns first level less specific inetnum, inet6num or route(6) % objects, excluding exact matches. % % -L, --all-less <ip-lookup> % Returns all level less specific inetnum, inet6num or route(6) % objects, including exact matches. % % -m, --one-more <ip-lookup> % Returns first level more specific inetnum, inet6num or route(6) % objects, excluding exact matches. % % -M, --all-more <ip-lookup> % Returns all level more specific inetnum, inet6num or route(6) % objects, excluding exact matches. % % -C, --no-irt <ip-lookup> % Turns off default option '-c' or '--irt'. % % -c, --irt <ip-lookup> % Requests first level less specific inetnum or inet6num objects with % the "mnt-irt:" attribute (enabled by default). % % -b, --abuse-contact <ip-lookup> % Requests first level less specific inetnum or inet6num objects with % the "abuse-c:" reference. Only object keys and "abuse-mailbox:" % attributes are visible. % % -d, --reverse-domain <ip-lookup> % Enables use of the -m, -M, -l and -L flags for lookups on reverse % delegation domains. % % -i, --inverse <attribute-name> <inverse-key> % Perform an inverse query. % % -F, --brief % Produce output using short hand notation for attribute names. % % -K, --primary-keys % Requests that only the primary keys of an object to be returned. The % exceptions are set objects, where the members attributes will also % be returned. This flag does not apply to person and role objects. % % -k, --persistent-connection (optional normal query) % Requests a persistent connection. After returning the result the % connection will not be closed by the server and a client may issue % multiple queries on the same connection. % Note, that server implements 'stop-and-wait' protocol, when no next % query can be sent before receiving a reply for the previous one. % Except the first -k query, -k without an argument closes the % persistent connection. % % -G, --no-grouping % Disables the grouping of objects by relevance. % % -B, --no-filtering % Disables the filtering of "notify:", "changed:" and "e-mail:" % attributes. % % -r, --no-personal % Switches off recursion for contact information after retrieving the % objects that match the lookup key. % % -T, --filter-types (comma separated list of object types, no white space is allowed) % Restricts the types of objects to lookup in the query. % % -a, --all-sources % Specifies that the server should perform lookups in all available % sources. See also "-q sources" or "--all-sources" query. % % -s, --sources (comma separated list of sources, no white space is allowed) % Specifies which sources and in which order are to be looked up when % performing a query. % % -q (sources|version|types) % "sources" see list-sources. % "version" see version. % % --list-sources % Returns the current set of sources along with the information % required for mirroring. See [REF], section 2.9 "Other server % features" for more information. % % --version % Displays the current version of the server. % % -t, --template <object-type> % Requests a template for the specified object type. % % -v, --verbose <object-type> % Requests a verbose template for the specified object type. % % -V, --client <client-tag> % Sends information about the client to the server. ...

1 0

Access to historical data in the RIPE Database
by Kaveh Ranjbar 04 Apr '13

04 Apr '13

Dear colleagues, We would like to propose making the history of changes to objects available through the RIPE Database. This is one of the most requested features and will help different groups of users by providing more information about objects in the database. Our proposal, along with examples and details about possibilities and restrictions, is published at: https://labs.ripe.net/Members/kranjbar/proposal-to-display-history-of-objec… If accepted, we can enable this feature in a Beta state quite quickly. Please kindly provide us with your feedback. Kind regards, Kaveh Ranjbar, RIPE NCC Database Group Manager

2 1

[news] Phase 1 Update: Abuse Contact Management in the RIPE Database
by Kaveh Ranjbar 03 Apr '13

03 Apr '13

[Apologies for duplicate emails] Dear colleagues, Phase 1 of ripe-563 "Abuse Contact Management in the RIPE Database" is now being implemented, as announced on 19 March 2013. According to ripe-563, all resources allocated or assigned by the RIPE NCC will need to have an abuse contact email address included in their RIPE Database registration. During the first six months of implementation (phase 1), all Local Internet Registries (LIRs) must add an abuse contact attribute ("abuse-c:") to their LIR's ORGANISATION object to provide abuse contact information for all of the allocated address space under their LIR. Since the initial announcement two weeks ago, we are pleased to report that 24.8% of the RIPE NCC's allocated IPv4 address space is already covered with an abuse contact. More statistics will be sent to the RIPE Anti-Abuse Working Group mailing list. In phase 1, we will send notifications to LIRs that haven't added abuse contact information to their LIR's ORGANISATION object. If this information is not added by the LIR by the end of phase 1, we will automatically add the LIR's contact email address (which is already publicly listed at: <https://www.ripe.net/membership/indices/>) as their abuse contact. LIRs can always change this information as needed. More information on the implementation plan, including phase 2 (covering PI space and ASNs) is available on RIPE Labs at: <https://labs.ripe.net/Members/kranjbar/implementation-details-of-policy-201…> ------------------------------- How to add "abuse-c" ------------------------------- An explanation of how to add "abuse-c:" to an LIR's ORGANISATION object as well as how to fine-tune abuse contact information for sub-allocations and assignments is outlined here: <https://labs.ripe.net/Members/denis/creating-and-finding-abuse-contacts-in-…> Please kindly consider adding abuse contact information as soon as possible to the ORGANISATION object(s) you control or maintain in the RIPE Database. Kind Regards, Kaveh Ranjbar, RIPE NCC Database Group Manager

1 0

Call for agenda items, DB-WG Meeting during RIPE66, Dublin, IE
by Wilfried Woeber 22 Mar '13

22 Mar '13

Dear DB-WG folks, planning activities for the next RIPE Meeting - RIPE66 in Dulin, IE, May 13 - May 17, 2013, have already started a while ago - thus this _call for agenda items_ for the meeting of the Database Working-Group. Please submit (to the WG list!) your item requests and|or suggest topics for discussion to be included in the draft agenda! Please note that the DataBase-WG meeting is *at the moment* scheduled for *Wednesday* (starting at 9:00 local time). This is according to the *draft* meeting plan - which is pretty stable already but may still need to be changed as we get closer to the meeting date! The overall (draft) RIPE 66 meeting outline is already available at https://ripe66.ripe.net/programme/meeting-plan/ Looking forward to a successful meeting and see you soon in Ireland, Wilfried.

1 0