May 2019 - db-wg - mailman.ripe.net

GDPR and the RIPE Database
by Edward Shryane 08 Oct '19

08 Oct '19

Dear Working Group, as mentioned in last week's DB-WG meeting, we will shortly be implementing the following changes: - Do not include personal data in historical queries (notify, e-mail, address attributes). - Do not include person/role references in historical queries (admin-c, tech-c, ping-hdl, zone-c). A legal review found we should not return historical contact details, as they may contain personal data, which is not in line with the purpose of the RIPE database or data protection legislation. For background, Maria Stafyla from RIPE NCC Legal presented on this topic at RIPE 76: https://ripe76.ripe.net/presentations/101-GDPR-Database-WG-RIPE-76.pdf Regards Ed Shryane RIPE NCC

4 8

Extending Unreferenced Object Cleanup
by Edward Shryane 21 Aug '19

21 Aug '19

Dear Working Group, as presented at last week's DB-WG meeting, I'd like to extend the current Unreferenced Object Cleanup: https://www.ripe.net/manage-ips-and-asns/db/support/clean-up-of-unreference… which deletes the following unreferenced objects after 90 days: - organisation, mntner, person, role objects - mntner - person/role pairs to also delete the following groups of unreferenced objects after 90 days: - mntner - organisation pairs - organisation - person/role pairs - mntner - person/role - organisation groups This change affects a small number of objects in the database, but is consistent with the goal of removing unnecessary data. Please give me your feedback on this proposal, in particular if there are operational reasons to retain this data. Regards Ed Shryane RIPE NCC

4 4

Whois Release Process
by Cynthia Revström 24 Jun '19

24 Jun '19

Hello DB-WG, Ed proposed a change to the WHOIS release process at the DB-WG session @ RIPE78. This change would be to immediately deploy bug fixes without a release candidate. I would just like to voice my opinion on it, so my thought is that maybe give the db-wg 24h to voice opinions or something like that. Just a thought but anyways. - Cynthia

4 5

Authenticating References to Objects
by Edward Shryane 04 Jun '19

04 Jun '19

Dear Working Group, as mentioned at last week's DB-WG meeting, I'd like to propose extending authenticating references to other objects. Currently, only references to organisation objects can be protected with the mnt-ref attribute. However, we could extend this protection to other types of objects: - Abuse-c role - Technical contact, admin contact, zone contact etc. (person/role) - Organisation maintainer(s) This would prevent unauthorised references to an organisation's objects (e.g. to impersonate a third party or mis-direct abuse email). Please let me know your feedback on this proposal. Regards Ed Shryane RIPE NCC

8 10

NWI-9 In-band notification mechanism - proposed Solution Definition
by Edward Shryane 28 May '19

28 May '19

Dear Working Group, given the Problem Definition for NWI-9: "There is a need within the routing community to have changes to all/nominated routing data objects in the RIPE Database pushed out to them, regardless of membership status." As presented at last week's DB-WG meeting, I'd like to propose a Solution Definition: (1) The current NRTM service is not suitable. The current NRTM is a member-only service, with a separate agreement: https://www.ripe.net/manage-ips-and-asns/db/nrtm-mirroring The work needed to change this (including technical changes to open the service) is greater than providing a re-implementation. The existing service will remain available on the same terms. (2) Implement a replacement NRTM interface The current NRTM is a custom protocol, which is complicated to use, and not easy to extend without breaking existing clients. Instead implement a replacement NRTM interface, based on modern standards. - The interface is generally available without needing to be a member, or to sign an agreement. - The protocol uses HTTPS and WebSockets, with object data in JSON format. - A client can request the current available range of updates, and also request a closed or open range of updates. - A separator comment is inserted between updates, with an 'end of stream' comment after each group of updates. - All object updates are returned, except for person and role objects. - Personal data is filtered from all object updates, consistent with the other query interfaces. - A client can optionally request filtering updates by object type. - A client can optionally identify themselves by providing credentials. - The interface can be extended later by adding more request parameters. Please let me know what you think. Regards Ed Shryane RIPE NCC

