dosfrk, My best guess is: Your sql password is longer than 8 chars (which is the upper limit). If so, please set it to a password shorter than or equal to 8 chars, change it in your config, and retry. Please let me know of the result. Regards, On 2004-06-02 12:13:55 +0100, dosfrk@intnet.bj wrote:
Thank Engin! These are config.sample files!
regards
dosfrk,
There must be a problem in your configuration files. Could you please send your rip.config.sample and the source.config file that is mentioned in your rip.config.sample to <ripe-dbm@ripe.net>? Please remember to obfuscate the passwords in them.
Regards,
On 2004-06-01 19:28:08 +0100, dosfrk@intnet.bj wrote:
Hi, I've got an error when attempt to run make_db script during ripe-dbase-3.2.0 installation: ./make_db -c /usr/local/whoisd/conf/rip.config.sample -s SAMPLE -1 Error: Non-existent database "SAMPLEDB" referenced !!! died: +792 ca_sourceLoader.c ************** ERROR *************** *** 18:31:02 unknown source SAMPLE ************************************
I made change in my source.sample file : DATABASE SAMPLEDB host: localhost port: 3306 trx_support: n user: whois_admin password: ******** /DATABASE
Any ideas?
Kind regards.
-- Engin Gunduz RIPE NCC Software Engineering Department
# Copyright (c) 2000 RIPE NCC # # All Rights Reserved # # Permission to use, copy, modify, and distribute this software and its # documentation for any purpose and without fee is hereby granted, # provided that the above copyright notice appear in all copies and that # both that copyright notice and this permission notice appear in # supporting documentation, and that the name of the author not be # used in advertising or publicity pertaining to distribution of the # software without specific, written prior permission. # # THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING # ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS; IN NO EVENT SHALL # AUTHOR BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY # DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN # AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
# Example sources.config
# Any line that begins with a '#' is ignored. # Blank lines are also ignored. # Comments can only be at the beginning of a line. Currently, they # cannot be inside a definition.
# A definition begins with uppercase text. Currently, there are # three types of definition object: DATABASE, NRTM (near-real-time # mirror) and SOURCE. Each object is identified by a name which comes # immediately after the object type and is on the same line. This # name is also in uppercase text. # # Definitions end with /<object type> at the beginning of a line.
# Currently, all variables are mandatory. E.g., in the definition # of a SOURCE, "nrtm" must be present. Thus, a dummy definition of # an NRTM may be necessary. #
# This is the definition of a MySQL database, # with all relevant data. # # Customise: # sqlhost - the hostname of MySQL server # 3306 - mysqld port # trx_support - does the database support transactions? (values can be 'y' or 'n') # dbuser - MySQL user name (use make_mysql_user) # dbpsw - MySQL user password DATABASE SAMPLEDB host: localhost port: 3306 trx_support: n user: whois_admin password: ****** /DATABASE
# You can have more than one definition of a database: # Remove comments if you plan to use it # #DATABASE YOURDB #host: yourBox #port: 3306 #user: you #password: yourPswd #/DATABASE
# This is the definition of a near-real-time mirror client: # # host: the machine on which the server runs. # port: the port number on which the mirror-server listens. # delay: the delay (in seconds) between requests to the server for updates. # protocolVersion: the version number of the NRTM protocol (typically 1). # NRTM SPIEGEL host: mirror.server.net port: 4444 delay: 60 protocolVersion: 1 /NRTM
# The definition of sources must always be after the definitions # of databases and mirrors. However, databases and mirrors can # be defined in any order. A source can use any predefined database # or mirror. #
# Definition of source "TEST" # # database: It uses the "MYDB" database (defined above). # opMode: Operation Mode. Its most frequently-used values are: # 0 static snapshot (no updates possible) # 2 update server (processes requests from DBupdate) # 4 NRTM client. # updPort: the update port, i.e. the port on which the RIP server listens for # updates to this source via dbupdate. # canupd: can this database be updated? (y/n) # deflook: is this the default look-up source? (y/n) # nrtm: the name of the near-real-time mirror used by this database (see above). # SOURCE SAMPLE database: SAMPLEDB opMode: 2 updPort: 43004 canupd: y deflook: y nrtm: SPIEGEL /SOURCE
# Definition of source "PRODUCTION" # # It uses the "YOURDB" database (defined above). # Remove comments if you plan to use it # #SOURCE PRODUCTION #database: YOURDB #opMode: 2 #updPort: 123456 #canupd: y #deflook: y #nrtm: SPIEGEL #/SOURCE # Copyright (c) 2000 RIPE NCC # # All Rights Reserved # # Permission to use, copy, modify, and distribute this software and its # documentation for any purpose and without fee is hereby granted, # provided that the above copyright notice appear in all copies and that # both that copyright notice and this permission notice appear in # supporting documentation, and that the name of the author not be # used in advertising or publicity pertaining to distribution of the # software without specific, written prior permission. # # THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING # ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS; IN NO EVENT SHALL # AUTHOR BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY # DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN # AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
## "Generic" configuration file for RIP. ## There are quite a few variables to configure; ## however, you can leave part of the variables ## if you don't use a part of the software (e.g. dbupdate). ## Please don't forget to also modify your $SOURCEFILE.
