W dniu 09.03.2019 o 18:07, Maximilian Wilhelm pisze:
Anno domini 2019 Stary Bezpiek scripsit:
Hi,
[...]
What is outdated? That Mikrotik deals V6 mostly in software? That Cisco 6800 series (still pretty wide used) is not ready to full support of today's IPv6 world? Could you please elaborate on the shortcomings here?
Mikrotik example: a) Take true 1Gig uplink to the internet b) take Mikrotik device with mipsbe processor, configure it to enable only V6 and perform a speedtest to the fast.com for example c) The same device enable v4 only and use HW offloads, fastpath, fasttrack and so on and perform the test from b) d) keep v4 only, disable HW offloads, fastpath fast track and perform the test e) compare results with a) f) try all above with PPPoE and compare My results: with v4 and all HW offload supports you can expect about 920 Mbps. With pure v6 - about 400 Mbps, same or even less with HW offloads disabled. Cisco: Cisco 6880-X - here we have no problems witch ipv4 and ipv6, but no 40G or bigger line cards. Only 10Gig cards is little to less in our IPv6 world. Cisco 6800 "legacy series" (quotes intended, hope you know what I mean) you have to observe combinations with "E" cassis to support appropriate supervisor avoiding ipv6 multicast limitations, 1M ipv4 prefixes limit with supervisors even XL, the 40Gig ports available only in 6807 SUP6T chassis of course with "E" SUP without XL only 128k ipv6 routes, and many others dependencies and complexities. I forgot about 6500/7600 series also still wide used - problem with shared FIB making it practically poor usable for v6, when you make place for v4 prefixes. Hope this helps. -- stary.bezpiek