3 2

Suggestion further validity-checking
by Jens Ott - Opteamax GmbH 28 May '19

28 May '19

Dear DB-WG, I am newly subscribed to this mailing-list although I am already active in RIPE-community for quite some time. Some of you might know me in person. To be honest, I am not sure if this is the right place to send my mail to and if it's not I'd be happy to be told who to address better. For debugging our prefix-list-generator I increased verbosity of the tool a little. As side-effekt I was also pointed to a route-object in the ripe-database which contains a "hole"-definition where the netmask doesn't match (X.Y.226.0/21) and actually is the same size as the entire route-object. I already contacted the maintainer of that object but think it might be a good idea to add a validity-check on adding new objects to prevent this kind of faulty objects in the DB. Best regards -- Jens Ott Geschäftsführer Opteamax GmbH Simrockstr. 4b 53619 Rheinbreitbach Tel.: +49 2224 969500 Fax: +49 2224 97691059 Email: jo(a)opteamax.de HRB: 23144, Amtsgericht Montabaur Geschäftsführer: Jens Ott Umsatzsteuer-ID.: DE264133989

6 10

NWI-8: LIR's SSO Authentication Groups - Implementation Plan
by Edward Shryane 27 May '19

27 May '19

Dear working group, here is the RIPE NCC's proposed implementation plan for NWI-8: LIR's SSO Authentication Groups. Scope - To simplify the implementation, synchronisation will be done using the existing SSO authentication method. - Authentication groups (and any new authentication method) will be deferred until later. Introduction - The synchronisation of non-billing users with the RIPE database will be done with a default maintainer. - Setting a default maintainer for the organisation is a pre-requisite for synchronisation. - A default maintainer is already able to maintain the organisation object and top-level resources. - Extending this existing mechanism simplifies the synchronisation of users. Implementation - A new checkbox will be added to the Account Details page in the LIR Portal, in the Maintainer section. - "Synchronise non-billing users with the default maintainer". - If no default maintainer is set, the checkbox is disabled. - The synchronise checkbox is not checked by default (the user must confirm this action first). - When the user enables the synchronise checkbox, they must first authenticate with the default maintainer. - The user must prove they control the maintainer before user accounts are added to it. - If the user's account is already present on the maintainer, this authentication is automatic. - Otherwise if the maintainer contains any password credentials, the user will be asked for a password. - Otherwise the user is asked to first add their credentials to the maintainer separately. - Once the checkbox is enabled, synchronisation is performed. - Any existing user accounts are removed from the maintainer. - Any non-billing user accounts are added to the maintainer. - Any other credentials (passwords or PGP keys) are not affected. - After synchronisation is enabled - Whenever a non-billing user is added or removed from the organisation, the default maintainer is updated accordingly. - A default maintainer can only be synchronised with a single organisation. - If a user is removed from one organisation, but remains in a different organisation, this would create a conflict when synchronising. - If synchronisation is disabled - Users are no longer synchronised with the default maintainer, but existing user accounts are not removed. - Notifications - To receive email notifications when the default maintainer is updated, use the notify: and/or mnt-nfy: attribute(s) on the maintainer itself. Regards Ed Shryane RIPE NCC

3 3

Agenda RIPE78 - Database Working Group
by William Sylvester 15 May '19

15 May '19

Database WG Members, Please find the attached agenda for the RIPE Database Working group meeting in Iceland. Regards, William & Denis A. Introduction - 5 min * Welcome * Scribe * Jabber * Agenda B. Operational Update RIPE Database – 20 mins Edward Shryane, RIPE NCC C. Personal Data in the RIPE Database – 15 mins Denis Walker D. Cleaning Up Locked Persons – 10 mins Edward Shryane, RIPE NCC E. Country Codes Proposal – 10 mins Nikolas Pediaditis, RIPE NCC F. NWI - Open Proposals – 5 mins Z. AOB (open discussion)

1 0

Whois Release 1.94
by Edward Shryane 08 May '19

08 May '19

Dear Working Group, RIPE Database release 1.94 has been deployed to the Release Candidate environment. If no issues are found, we plan to deploy to production on Wednesday, 8th May. Release 1.94 includes the following changes: * Notify the user in the abuse-c comment if address validation has not been completed. * Improved email address validation. * Perform daily limit accounting for personal data in the Full Text Search interface. * Do not remove an abuse-mailbox attribute from a role object, if that role is referenced in a resources' abuse-c attribute. The complete list of changes in this release can be found in GitHub: https://github.com/RIPE-NCC/whois/blob/master/changes.txt The release notes have been published: https://www.ripe.net/manage-ips-and-asns/db/release-notes More information on the Release Candidate environment can be found on our website: https://www.ripe.net/manage-ips-and-asns/db/release-notes/rc-release-candid… Please let us know if you find any issues with this release in the RC environment. Regards Ed Shryane RIPE NCC

1 1