###################### ### ### GENERIC VARIABLES ### ######################
# # The directory where all sorts of lockfiles are kept
LOCKDIR /usr/local/whoisd/var/lock
# # The directory where all sorts of temporary files # are kept. # # make sure that this directory is owned by the 'updating process' # user and cannot be written by other users
TMPDIR /usr/local/whoisd/var/tmp
# # Where is the RIPADMIN database # Syntax: # RIPADMIN MySQL_Host,MySQL_Port,MySQL_User,MySQL_Password,MySQL_RIPADMIN_DB
RIPADMIN sqlhost,3306,dbuser,dbpsw,RIPADMIN
# # Location of the file containing the SOURCE variables
SOURCEFILE /usr/local/whoisd/conf/sources.config.sample
###################### ### ### LOGFILE DEFINITIONS ### ######################
## These variables indicate base filenames; ## the subdirectories have to be created manually beforehand.
## ## Query log ##
QRYLOG /usr/local/whoisd/log/qry/qrylog
## ## Error logs ##
# # All dbupdate errors (only needed if you use dbupdate)
DBUPERR /usr/local/whoisd/log/dbuperr/dbuperrlog
# # All whois_rip errors
ALLRIPERR /usr/local/whoisd/log/riperr/riperrlog
# # Audit log: security-related messages
RIPAUDIT /usr/local/whoisd/log/audit/auditlog
# # Mirroring log
RIPMIRLOG /usr/local/whoisd/log/mirror/mirrorlog
# # Server log: all administration messages (startup, shutdown, etc) # and errors
RIPSVRLOG /usr/local/whoisd/log/svr/svrlog
# # SQL errors
SQLOG /usr/local/whoisd/log/sql/sqlog
# # All update transactions are logged here
RIPUPDLOG /usr/local/whoisd/log/ripupd/ripupdlog
## ## Update logs ## You need them only if you use dbupdate ##
# # The file where all update requests are logged # It must be rotated externally if needed
UPDLOG /usr/local/whoisd/log/upd/updlog
# # The file where all acknowledgements are logged # It must be rotated externally if needed
ACKLOG /usr/local/whoisd/log/ack/acklog
# # The file where all notifications are logged # It must be rotated externally if needed
NOTIFLOG /usr/local/whoisd/log/notif/notiflog
# # The file where all forwardings are logged # It must be rotated externally if needed
FORWLOG /usr/local/whoisd/log/forw/forwlog
###################### ### ### WHOISD VARIABLES ### ######################
# # KEEPOPEN [not implemented yet] # Keep connection open for at most KEEPOPEN seconds for # network updates & whoisd '-k' keep connection open option
KEEPOPEN 180
# # Port for the whois server
SVWHOIS_PORT 43001
# # Port for the config interface
SVCONFIG_PORT 43002
# # Port for the mirroring server
SVMIRROR_PORT 43003
########### ## ## Files ##
# # Location of the help file printed in response # to "whois help" queries
PW_HELP_FILE /usr/local/whoisd/doc/WHOIS-HELP
########### ## ## Access control ##
## ## In short, access control works in the following way: ## the more you query, the more your "ACL points" grow, ## until at a certain point you are blocked. ## First temporarily, then permanently. ## For temporary blocks, your points decay in time. ## These variables configure the decay time.
## (You probably don't want to change these variables).
# # Interval of the decay (in seconds)
AC_DECAY_INTERVAL 600
# # Halflife of the decay (in seconds)
AC_DECAY_HALFLIFE 43200
# # auto save of access tree
AC_AUTO_SAVE 1
# # Startup loading of access tree data stored on persistence
AC_LOAD 1
# # Interval of making persistence (in seconds)
AC_SAVE_INTERVAL 1200
########### ## ## Response texts ##
## The only things you need to change here are the ## pointers to your own URLs and specific site-related information.
# # Banner. This text comes out before the query is answered.
PW_BANNER % This is the MyDB Whois server.
# # Standard response header
PW_RESP_HEADER % Rights restricted by copyright. PW_RESP_HEADER % See http://www.mydb.net/db/copyright.html
# # Access control limit reached
PW_FMT_LIMIT_REACHED %%ERROR:202: access control limit reached for %s PW_FMT_LIMIT_REACHED %% PW_FMT_LIMIT_REACHED %% You have reached the limit of returned contact information objects. PW_FMT_LIMIT_REACHED %% This connection will be terminated now. PW_FMT_LIMIT_REACHED %% Continued attempts to return excessive amounts of contact PW_FMT_LIMIT_REACHED %% information will result in permanent denial of service. PW_FMT_LIMIT_REACHED %% Please do not try to use CONTACT information in PW_FMT_LIMIT_REACHED %% My Database for non-operational purposes. PW_FMT_LIMIT_REACHED %% Refer to http://www.mydb.net/db/copyright.html for more information.
# # Access denied permanently
PW_FMT_ACL_PERMDENY %%ERROR:201: access denied for %s PW_FMT_ACL_PERMDENY %% PW_FMT_ACL_PERMDENY %% Sorry, access from your host has been permanently denied PW_FMT_ACL_PERMDENY %% because of a repeated abusive behaviour. PW_FMT_ACL_PERMDENY %% Please contact <my-dbm@mydb.net> for unblocking.
# # Too many connections from the host
PW_FMT_ACL_CONNDENY %%ERROR:208: connection refused for %s PW_FMT_ACL_CONNDENY %% PW_FMT_ACL_CONNDENY %% Sorry, your connection is refused. PW_FMT_ACL_CONNDENY %% Too many simultaneous connections from your host.
## ## You don't need to change the following response texts ##
# # No key supplied in query
PW_ERR_NOKEY %ERROR:106: no search key specified PW_ERR_NOKEY % PW_ERR_NOKEY % No search key specified
# Line too long
PW_ERR_LINETOOLONG %ERROR:107: input line too long PW_ERR_LINETOOLONG % PW_ERR_LINETOOLONG % Input exceeds the maximum line length.
# # For data retrieved with the "-K" flag
PW_K_FILTER % Note: this output has been filtered. PW_K_FILTER % Only primary keys will be visible. PW_K_FILTER % Contact information will not be shown
# # User is not authorised to pass IP addresses with "-V" flag
PW_FMT_ACL_ADDRPASS %%ERROR:203: address passing not allowed for %s PW_FMT_ACL_ADDRPASS %% PW_FMT_ACL_ADDRPASS %% Sorry, you are not allowed to pass addresses on the query line . PW_FMT_ACL_ADDRPASS %% Please contact us for such permission. For the moment, continuing PW_FMT_ACL_ADDRPASS %% this will cause permanent denial of access.
# # No object found
PW_NOTFOUND %ERROR:101: no entries found PW_NOTFOUND % PW_NOTFOUND % No entries found in the selected source(s).
# # The connection is administratively or abnormally closed
PW_CONNCLOSED %ERROR:301: connection has been closed PW_CONNCLOSED % PW_CONNCLOSED % The connection has been closed.
# # Unknown attribute in query
QC_FMT_BADATTR %%ERROR:104: unknown attribute QC_FMT_BADATTR %% QC_FMT_BADATTR %% "%s" is not a known attribute.
# # The attribute specified is not inverse searchable
QC_FMT_ATTRNOTINV %%ERROR:105: attribute is not searchable QC_FMT_ATTRNOTINV %% QC_FMT_ATTRNOTINV %% "%s" is not an inverse searchable attribute.
# Illegal character in query
QC_BADINPUT %ERROR:108: bad character in input QC_BADINPUT % QC_BADINPUT % An invalid character was passed in the query. Allowed QC_BADINPUT % characters are letters, numbers, and these: -_:+=.,@/?'.
# # There is no such source
QC_FMT_BADSOURCE %%ERROR:102: unknown source QC_FMT_BADSOURCE %% QC_FMT_BADSOURCE %% "%s" is not a known source. QC_FMT_BADSOURCE %% Use "-q sources" to list known sources.
# # There is no such object type
QC_FMT_BADOBJTYPE %%ERROR:103: unknown object type QC_FMT_BADOBJTYPE %% QC_FMT_BADOBJTYPE %% "%s" is not a known object type. QC_FMT_BADOBJTYPE %% Use "-q types" to list known object types.
# # Multiple "-V" flags were used to pass IP addresses
QC_DUPPROXYIPFLAG %ERROR:205: multiple addresses passed by proxy QC_DUPPROXYIPFLAG % QC_DUPPROXYIPFLAG % More than one -V flag passed the address of a client. QC_DUPPROXYIPFLAG % This is an error in the proxy server. Please contact QC_DUPPROXYIPFLAG % the administrator of the server and report this error.
# # Duplicate IP flags QC_FMT_DUPIPFLAG %%WARNING:901: duplicate IP flags passed QC_FMT_DUPIPFLAG %% QC_FMT_DUPIPFLAG %% More than one IP flag (-l, -L, -m, -M, -x, or -c) passed to the server. QC_FMT_DUPIPFLAG %% Only "-%s" will be used for this query.
# # Useless IP flags
QC_USELESSIPFLAG %WARNING:902: useless IP flag passed QC_USELESSIPFLAG % QC_USELESSIPFLAG % An IP flag (-l, -L, -m, -M, -x, or -c) used without an IP key.
# # Useless no-referral flag
QC_USELESSNOREFFLAG %WARNING:904: useless no-referral flag passed QC_USELESSNOREFFLAG % QC_USELESSNOREFFLAG % The -R flag used for a non-domain key.
# # Fixed lookup
QC_FMT_FIXEDLOOKUP %%WARNING:905: fixed lookup key QC_FMT_FIXEDLOOKUP %% QC_FMT_FIXEDLOOKUP %% The key "%s" has been changed to "%s" for lookup.
## ## Referral texts ## (You probably don't want to change them) ##
# # Referral timeout (in seconds)
REFERRALTIMEOUT 15
# # Referral timeout error
QI_REF_TMOUT %ERROR:302: referral timeout QI_REF_TMOUT % QI_REF_TMOUT % Referral timeout
# # Maximum referral lines allowed
REFERRALMAXLINES 250
# # Maximum referral lines exceeded message
QI_REF_OVERMAXLIN %ERROR:204: maximum referral lines exceeded QI_REF_OVERMAXLIN % QI_REF_OVERMAXLIN % Referral reply line limit exceeded
# # No referral host
QI_REF_BADHOST %ERROR:303: no referral host QI_REF_BADHOST % QI_REF_BADHOST % Referral host not found
# # Host not responding
QI_REF_HOSTNOTTRESP %ERROR:304: referral host not responding QI_REF_HOSTNOTTRESP % QI_REF_HOSTNOTTRESP % Referral host not responding
# # Referral header
QI_FMT_REFHEADER %% The object shown below is NOT in the %s database. QI_FMT_REFHEADER %% It has been obtained by querying a remote server: QI_FMT_REFHEADER %% (%s) at port %d. QI_FMT_REFHEADER %% To see the object stored in the %s database QI_FMT_REFHEADER %% use the -R flag in your query QI_FMT_REFHEADER %% QI_FMT_REFHEADER %%REFERRAL START
# # Referral trailer
QI_REFTRAILER %%REFERRAL END
###################### ### ### DBUPDATE VARIABLES ### ######################
## ## You don't need to change *anything* below this point ## if you are not using dbupdate! ##
########### ## ## Sources ##
# # The update source. The format is: # # (NOTE....this line is split on spaces and commas # so make sure the format is matched exactly.) # # UPDSOURCE SRCname DB-details whois_rip-host,QRY-port,UPD-port # # where # # DB-details = MySQL_Host,MySQL_Port,MySQL_User,MySQL_Password,MySQL_DB
UPDSOURCE SAMPLE sqlhost,3306,dbuser,dbpsw,SAMPLEDB whois.mydb.net,43001,43004
########### ## ## Auth Methods ##
# valid authentication methods accepted by dbupdate
AUTHMETHOD NONE AUTHMETHOD CRYPT-PW AUTHMETHOD MD5-PW AUTHMETHOD PGPKEY
########### ## ## Settings ##
# # Run database sw in test mode? # If set, the mntner and as-block creation requests are # automatically processed and not sent to HUMAILBOX
TESTMODE 0
# # Crypted password to override all security for updates # # Example usage: # # object: My Object # [...] # source: MYSRC # override: Reason_for_overriding_all_security Password # # [ This sample crypted password correspond to the word "password" ]
OVERRIDECRYPTEDPW 1F.5OTsRVjwLo
# # ALLOCMNT # List of maintainers which can create an inetnum object # with status ALLOCATED (one per line or space separated list # or combination of the above)
ALLOCMNT MY-OWN-MNT
########### ## ## Files ##
# ack and notif message templates ACKTEMPLATE /usr/local/whoisd/conf/ack_template NOTIFTEMPLATE /usr/local/whoisd/conf/notif_template FRWDTEMPLATE /usr/local/whoisd/conf/frwd_template FORWCREATETEMPLATE /usr/local/whoisd/conf/forw_create_template
# # UPDATELOCK [not implemented yet] # Name of the lockfile for stopping updates # It will be located in LOCKDIR # Just the existence of this file will block all updates
UPDATELOCK STOPUPDATES
# # The directory where the GPG process stores # the server's public keyring.
PGPPATH /usr/local/whoisd/.gnupg
########### ## ## Commands ##
# # GPGCMD # Full pathname of your gpg executable
GPGCMD /usr/bin/gpg
# # MAILCMD is the command into which a composed e-mail is given as standard # input, to be send as mail. The message piped into this command has ALL # the necessary mail header to process the mail: # From: # To: # Subject: # The mail command should take the recipients from the actual message. # Using sendmail it will be executed as: /usr/lib/sendmail -t < "messagefile" # (default: /usr/lib/sendmail -t) # # NOTE: # -fmy-dbm makes my-dbm the trusted user that will appear on the # envelope. Bounces will go to this address. If you do not specify # this, sendmail will send bounces straight back to the automatic # mailbox, where it will bounce again, and again, .... # User has to be a trusted user, T<name> in sendmail.cf.
MAILCMD /usr/lib/sendmail -fmy-dbm -t
########### ## ## E-mail settings ##
# # HUMAILBOX is a human mailbox, used for forwarding # special objects. IT MUST NOT BE THE AUTOMATIC MAILBOX!!!!
HUMAILBOX my-dbm@mydb.net
# # AUTOBOX is the mailbox used for automatic updates. # The users must send mail to this address (and not # HUMAILBOX) to get their updates processed.
AUTOBOX auto-dbm@mydb.net
# DEFMAIL is the mailbox used when no mail notifications or acknowledgements # both as to and from address in various places.
DEFMAIL my-dbm@ripe.net
########### ## ## nic suffixes ##
NICSUFFIX RIPE NICSUFFIX ORG NICSUFFIX ARIN NICSUFFIX LACNIC NICSUFFIX RADB NICSUFFIX APNIC NICSUFFIX RIPN
########### ## ## Countries ##
## ## A list of valid ISO country codes for inetnum checks ## You probably will never have to modify this ##
COUNTRY AD COUNTRY AE COUNTRY AF COUNTRY AG COUNTRY AI COUNTRY AL COUNTRY AM COUNTRY AN COUNTRY AO COUNTRY AQ COUNTRY AR COUNTRY AS COUNTRY AT COUNTRY AU COUNTRY AW COUNTRY AZ COUNTRY BA COUNTRY BB COUNTRY BD COUNTRY BE COUNTRY BF COUNTRY BG COUNTRY BH COUNTRY BI COUNTRY BJ COUNTRY BM COUNTRY BN COUNTRY BO COUNTRY BR COUNTRY BS COUNTRY BT COUNTRY BV COUNTRY BW COUNTRY BY COUNTRY BZ COUNTRY CA COUNTRY CC COUNTRY CD COUNTRY CF COUNTRY CG COUNTRY CH COUNTRY CI COUNTRY CK COUNTRY CL COUNTRY CM COUNTRY CN COUNTRY CO COUNTRY CR COUNTRY CU COUNTRY CV COUNTRY CX COUNTRY CY COUNTRY CZ COUNTRY DE COUNTRY DJ COUNTRY DK COUNTRY DM COUNTRY DO COUNTRY DZ COUNTRY EC COUNTRY EE COUNTRY EG COUNTRY EH COUNTRY ER COUNTRY ES COUNTRY ET COUNTRY EU COUNTRY FI COUNTRY FJ COUNTRY FK COUNTRY FM COUNTRY FO COUNTRY FR COUNTRY FX COUNTRY GA COUNTRY GB COUNTRY GD COUNTRY GE COUNTRY GF COUNTRY GH COUNTRY GI COUNTRY GL COUNTRY GM COUNTRY GN COUNTRY GP COUNTRY GQ COUNTRY GR COUNTRY GS COUNTRY GT COUNTRY GU COUNTRY GW COUNTRY GY COUNTRY HK COUNTRY HM COUNTRY HN COUNTRY HR COUNTRY HT COUNTRY HU COUNTRY ID COUNTRY IE COUNTRY IL COUNTRY IN COUNTRY IO COUNTRY IQ COUNTRY IR COUNTRY IS COUNTRY IT COUNTRY JM COUNTRY JO COUNTRY JP COUNTRY KE COUNTRY KG COUNTRY KH COUNTRY KI COUNTRY KM COUNTRY KN COUNTRY KP COUNTRY KR COUNTRY KW COUNTRY KY COUNTRY KZ COUNTRY LA COUNTRY LB COUNTRY LC COUNTRY LI COUNTRY LK COUNTRY LR COUNTRY LS COUNTRY LT COUNTRY LU COUNTRY LV COUNTRY LY COUNTRY MA COUNTRY MC COUNTRY MD COUNTRY MG COUNTRY MH COUNTRY MK COUNTRY ML COUNTRY MM COUNTRY MN COUNTRY MO COUNTRY MP COUNTRY MQ COUNTRY MR COUNTRY MS COUNTRY MT COUNTRY MU COUNTRY MV COUNTRY MW COUNTRY MX COUNTRY MY COUNTRY MZ COUNTRY NA COUNTRY NC COUNTRY NE COUNTRY NF COUNTRY NG COUNTRY NI COUNTRY NL COUNTRY NO COUNTRY NP COUNTRY NR COUNTRY NU COUNTRY NZ COUNTRY OM COUNTRY PA COUNTRY PE COUNTRY PF COUNTRY PG COUNTRY PH COUNTRY PK COUNTRY PL COUNTRY PM COUNTRY PN COUNTRY PR COUNTRY PS COUNTRY PT COUNTRY PW COUNTRY PY COUNTRY QA COUNTRY RE COUNTRY RO COUNTRY RU COUNTRY RW COUNTRY SA COUNTRY SB COUNTRY SC COUNTRY SD COUNTRY SE COUNTRY SG COUNTRY SH COUNTRY SI COUNTRY SJ COUNTRY SK COUNTRY SL COUNTRY SM COUNTRY SN COUNTRY SO COUNTRY SR COUNTRY ST COUNTRY SV COUNTRY SY COUNTRY SZ COUNTRY TC COUNTRY TD COUNTRY TF COUNTRY TG COUNTRY TH COUNTRY TJ COUNTRY TK COUNTRY TM COUNTRY TN COUNTRY TO COUNTRY TP COUNTRY TR COUNTRY TT COUNTRY TV COUNTRY TW COUNTRY TZ COUNTRY UA COUNTRY UG COUNTRY UM COUNTRY US COUNTRY UY COUNTRY UZ COUNTRY VA COUNTRY VC COUNTRY VE COUNTRY VG COUNTRY VI COUNTRY VN COUNTRY VU COUNTRY WF COUNTRY WS COUNTRY YE COUNTRY YT COUNTRY YU COUNTRY ZA COUNTRY ZM COUNTRY ZW
-- Engin Gunduz RIPE NCC Software Engineering Department